StarTech.com USB100BT Manuel utilisateur

USB to 10/100 Mbps Ethernet Adapter

10/100 Mbps Network Adapter

Installation Manual

USB100BT

Overview

The StarTech.com USB to 10/100 Mbps Ethernet

adapter allows any PC running Windows 98 or 2000 to

connect to an Ethernet network. Its small size and

convenient USB connection allow it to be installed

without opening the computer, making it perfect for

notebook PCs or computers that have all their

expansion slots filled.

The USB100BT is perfect for connecting a notebook PC

to a network or connecting a PC with no available

IRQs on a network.

Features

• Autosenses 10 or 100 Mbps network speed

• Is installed without opening the computer

• Works with Windows 98/2000/ME

• LEDs indicate connection speed, link, and activity

• Supports full duplex ethernet connections

Specifications

USB Standards USB Specification 1.1

Ethernet Standards IEEE 802.3 and 802.3u

Connectors 1x RJ45 and 1x USB type B

LEDs 10/100 Mbps, Link/Activity

Driver Support Windows 98/2000/ME

Dimensions 3.15 x 1.8 x 0.83 inches

(80mm x 46mm x 21mm)

Weight 50g

Operating Temperature 0 - 50 degrees Celsius

Humidity 10 - 90% non-condensing

Certification FCC, CE Mark

Getting Started

This section is to help you prepare the USB100BT for

installation. Please read through this section carefully

before attempting to install the USB100BT.

Unpacking the USB100BT

1 x Ethernet adapter

1 x USB A-B cable

1 x Driver disk

Installation

Hardware Installation

1. Connect the RJ45 connector of the USB adapter to

the 10/100Mbps hub/switch of your LAN by using

a twisted-pair cable (maximum length 100 meters).

Use Category 3, 4 or 5 cable for 10Mbps Ethernet

and Category 5 cable for 100Mbps Fast Ethernet.

2. Connect the USB Type B connector is the USB

adapter and your PC’s or USB Hub’s USB Type A

connector by using the standard USB cable

(maximum length 5m).

Software Installation

The drivers and utilities are supplied on the diskette

included in this package.

Before you install the USB device driver, you must

first make sure that your computer’s USB controller

device has been properly detected and configured

under Windows. Also make sure that the USB port is

enabled. Check your computer’s user’s manual for

more information on how to use the USB port.

1. Start Windows 98/ME. Click “Start”, “Control

Panel”

and “System”.

2. Click “Device Manager” and browse the device list.

Check if the Universal Serial Bus controller device

is present.

Driver Installation

1. Connect the USB Ethernet adapter to the PC.

2. Connect the USB Ethernet adapter to your network’s

hub or switch.

3. The New Hardware Wizard will be displayed.

4. When prompted for the installation medium, check

Floppy Disk Drive and insert the software

driver diskette.

5. Follow the displayed instructions.

6. You will observe several loading status windows.

7. When prompted to restart the PC, remove the driver

diskette and click “Yes”.

Troubleshooting

If you experience any problems with this adapter, first

make sure the appropriate driver is loaded, the proper

cable is connected to the adapter and the hub complies

with the adapter specification; then check the LED.

This adapter provides two LEDs to indicate

network status.

(1) 10M/100M

This LED indicates the connection speed of the USB

Ethernet adapter. When the light is OFF, it indicates

that the 10Mbps UTP connection is established. When

the light is ON, it indicates that the 100Mbps Fast

Ethernet connection is established.

(2) Link/Activity

The Link/Activity LED indicates that the 10/100Mbps

UTP connection has been LINK OK or not. When the

light is OFF, it indicates that the 10/100Mbps port has

not been connected or LINK not OK. When the light is

ON, it indicates that the 10/100Mbps port connection

is OK. When the light is BLINKING, it indicates that

there is traffic flow on the network which the adapter

is connected to.

Table des matières

Autres manuels StarTech.com Adaptateur

StarTech.com

StarTech.com 8STCDP2VGASA Manuel utilisateur

StarTech.com

StarTech.com HD2DPVGADVI Manuel utilisateur

StarTech.com

StarTech.com USBAUDIO5CH Manuel utilisateur

StarTech.com

StarTech.com DKT30CHPD Manuel utilisateur

StarTech.com

StarTech.com DKT3CHSD4GPD Manuel utilisateur

StarTech.com

StarTech.com CF2USAT18E Manuel utilisateur

StarTech.com

StarTech.com USB32HD2 Manuel utilisateur

StarTech.com

StarTech.com USB32VGAV Manuel utilisateur

StarTech.com

StarTech.com ICUSB232PRO Manuel utilisateur

StarTech.com

StarTech.com WIFI2HDMC Manuel utilisateur

StarTech.com

StarTech.com USB2VGAPRO2 Manuel utilisateur

StarTech.com

StarTech.com USB2SATA25 Manuel utilisateur

StarTech.com

StarTech.com USB867WAC22 Manuel utilisateur

StarTech.com

StarTech.com USB2PS2 Manuel utilisateur

StarTech.com

StarTech.com DKT30CHVW Manuel utilisateur

StarTech.com

StarTech.com USB3SSATAIDE Manuel utilisateur

StarTech.com

StarTech.com DKT30CHCPD Manuel utilisateur

StarTech.com

StarTech.com USB2100S Manuel

StarTech.com

StarTech.com SAT2IDEADP Manuel utilisateur

StarTech.com

StarTech.com USB32HDE Manuel utilisateur

StarTech.com

StarTech.com MDP2HDMIUSBA Manuel utilisateur

StarTech.com

StarTech.com USB1100S Manuel

StarTech.com

StarTech.com COMP2VGATVGB Manuel

StarTech.com

StarTech.com DKT30CHVSDPD Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur