StarTech.com S251BU31315 Manuel utilisateur

Manual Revision: 08/25/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/S251BU31315.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

S251BU31315

Drive Enclosure for 2.5” SATA

SSD/HDD - USB 3.1 (10Gbps)

*actual product may vary from photos

Quick-start guide

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Quick-start guide

Table of Contents

Introduction............................................................................................1

Product diagram........................................................................................................................................ 1

Package contents...................................................................................................................................... 2

System requirements............................................................................................................................... 2

About USB 3.1 Gen 2................................................................................................................................ 2

Install a drive...........................................................................................3

Connect a drive to your computer ......................................................3

Prepare a drive for use ..........................................................................4

Windows OS................................................................................................................................................ 4

Mac OS .......................................................................................................................................................... 5

About the LED indicator........................................................................5

Technical support...................................................................................6

Warranty information............................................................................6

Quick-start guide

Introduction

You can use the S251BU31315 drive enclosure to access, transfer, and back up the data

stored on your 2.5 in. SSDs and HDDs. In addition to drives that are between 7 and

9.55 mm in height, the S251BU31315 also ts drives that are up to 15 mm high. The

S251BU31315 features USB 3.1 Gen 2 and SATA support.

Product diagram

Drive enclosure

*actual product may vary from photos

LED indicator

USB 3.1 Micro-B port

Enclosure screw

Drive tray

Drive connector

Drive-mount holes Drive-mount holes

Cutout

Quick-start guide

Package contents

• 1 x drive enclosure

• 1 x screwdriver

• 1 x USB-C to Micro-B cable

• 1 x USB-A to Micro-B cable

• 5 x drive-mount screws

• 3 x enclosure screws

• 1 x quick-start guide

System requirements

• USB enabled computer system with an available USB port

• 2.5 in. SSD or HDD

This drive enclosure is OS independent and doesn’t require any additional drivers or

software.

To obtain the maximum USB throughput, you must use a system with a USB 3.1 Gen 2

(10Gbps) port.

System requirements are subject to change. For the latest requirements, please visit

www.StarTech.com/S251BU31315.

About USB 3.1 Gen 2

USB 3.1 is also known as USB 3.1 Gen 2. This connectivity standard supports speeds up

to 10Gbps.

Quick-start guide

Install a drive

Warning! Drives should be handled carefully, especially when they’re transported.

If you’re not careful with your drives, you may lose data as a result. Always handle

storage devices with caution. Make sure that you’re properly grounded by wearing an

anti-static strap when you install any computer component. If an anti-static strap isn’t

available, touch a large grounded metal surface for several seconds to discharge any

built-up static electricity.

1. If the Enclosure screws are installed, use the provided screwdriver to remove the

screws from the sides of the drive enclosure.

2. Pull out the drive tray.

3. Gently slide the connector on your SATA drive into the corresponding Drive

connector on the drive tray. The connector on your SATA drive is keyed so that it

only ts one way.

4. Insert four of the drive-mount screws through the Drive-mount holes in the bottom

of the drive tray and into the drive.

5. Use the provided screwdriver to tighten the screws in place.

6. Slide the drive tray back into the drive enclosure.

7. Insert one of the Enclosure screws on each side of the drive enclosure.

8. Use the provided screwdriver to tighten the screws in place.

To remove a drive from the drive tray, push up on the drive through the square Cutout

on the underside of the drive tray.

Connect a drive to your computer

Note: To accommodate the type of USB port that your computer is equipped with, a

USB-A to Micro-B and a USB-C to Micro-B cable are provided with the drive enclosure.

When you connect the drive enclosure to your computer, make sure that you use the

cable that’s appropriate for your computer.

• After you install a drive in the drive enclosure, connect one of the provided USB

cables to the enclosure’s USB 3.1 Micro-B port and to the USB port on your

computer.

When you connect the drive enclosure to your computer and the OS automatically

installs the necessary software, the drive is accessible as though it’s installed internally

in the system. Before you use the drive, you need to prepare it for use and format it to

the requirements of your OS. For more information, see the“Prepare a drive for use”

topic.

Note: The drive enclosure doesn’t require an external power supply, as it receives

enough power through the USB bus that it’s connected to.

Quick-start guide

Prepare a drive for use

Windows OS

If you install a drive that already has data on it, after you connect the drive to your

computer, it appears under My Computer or Computer with a drive letter assigned

to it.

If you install a brand-new drive that doesn’t contain any data, you must prepare the

drive for use.

Warning! When you complete the following steps, all of the data on your drive will be

deleted. If your drive has data on it that you require, you should create a backup le or

use a dierent drive.

1. Depending on the OS version that you’re running, do one of the following:

• On your desktop, right-click My Computer and click Manage.

• On your desktop, right-click Computer and click Manage.

• Click the Start button or Windows icon. Enter compmgmt.msc and press

Enter.

2. On the Computer Management screen, click Disk Management.

3. A dialog window appears and asks you to initialize the drive. Depending on the

version of Windows that you’re running, you have the option to create either an

MBR or a GPT disk.

Note: GPT (GUID partition) is required for drives larger than 2 TB, but GPT isn’t

compatible with some earlier versions of operating systems. MBR is supported by both

earlier and later versions of operating systems.

4. Locate the disk that is labeled Unallocated. To conrm that the drive is the correct

one, check the drive capacity.

5. Right-click the section of the window that says Unallocated and click New Partition.

6. To initialize the drive in the format of your choice, complete the on-screen

instructions.

When the drive is successfully installed, it appears under My Computer or Computer

with a drive letter assigned to it.

Quick-start guide

Mac OS

If you install a brand-new drive that doesn’t contain any data, you must prepare the

drive for use.

Warning! When you complete the following steps, you create a partition that uses the

entire drive space.

1. Do one of the following:

• In Spotlight, enter Disk Utility.

• Open Finder. Navigate to Applications and click Utilities. Open Disk Utility.

2. Select the new drive and click the Partition tab.

3. Enter a name for the partition.

4. Click Apply.

The drive should now appear on your desktop and be accessible in Finder.

About the LED indicator

The S251BU31315 features a blue LED indicator. For more information about the LED

indicator, see the table below.

LED behavior Signicance

LED is illuminated The drive enclosure is receiving power

LED is illuminated and blinking The drive is being accessed

Instruction manual

Technical support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship

for the periods noted, following the initial date of purchase. During this period,

the products may be returned for repair, or replacement with equivalent

products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels StarTech.com Enceinte

StarTech.com

StarTech.com M2E1BMU31C Manuel utilisateur

StarTech.com

StarTech.com USB2SLSATINT Manuel utilisateur

StarTech.com

StarTech.com SAT3510U3V Manuel utilisateur

StarTech.com

StarTech.com InfoSafe S252U2ERR Manuel utilisateur

StarTech.com

StarTech.com RK1019SIDEM Manuel utilisateur

StarTech.com

StarTech.com InfoSafe SAT2510BU2B Manuel utilisateur

StarTech.com

StarTech.com SAT2510BU2E Manuel utilisateur

StarTech.com

StarTech.com S2510BU3PW Manuel utilisateur

StarTech.com

StarTech.com IDECASE525U2 Manuel utilisateur

StarTech.com

StarTech.com SMS2BU31C3R Manuel utilisateur

StarTech.com

StarTech.com SAT2510B12U3 Manuel utilisateur

StarTech.com

StarTech.com RK830WALVS Manuel utilisateur

StarTech.com

StarTech.com RK1219WALHM Manuel utilisateur

StarTech.com

StarTech.com IDECASE35U2B Manuel utilisateur

StarTech.com

StarTech.com InfoSafe IDECASE35U2 Manuel utilisateur

StarTech.com

StarTech.com SAT5210U2E Manuel utilisateur

StarTech.com

StarTech.com IDECASE35NAS Manuel utilisateur

StarTech.com

StarTech.com MADE EASY HSB110SATBK Manuel utilisateur

StarTech.com

StarTech.com S251BPU313 Manuel utilisateur

StarTech.com

StarTech.com HSB1SATSASVA Manuel utilisateur

StarTech.com

StarTech.com SAT3510BU3 Manuel utilisateur

StarTech.com

StarTech.com 2636CABINET Manuel utilisateur

StarTech.com

StarTech.com S2510BPU33 Manuel utilisateur

StarTech.com

StarTech.com SAT35401U Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur