StarTech.com 2636CABINET Manuel utilisateur

Manual Revision: 01/17/2019

For the most up-to-date information, please visit: www.startech.com

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

IT: Guida per l’uso - it.startech.com

JP: 取扱説明書 - jp.startech.com

2636CABINET

Black Standard Universal Server Rack Cabinet Shelf

*actual product may vary from photos

Instruction Manual

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction ...........................................................................................1

Package Contents ..................................................................................................................................... 1

Installation ..............................................................................................2

Posts............................................................................................................................................................... 2

Doors ............................................................................................................................................................. 3

Changing the door position.................................................................................................................. 4

Stabilizer Feet ............................................................................................................................................. 5

Front Legs .................................................................................................................................................... 5

Technical Support ..................................................................................10

Warranty Information............................................................................10

Instruction Manual

WARNING! To prevent bodily injury, please ensure that the rack is installed in a

structurally sound environment with a level oor and that all hardware has been

assembled securely, and checked for stability before loading equipment. When

installing equipment into the rack, start from the bottom of the rack rst and move

upwards, keeping the heaviest equipment at the bottom to avoid a situation where

the rack becomes top-heavy.

Introduction

The Rack cabinet is a high quality, lockable, secure and dust-reduced environment for

rackmount servers and network equipment. This sturdy, space-saving unit is made

from extruded aluminum for an appealing appearance. A standard lockable smoked

plexiglass see-through front door and solid aluminum rear door provides quick

access to equipment. The internal front and rear mounting rails are completely depth

adjustable to t virtually any piece of equipment. A standard roof-mounted triple

motor AC fan unit and high-ow air lter below the rear door provide up to 300 CFM

of bottom to top air ow through the cabinet, removing the heat produced by the

enclosed equipment. In addition to the standard equipment that are options on most

other cabinets, the Rack cabinet also has a full compliment of optional accessories

like xed shelving, storage drawers, keyboard drawers, front panel spacer plates and

slide-out shelves.

Package Contents

• 1 x 15U Cabinet Equipment Rack 26x36x19 inch

• 42 x Cage nuts

• 30 x M5 Rack screws

• 2 x keys

Requirements

For the latest requirements, please visit www.startech.com/2636CABINET

Installation:

• 1 x Wrench

• 1 x 13 mm Socket

Instruction Manual

Unpacking the Rack

Warnings: The Rack is heavy and you should exercise caution when you remove it

from the pallet.

At least three people are required to unpack the Rack. Do not attempt to unpack the

Rack by yourself.

1. Carefully move the shipping pallet to a level surface.

2. Using a Socket and Wrench, remove the Bolts from the Brackets.

3. Carefully remove the Rack from the pallet and place it on a rm surface.

Securing the Rate to the Floor

You can use the Brackets and Bolts used to secure the Rack to the shipping pallet to

securely fasten the Rack to the oor.

1. Carefully place the Rack onto a at surface.

1. Align the Bracket with the Bracket Hole on the Rack.

2. Insert two of the Bolts through the Bracket and into the Rack. Tighten the Bolts

using a Socket and Wrench.

3. Insert the other two Bolts through the Bracket and into the surface you are

securing the Rack to.

Note: Pilot holes may need to be drilled in the surface you are securing the Rack to

prior to installing the Bracket.

Installation

Posts

Depending on the size of the device you are mounting or the type of mounting

brackets that are used, you may want to move the posts forward or back, or replace

the cabinets posts. To do this, simply remove the front and back posts from the xed

rails by removing the screws which secure them to the rails. Move the nuts to the

location where you would like the post to go. Align the holes on the posts with the

nuts and secure the posts to the rails.

1. For the posts you will need to insert the cage nuts, which are supplied, where you

would like the device to go. To insert the cage nut press on either side of the nut.

Insert the clamps into the hole and release the nut. Screw the device into place.

2. If your device has mounting brackets with hooks, just hook the bracket to the

position where you want your device to go.

Instruction Manual

Doors

There are 2 doors on each cabinet. Both the front and rear doors are removable. To

remove them

1. Pull down the top tab while holding the door with the other hand. The top

should fall out of place.

2. Pull up on the bottom tab and lift door out of the frame. The same method can

be applied to the rear door.

Changing the Door Position

1. Inside the top corner of the door frame, pull down the Door Hinge Release Tab.

2. While holding the top Door Hinge Release Tab, tilt the bottom on the door

forward and lift the bottom Door Peg out of the Mounting Hole and set the door

aside.

3. Using a Phillips Head Screwdriver, remove the two screws holding the Locking

Plate in place.

4. Using a Phillips Head Screwdriver, remove the two door stoppers from the top

and bottom of the door frame.

5. Insert the bottom Door Peg into the Mounting Hole on the door frame. Keeping

in mind the orientation on the Door Handle.

6. Pull down the top Door Hinge Release Tab and align the Door Peg with the

Mounting Hole. Release the Door Hinge Release Tab once the Door Peg is aligned

with the Mounting hole.

7. Align the Lock on the Door with two of the Mounting Nuts on the slide rail.

Ensuring that when the Locking Plate is attached to the Mounting Nuts that the

Locking Plate will catch the Door Lock when the door handle is turned.

Note: When attaching the Locking Plate use two of the middle Mounting Nuts leaving

at least one Mounting Nut on either side, for use when attaching the Door Stoppers.

8. Align the Locking Plate with the two Mounting Nuts on the Slide Rail, making

sure that the raise portion of the Locking Plate is facing out.

9. Insert the two Locking Plate Screws through the Locking Plate and into the

Mounting Nuts. Tighten the screws using a Phillips Head Screwdriver.

10. On the same side of the door frame as the Locking Plate, align a Mounting Nut in

the top and bottom corners on Slide Rail.

11. Align the Stoppers with the Mounting Nuts positioned in step 10.

12. Insert a Stopper screw through the Stopper and into the Mounting Nut. Tighten

the screws using a Phillips Head Screwdriver.

Instruction Manual

Stabilizer Feet

Though each cabinet is equipped with wheels for easy movement, there may be times

when you would prefer that the cabinet not be mobile. There are two adjustable legs

on the back of the cabinet. To lower them, use a wrench and turn them until the legs

are lowered enough that the wheels are slightly o the ground.

Front Legs

There are two leveler legs on the front of the cabinet. We suggest that they be used to

ensure that the cabinet does not tip forward when a heavy drawer is pulled out. To do

this, grab the end of the legs and pull them towards you.

Instruction Manual

Removing/Cleaning the Air Filter

1. Using a Phillips Head Screwdriver, remove the four Air Filter Housing Screws

located at the back of the rack, below the door.

2. Pull at Air Filter Housing out of the Air Filter Slot.

3. Wipe both side of the Air Filter down with a dry or slightly damp cloth.

4. Align the Air Filter Housing back into the Air Filter Slot.

5. Insert the four Air Filter housing screws and tighten them using the Phillips Head

Screwdriver.

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a lifetime warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Table des matières

Autres manuels StarTech.com Enceinte

StarTech.com

StarTech.com INFOSAFE SAT3540ER Manuel utilisateur

StarTech.com

StarTech.com S251BMU313 Manuel utilisateur

StarTech.com

StarTech.com InfoSafe IDECASE25OTG Manuel utilisateur

StarTech.com

StarTech.com ESATCASE2 Manuel utilisateur

StarTech.com

StarTech.com S3510BMU33T Manuel du système

StarTech.com

StarTech.com 25SATSAS35HD Manuel utilisateur

StarTech.com

StarTech.com SAT3520U2R Manuel utilisateur

StarTech.com

StarTech.com INFOSAFE IDE2510U2 Manuel utilisateur

StarTech.com

StarTech.com 4POSTRACK25 Manuel utilisateur

StarTech.com

StarTech.com INFOSAFE IDE2510U2 Manuel utilisateur

StarTech.com

StarTech.com SECTBLTPOS2 Manuel utilisateur

StarTech.com

StarTech.com SAT2510BU2E Manuel utilisateur

StarTech.com

StarTech.com SAT3510U2F Manuel utilisateur

StarTech.com

StarTech.com IDE1810U2Z Manuel utilisateur

StarTech.com

StarTech.com HSB1SATSASVA Manuel utilisateur

StarTech.com

StarTech.com S251BU31C3CB Manuel utilisateur

StarTech.com

StarTech.com S352BU33HR Manuel utilisateur

StarTech.com

StarTech.com SAT2510U2F Manuel utilisateur

StarTech.com

StarTech.com S3520WU33ER Manuel du système

StarTech.com

StarTech.com S252BU33R Manuel utilisateur

StarTech.com

StarTech.com S3520BU33ER Manuel du système

StarTech.com

StarTech.com INFOSAFE SAT2510U2 Manuel utilisateur

StarTech.com

StarTech.com S352BU33RER Manuel utilisateur

StarTech.com

StarTech.com S251BPU313 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur