StarTech.com DH5102E Manuel utilisateur

10/100 Fast Ethernet

Dual Speed Hub

Installation Manual

DH5102E

DH8100E

DH16100E

Introduction

The StarTech.com Dual Speed Fast Ethernet desktop hubs are

small in size but big in value. They provide 2 powerful modes of

operation: dual speed mode, or extension mode. Extension mode

allows the hub to cascade from up to 100m away, breaking the

standard 10m hub distance limit of 100BaseT Ethernet. Each port

has 2 LED indicators that show the link speed and activity for

quick and easy monitoring.

Features

1. Consists of 1 internal 10Mbps Ethernet segment and 1 internal

100Mbps Fast Ethernet segment.

2. Supports auto-negotiation RJ45 ports which automatically sense

and select optimum speed and route data traffic to

corresponding internal segments.

3. Built in uplink port to connect with regular straight-through

cable to connect to another hub.

4. Built in internal switching function automatically switches data

traffic between devices running at different speed, as well as

establishes communications between ports running at 10Mbps

and 100Mbps.

5. Provides 1 Extension port that can be linked to another Fast

Ethernet hub up to 100 meters.

6. Wall mountable.

7. 2-year warranty.

Specifications

Standards IEEE 802.3, IEEE 802.3u

Connectors RJ45

Dimensions 5 port: 127 x 83 x 30 mm / 5.0 x 3.27 x 1.18 in.

8 port: 187 x 100 x 30 mm / 7.4 x 3.94 x 1.18 in.

16 port: 290 x 100 x 30 mm / 11.4 x 3.94 x 1.18 in.

Weight: 5 port: 180g / 0.40lb.

8 port: 370g / 0.81lb.

16 port: 480g / 1.16lb.

Operating

Humidity 10~95% (non-condensing)

Package Contents

1 x Fast Ethernet Switch

1 x external power adapter

LED

Installation

1. Connect a Category 5 patch cable to the RJ45 jack on your

computer’s network card. (The RJ45 jack looks like an over-

sized phone jack).

StatusLED Description Number of LED

PWR

(Power)

COL

Power is supplied

No Power

One for the

whole Hub

One for 10Mbps

segment and one

for 100Mbps

One for each port

Collision detected in this segment

No Collision

A valid link is established

Data packets received

No link is established

Port is running at 100Mbps

Not connected or running at 10Mbps

Lit

Off

Lit

Off

Lit

Flash

Off

Lit

Off

LNK/ACT

(Link/Activity)

COL/FDX

(Collision/Full Duplex)

2. Connect the other end of the cable to a numbered port on the

hub (not to the uplink port).

3. Once the network cable is connected to both ends and the

attached network device is powered on, the green LNK/ACT

LED light should be lit.

4. Repeat these steps for the remainder of the computers you

would like to network.

An uplink port is used to connect to another hub/switch using

regulat straight-through UTP cable.

Troubleshooting

1. Power LED is not lit

Check if the power cord is properly connected to the external

power adapter and the power outlet. Make sure the DC power

jack is firmly plugged into the power socket of the switch.

2. Link Status LED is not lit

Check the power switch of the devices connected to the hub;

make sure they are turned ON. Check the network cables; make

sure they are properly connected to the hub and the

network devices.

Check the network cables; make sure the cables comply with

EIA/TIA 568 specifications. Use straight-through Category 5

cables for 100Mbps connection and Category 3 or higher cables

for 10Mbps connection.

3. Collision LED flashes constantly

Remove all the network cables; connect the cables back one by

one to isolate the source of the collision.

Check the network cable, inferior cable quality will result in

excessive collision and error packets.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels StarTech.com Changer

StarTech.com

StarTech.com SV431USBAEGB Manuel utilisateur

StarTech.com

StarTech.com IES1G52UP12V Manuel utilisateur

StarTech.com

StarTech.com StarView SV431H Manuel utilisateur

StarTech.com

StarTech.com SV231DVIUAHR Manuel utilisateur

StarTech.com

StarTech.com SV1115IPEXT Manuel utilisateur

StarTech.com

StarTech.com MSTCDP123HD Manuel utilisateur

StarTech.com

StarTech.com VS410DVIR Manuel utilisateur

StarTech.com

StarTech.com ICUSB23216FD Manuel utilisateur

StarTech.com

StarTech.com ST4200USBM Manuel utilisateur

StarTech.com

StarTech.com MSTCDP122HD Manuel utilisateur

StarTech.com

StarTech.com VS420RDVIA Manuel utilisateur

StarTech.com

StarTech.com 8ST35BAYUSB3S4 Manuel utilisateur

StarTech.com

StarTech.com IES101G2SFPW Manuel utilisateur

StarTech.com

StarTech.com VS421CPNTA Manuel utilisateur

StarTech.com

StarTech.com SVID410IR Manuel utilisateur

StarTech.com

StarTech.com IES51000POE Manuel du système

StarTech.com

StarTech.com P2DD46A2-KVM-SWITCH Manuel utilisateur

StarTech.com

StarTech.com Starview SV231USBANGB Manuel utilisateur

StarTech.com

StarTech.com IES51000POE Manuel utilisateur

StarTech.com

StarTech.com C2-DD46-UA2-CBL-KVM Manuel utilisateur

StarTech.com

StarTech.com SV231U3A Manuel utilisateur

StarTech.com

StarTech.com HDVGADP2HD Manuel utilisateur

StarTech.com

StarTech.com 129N-USBC-KVM-DOCK Manuel utilisateur

StarTech.com

StarTech.com ICUSB2328 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur