StarTech.com SAT2510BU2E Manuel utilisateur

Serial ATA Hard Drive

Enclosure

2.5” eSATA/USB External Hard

Drive Enclosure for Serial ATA

Hard Drives

SAT2510U2E

SAT2510BU2E

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver•

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an

endorsement of the product(s) to which this manual applies by the third-party company

in question. Regardless of any direct acknowledgement elsewhere in the body of

this document, StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this

manual and related documents are the property of their respective holders.

Table of Contents

Introduction..................................................................... 1

Packaging Contents.....................................................................1

System Requirements .................................................................1

Installation....................................................................... 2

Hardware Installation...................................................................3

Driver Installation.........................................................................4

Verifying Installation.....................................................................5

How to Use ...................................................................... 5

Speciﬁcations.................................................................. 7

Technical Support........................................................... 8

Warranty Information...................................................... 8

Introduction

This External Hard Drive Enclosure transforms most 2.5” SATA hard

drives into a cost-effective portable storage solution . The 2.5” SATA

hard drive enclosure connects to a host computer using USB 2.0

or eSATA with support for data transfer rates of up to 3Gbps (using

eSATA) or 480Mbps (through USB 2.0).

Packaging Contents

1 x SAT2510U2E or SAT2510BU2E enclosure•

1 x eSATA cable•

1 x USB cable•

1 x Driver CD•

1 x Instruction Manual•

System Requirements

Available USB 2.0 or eSATA port on computer system•

Microsoft Windows• ®2000/XP/Server 2003/Vista (32/64-bit),

Mac OS®X, Linux®

Installation

WARNING: Hard drives require careful handling, especially when

being transported. If you are not careful with your hard disk, lost data

may result. Always handle your hard drive and storage device with

caution.

WARNING: Hard drives, like all computer equipment can also be

severely damaged by static electricity. Be sure that you are properly

grounded before opening your computer case or touching any

components. StarTech.com recommends that you wear an anti-static

strap when installing any computer equipment. If an antistatic strap

is unavailable, discharge yourself of any static electricity build-up by

touching a large grounded metal surface (such as the computer case)

for several seconds.

Power

connector

eSATA USB Power/Activity

LED

Hardware Installation

Remove the screws from the enclosure, and remove the rear panel1.

cover. Pull the front panel out of the enclosure:

Attach the 2.5” SATA hard drive to the connector provided:2.

Insert the front panel (with drive attached) into the rear panel3.

(enclosure).

Fasten the front panel (with drive attached) to the rear panel4.

(enclosure), using the screws removed in step #1.

To connect the hard drive enclosure to a host computer using USB,5.

simply insert the included USB cable into the USB type Mini B slot

provided by the enclosure, and the remaining end into an available

USB type A slot on the host computer.

To connect the hard drive enclosure to a host computer using6.

eSATA, simply plug the included eSATA cable from the enclosure to

the host computer. To provide power to the enclosure, connect the

USB to DC cable (provided) to an available USB port on the host

computer, and insert the remaining end into the power port located

on the hard drive enclosure.

Driver Installation

Windows 2000/XP/Server 2003/Vista, Mac OS X, Linux

No driver installation is required for these operating systems, as this

enclosure is natively supported, so the drivers are already installed.

Verifying Installation

Windows 2000/XP/Server 2003/Vista

From the main desktop, right-click on “My Computer” (“Computer” in

Vista), then select Manage. In the new Computer Management window,

select Device Manager from the left window panel.

Double-click on the “Disk Drives” option. A new disk drive should be

listed under this category. It will typically contain the make/model of

the hard drive you have installed in the enclosure.

How to Use

Windows 2000/XP/Server 2003/Vista

Right-click on My Computer, and select Manage.1.

Select Disk Management, in the left pane. In the right pane, you2.

should notice the new hard drive:

Right-click on the Unallocated block, and select New Partition.3.

This will launch the New Partition Wizard. Please follow the4.

instruction provided by the Wizard, to partition the drive for use.

Once the partition has been created, the drive installed within the5.

hard drive enclosure will be recognized as a New Volume in Disk

Management, as well as in My Computer:

Specications

Bus Interface USB 2.0

SATA 3Gb/s

External Connectors

1 x USB mini B

1 x eSATA port

1 x DC power connector

Chipset JMircon JM20316

LEDs 1 x Power/Activity

Maximum Data Transfer Rate USB: 480 Mb/s

eSATA: 3 Gb/s

Hard Drive Compatibility 2.5” SATA 1.5 and 3 Gb/s hard

drives, 9.5mm height

Dimensions 133.0 mm x 72.0 mm x 13.0 mm

Weight 90 g

Compatible Operating

Systems

Windows 2000/XP/Server 2003/

Vista, Mac OS X, Linux

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels StarTech.com Enceinte

StarTech.com

StarTech.com SAT3520UERGB Manuel utilisateur

StarTech.com

StarTech.com IDE3510U2GB Manuel utilisateur

StarTech.com

StarTech.com HSB1SATSASVA Manuel utilisateur

StarTech.com

StarTech.com IDECASE525U2 Manuel utilisateur

StarTech.com

StarTech.com IDECASE525F Manuel utilisateur

StarTech.com

StarTech.com S252BU313R Manuel utilisateur

StarTech.com

StarTech.com SM2NGFFMBU33 Manuel utilisateur

StarTech.com

StarTech.com SM21BMU31C3 Manuel utilisateur

StarTech.com

StarTech.com SAT1810U2 Manuel utilisateur

StarTech.com

StarTech.com S2510BU3PW Manuel utilisateur

StarTech.com

StarTech.com SAT3550ESR Manuel utilisateur

StarTech.com

StarTech.com SM21BMU31CI3 Manuel utilisateur

StarTech.com

StarTech.com RK1219WALL Manuel utilisateur

StarTech.com

StarTech.com UNI2510U2V Manuel utilisateur

StarTech.com

StarTech.com InfoSafe UNI3510U2E Manuel utilisateur

StarTech.com

StarTech.com IDECASE18U2B Manuel utilisateur

StarTech.com

StarTech.com SAT3510U2REM Manuel utilisateur

StarTech.com

StarTech.com S2510BPU33 Manuel utilisateur

StarTech.com

StarTech.com SAT3540ER2 Manuel utilisateur

StarTech.com

StarTech.com InfoSafe SAT2510BU2B Manuel utilisateur

StarTech.com

StarTech.com RK1219WALH Manuel utilisateur

StarTech.com

StarTech.com INFOSAFE SAT2510BU2 Manuel utilisateur

StarTech.com

StarTech.com SAT2510U2F Manuel du système

StarTech.com

StarTech.com RK12WALHM Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur