StarTech.com PEX2S5521P Manuel utilisateur
Dual Prole PCI-Express RS-232 Serial Card
(2 port Serial, 1 port Parallel*)
*PEX2S5521P
PEX1S552
PEX2S552
Instruction Guide
*PEX2S5521P shown
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver•
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowl-
edges that all trademarks, registered trademarks, service marks, and other protected names
and/or symbols contained in this manual and related documents are the property of their
respective holders.
Instruction Manual
i
Instruction Manual
Table of Contents
Introduction ................................................................................... 1
Features ......................................................................................1
Package Contents .......................................................................1
Hardware Guide ............................................................................. 2
Installation...................................................................................... 2
Hardware Installation...................................................................2
Software Installation ....................................................................4
Verifying Successful Installation ..................................................6
Specifications ................................................................................ 7
Technical Support ......................................................................... 8
Warranty Information .................................................................... 8
Instruction Manual
1
Introduction
Thank you for your purchase of a StarTech.com PEX1S552/PEX2S552/
PEX2S5521P Dual Profile PCI Express card. This convenient I/O solution
utilizes a native, single-chip design for maximum performance and reli-
ability, and includes an optional low profile bracket that allows the card to
be installed in virtually any size/form factor case.
Features
Native PCI Express (single chip)•
Adds two high speed RS-232 serial ports, one parallel port•
Supports data transfer rates of up to: 2.7 Mbps (parallel)•
460.8 Kbps (serial)
Configurable in 5V, 12V, and RI (non-powered) modes•
Compliant with PCI Express base specifications revision 1.0a•
128-byte deep FIFO per transmitter and receiver•
Automated in-band flow control using programmable Xon/Xoff in both•
directions
Automated out-of-band flow control using CTS/RTS and DSR/DTR•
Standard and low profile bracket included•
Package Contents
1 x 2 Port PCI-Express RS-232 Serial Card•
1 x Separate parallel port (with ribbon cable)•
1 x Driver CD•
1 x Instruction Manual•
Low Profile Brackets:• PEX1S552 - 1 low profile bracket included
PEX2S552 - 2 low profile brackets included
PEX2S5521P – 3 low profile brackets included
Instruction Manual
2
Hardware Guide
Installation
Serial Port #1
Serial Port #2
(PEX2S552,
PEX2S5521P)
Parallel Port
Connector
(PEX2S5521P)
LP4
Power Port
**PEX2S5521P Shown
WARNING! PCI Express cards, like all computer equipment, can be se-
verely damaged by static electricity. Be sure that you are properly ground-
ed before opening your computer case or touching your card. StarTech.
com recommends that you wear an anti-static strap when installing any
computer component. If an anti-static strap is unavailable, discharge your-
self of any static electricity build-up by touching a large grounded metal
surface (such as the computer case) for several seconds. Also be careful
to handle the card by its edges and not the gold connectors.
Instruction Manual
3
Setting Power Mode
This card is specially designed to allow for power output from the ninth
pin of the DB9 connector(s) for devices that support power over serial.
This card allows users to set each port with 5V, 12V, or RI (no power).
Users can also choose to draw the necessary power from the system
power supply by connecting to the LP4 power connector.
Hardware Installation
Remove the cover of your system (see your computer’s user manual1.
for details, if necessary) and gently turn your computer onto its side,
so that the PCI Express expansion slot openings on the motherboard
are facing upwards.
Locate an empty PCI Express slot and remove the metal plate that2.
covers the corresponding rear bracket. You may need a Phillips screw
driver to perform this step. Retain the screw! You will need it to secure
the card later.
PEX2S5521P Only: Please ensure that the metal plate that covers the
rear bracket adjacent to the above mentioned bracket is vacant, so that
it can be used for parallel port installation).
Gently insert the card into the empty slot, making sure it is firmly3.
seated, then secure the card in place using the screw you removed in
Step 3.
PEX2S5521P:4. Connect the ribbon cable provided by the (separate)
parallel port to the provided slot on the PEX2S5521P board (please
Instruction Manual
4
see diagram on previous page), then secure the parallel port to the slot
adjacent to the one used to secure the main PEX2S5521P board.
Once the card (and additional port, if necessary) are secured to the5.
motherboard (and within the case), replace the computer cover and
power on the computer, then proceed to the next section, titled Soft
ware Installation.
Software Installation
When the computer is booted up following the physical installation of the
PCI Express card, the operating system will detect the presence of the
card within the computer system and prompt for software installation:
Instruction Manual
5
The Found New Hardware Wizard will appear. When asked if you want1.
Windows to search for software, select No, not this time, then click
Next to continue:
On the screen that follows, select2. Install from a list or specific
location, then click on Next.
On the screen that follows, select3. Search for the best driver in these
locations. Ensure there is a checkmark next to Include this location
in the search, then click Browse to locate the correct file. (Please
note: The correct file can be located on the accompanying CD in the
MCS9901 folder).
Once you’ve specified the correct file, please click Next to continue.
A Windows security warning will appear, notifying you that the software4.
Instruction Manual
6
you are installing has not passed Windows Logo testing. Please click
on Continue Anyway:
Once the driver files have been installed, you will be notified that the5.
Wizard has finished installing the software for “High Speed PCIe Serial
Port”. Please click on Finish.
PEX2S552:6. Repeat steps 1-5 once more for the remaining serial port
to be installed.
PEX2S552: Repeat steps 1-5 twice more, once for each of the
remaining ports (one serial, one parallel).
Verifying Successful Installation
To verify that installation was successful:
Right-click on1. My Computer and select Manage to open the Computer
Management window.
In the left pane, select2. Device Manager.
In the right pane, click on3. Ports (COM & LPT). You should see the
newly added ports listed here:
Instruction Manual
7
Specications
PEX1S552 PEX2S552 PEX2S552
Bus Type PCI Express
Chipset Moschip MCS9901CV
Maximum
Data Transfer
Rate
Serial:
460.8 Kbps
Serial:
460.8 Kbps
Parallel:
2.7 Mbps
Serial:
460.8 Kbps
OS Support
Windows® 2000/XP/2003/Vista™
Linux Kernel 2.6.11 and above
MAC OS 10.4 & above
Connectors 1 x RS-232 Serial 2 x RS-232 Serial 2 x Serial
1 x Parallel
Product
Dimensions
(LxWxH)
105mm (4.13”) x 120mm (4.72”) x 20mm (0.79”)
Product
Weight 51.5 g (1.82 oz ) 63.5 g (2.24 oz ) 140 g (4.94oz )
Regulatory
Certifications CE, FCC, RoHS
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels StarTech.com Carte PCI
StarTech.com
StarTech.com 8STPEX1394B3 Manuel utilisateur
StarTech.com
StarTech.com PCI420USB Manuel utilisateur
StarTech.com
StarTech.com PCI2S4851050 Manuel utilisateur
StarTech.com
StarTech.com PCI1394_4 Manuel utilisateur
StarTech.com
StarTech.com PCICOMBO Manuel utilisateur
StarTech.com
StarTech.com PCI1394 2LP Manuel
StarTech.com
StarTech.com PCI1PECPDV Manuel utilisateur
StarTech.com
StarTech.com PCI1P2 Manuel utilisateur
StarTech.com
StarTech.com ST1000BTPEX Manuel utilisateur
StarTech.com
StarTech.com PEX2S553B Manuel du système
StarTech.com
StarTech.com PCI2S485LP Manuel utilisateur
StarTech.com
StarTech.com MPEX4S552 Manuel utilisateur
StarTech.com
StarTech.com PCIUSB3S22 Manuel utilisateur
StarTech.com
StarTech.com 8STPEXUSB3S11 Manuel utilisateur
StarTech.com
StarTech.com PEX8S1050LP Manuel utilisateur
StarTech.com
StarTech.com PEX1394A2V2 Manuel utilisateur
StarTech.com
StarTech.com PEXSATA24E Manuel utilisateur
StarTech.com
StarTech.com PCISCSIU2W Manuel utilisateur
StarTech.com
StarTech.com ISA2S550 Manuel
StarTech.com
StarTech.com USB32HDCAPRO Manuel utilisateur
Manuels Carte PCI populaires d'autres marques
Belkin
Belkin F5D7000F Manuel utilisateur
Pericom
Pericom PI7C7100 Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-3548 Manuel utilisateur
Digium
Digium TE200 Series Manuel utilisateur
Allo.com
Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur
Western Digital
Western Digital FireWire PCI Adapter Manuel utilisateur