Stanley N128677 Manuel utilisateur

Portable

Air Compressor

Compresor de

Aire Portative

Compresseur

d’Air Portable

Instruction manual

Manuel d'instructions

Manual de'instrucciones

CATALOG NUMBER

N128677

DEFINITIONS: SAFETY GUIDELINES

The definitions below describe the level of severity for each signal word. Please read the

manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in

death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in

minor or moderate injury.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in

property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY BOSTITCH TOOL,

CALL US TOLL FREE AT: 1-800-262-2161

www.stanleytools.com

AVERTISSEMENTS :

2 - ENG

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and

understand. This information relates to protecting YOUR SAFETY and

PREVENTING EQUIPMENT PROBLEMS. To help you recognize this

information, we use the symbols below. Please read the manual and pay

attention to these symbols.

Indicates an immi-

nently hazardous situation which, if

not avoided, will result in death or

serious injury.

Indicates a potential-

ly hazardous situation which, if not

avoided, may result in minor or

moderate injury.

Indicates a potential-

ly hazardous situation which, if not

avoided, could result in death or serious

injury.

Indicates a practice not

related to personal injury which, if not

avoided, may result in property damage.

IMPORTANT SAFETY INSTRUCTIONS

This product contains chemicals known to the State of

California to cause cancer, and birth defects or other reproductive harm. Wash

hands after handling.

Some dust contains chemicals known to the State of

California to cause cancer, birth defects or other reproductive harm such as

asbestos and lead in lead based paint.

To reduce the risk of injury, read the instruction manual.

SAVE THESE INSTRUCTIONS

HAZARD

RISK OF EXPLOSION OR FIRE

WHAT CAN HAPPEN HOW TO PREVENT IT

• Itisnormalforelectrical

contacts within the motor

and pressure switch to spark.

• Alwaysoperatethecompressor

in a well ventilated area free

of combustible materials,

gasline, or solvent vapors.

• Ifelectricalsparksfrom

compressor come into

contact with flammable

vapors, they may ignite,

causing fire or explosion.

• Ifsprayingflammablematerials,

locate compressor at least 20' (6.1 m)

away from spray area. An additional

length of air hose may be required.

• Storeflammablemateralsinasecure

location away from compressor.

3 - ENG

• Restrictinganyofthecom-

pressor ventilation openings

will cause serious overheat-

ing and could cause fire.

• Neverplaceobjectsagainst

or on top of compressor.

• Operatecompressorinanopen

area at least 12 inches (30.5 cm)

away from any wall or obstruction

that would restrict the flow of fresh

air to the ventilation openings.

• Operatecompressorinaclean,

dry well ventilated area. Do

not operate unit in any con-

fined area. Store indoors.

• Unattendedoperationofthis

product could result in per-

sonal injury or property dam-

age. To reduce the risk of fire,

do not allow the compressor

to operate unattended.

• Alwaysremaininattendancewith

the product when it is operating.

• Alwaysturnoffandunplug

unit when not in use.

HAZARD

RISK TO BREATHING (ASPHYXIATION)

WHAT CAN HAPPEN HOW TO PREVENT IT

• Thecompressedairdirectly

from your compressor is not

safe for breathing. The air

stream may contain carbon

monoxide, toxic vapors,

or solid particles from the

air tank. Breathing these

contaminants can cause

serious injury or death.

• Neveruseairobtaineddirectly

from the compressor to supply

air for human consumption. The

compressor is not equipped with

suitable filters and in-line safety

equipment for human consumption.

• Exposuretochemicalsindust

created by power sanding,

sawing, grinding, drilling,

and other construction

activities may be harmful.

• Sprayedmaterialssuchas

paint, paint solvents, paint

remover, insecticides, weed

killers, may contain harmful

vapors and poisons.

• Workinanareawithgoodcross

ventilation. Read and follow the

safety instructions provided on the

label or safety data sheets for the

materials you are spraying. Always

use certified safety equipment:

NIOSH/OSHA respiratory protection

or properly fitting face mask designed

for use with your specific application.

4 - ENG

HAZARD

RISK OF BURSTING

Air Tank: On February 26, 2002, the U.S. Consumer Product Safety

Commission published Release # 02-108 concerning air compressor tank

safety:

Air compressor receiver tanks do not have an infinite life. Tank life is depen-

dent upon several factors, some of which include operating conditions,

ambient conditions, proper installations, field modifications, and the level

of maintenance. The exact effect of these factors on air receiver life is dif-

ficult to predict.

If proper maintenance procedures are not followed, internal corrosion to

the inner wall of the air receiver tank can cause the air tank to unexpectedly

rupture allowing pressurized air to suddenly and forcefully escape, posing

risk of injury to consumers.

Your compressor air tank must be removed from service by the end of the

year shown on your tank warning label.

The following conditions could lead to a weakening of the air tank, and

result in a violent air tank explosion:

WHAT CAN HAPPEN HOW TO PREVENT IT

• Failuretoproperlydrain

condensed water from

air tank, causing rust and

thinning of the steel air tank.

• Drainairtankdailyoraftereachuse.

If air tank develops a leak, replace

it immediately with a new air tank

or replace the entire compressor.

• Modificationsorattempted

repairs to the air tank. • Neverdrillinto,weld,ormake

any modifications to the air tank

or its attachments. Never attempt

to repair a damaged or leaking air

tank. Replace with a new air tank.

• Unauthorizedmodifications

to the safety valve or any

other components which

control air tank pressure.

• Theairtankisdesignedtowithstand

specific operating pressures.

Never make adjustments or

parts substitutions to alter the

factory set operating pressures.

Attachments & accessories:

• Exceedingthepressure

rating of air tools, spray

guns, air operated

accessories, tires, and other

inflatables can cause them

to explode or fly apart, and

could result in serious injury.

• Followtheequipmentmanufacturers

recommendation and never exceed

the maximum allowable pressure

rating of attachments. Never use

compressor to inflate small low

pressure objects such as children’s

toys, footballs, basketballs, etc.

5 - ENG

Tires:

• Overinflationoftirescould

result in serious injury

and property damage.

• Useatirepressuregaugetocheck

the tires pressure before each use

and while inflating tires; see the tire

sidewall for the correct tire pressure.

NOTE: Air tanks, compressors and

similar equipment used to inflate

tires can fill small tires very rapidly.

Adjust pressure regulator on air

supply to no more than the rating

of the tire pressure. Add air in small

increments and frequently use the

tire gauge to prevent over inflation.

HAZARD

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN HOW TO PREVENT IT

• Yourcompressorispowered

by electricity. Like any other

electrically powered device,

if it is not used properly it

may cause electric shock.

• Neveroperatethecompressor

outdoors when it is raining

or in wet conditions.

• Neveroperatecompressor

with protective covers

removed or damaged.

• Repairsattemptedby

unqualified personnel can

result in serious injury or

death by electrocution.

• Anyelectricalwiringorrepairs

required on this product should be

performed by authorized service

center personnel in accordance with

national and local electrical codes.

• Electrical Grounding:

Failure to provide adequate

grounding to this product

could result in serious injury

or death from electrocution.

Refer to Grounding

Instructions paragraph in

the Installation section.

• Makecertainthattheelectrical

circuit to which the compressor

is connected provides proper

electrical grounding, correct voltage

and adequate fuse protection.

HAZARD

RISK FROM FLYING OBJECTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• Thecompressedairstream

can cause soft tissue

damage to exposed skin

and can propel dirt, chips,

loose particles, and small

objects at high speed,

resulting in property

damage or personal injury.

• Alwayswearcertifiedsafety

equipment: ANSI Z87.1 eye protection

(CAN/CSA Z94.3) with side shields

when using the compressor.

• Neverpointanynozzleorsprayer

toward any part of the body or

at other people or animals.

• Alwaysturnthecompressor

off and bleed pressure from

the air hose and air tank before

attempting maintenance,

attaching tools or accessories.

6 - ENG

HAZARD

RISK OF HOT SURFACES

WHAT CAN HAPPEN HOW TO PREVENT IT

• Touchingexposedmetal

such as the compressor

head, engine head, engine

exhaust or outlet tubes, can

result in serious burns.

• Nevertouchanyexposedmetal

parts on compressor during or

immediately after operation.

Compressor will remain hot for

several minutes after operation.

• Donotreacharoundprotective

shrouds or attempt maintenance

until unit has been allowed to cool.

HAZARD

RISK FROM MOVING PARTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• Movingpartssuchasthe

pulley, flywheel, and belt

can cause serious injury

if they come into contact

with you or your clothing.

• Neveroperatethecompres-

sor with guards or covers which

are damaged or removed.

• Keepyourhair,clothing,and

gloves away from moving parts.

Loose clothes, jewelry, or long hair

can be caught in moving parts.

• Airventsmaycovermovingparts

and should be avoided as well.

• Attemptingtooperate

compressor with damaged or

missing parts or attempting

to repair compressor

with protective shrouds

removed can expose you

to moving parts and can

result in serious injury.

• Anyrepairsrequiredonthis

product should be performed by

authorized service center personnel.

HAZARD

RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN HOW TO PREVENT IT

• Unsafeoperationof

your compressor could

lead to serious injury or

death to you or others.

• Reviewandunderstandallinstruc-

tions and warnings in this manual.

• Becomefamiliarwiththeoperation

and controls of the air compressor.

• Keepoperatingareaclearofall

persons, pets, and obstacles.

• Keepchildrenawayfromthe

air compressor at all times.

7 - ENG

• Donotoperatetheproduct

when fatigued or under the

influence of alcohol or drugs.

Stay alert at all times.

• Neverdefeatthesafetyfea

tures of this product.

• Equipareaofoperation

with a fire extinguisher.

• Donotoperatemachinewithmiss-

ing, broken, or unauthorized parts.

• Neverstandonthecompressor.

HAZARD

RISK OF FALLING

WHAT CAN HAPPEN HOW TO PREVENT IT

• Aportablecompressorcan

fall from a table, workbench,

or roof causing damage to

the compressor and could

result in serious injury or

death to the operator.

• Alwaysoperatecompressorina

stable secure position to prevent

accidental movement of the unit.

Never operate compressor on a roof

or other elevated position. Use addi-

tional air hose to reach high

locations.

HAZARD

RISK FROM NOISE

WHAT CAN HAPPEN HOW TO PREVENT IT

• Undersomeconditions

and duration of use, noise

from this product may con-

tribute to hearing loss.

• Alwayswearcertifiedsafe-

ty equipment: ANSI S12.6

(S3.19) hearing protection.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

SPECIFICATIONS

Model No. STFP70635

Bore 1.86 inches (47.3 mm)

Stroke 1.26 inches (32 mm)

Voltage/Hz-Single Phase 120/60

Minimum Branch Circuit Requirement 15 amps

Fuse Type Time Delay

Air Tank Capacity (Gallon) 1.5 gallons (5.7 liters)

Approximate Cut-in Pressure 120 PSIG

Approximate Cut-out Pressure 150 PSIG

SCFM @ 40 psig 3.0*

SCFM @ 90 psig 2.0*

*Tested per ISO 1217

Refer to Glossary for abbreviations.

8 - ENG

GLOSSARY

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks:

UL®*, CUL, ETL®*, CETL, have been evaluated by OSHA certified inde-

pendent safety laboratories and meet the applicable Standards for Safety.

*UL®is a registered trademark of Underwriters Laboratories and ETL®is a

registered trademark of ElectricalTesting Laboratories.

Cut-In Pressure: Whilethemotorisoff,airtankpressuredropsasyoucontinue

touseyouraccessory.Whenthetankpressuredropstoacertainlowerlevel

the motor will restart automatically. The low pressure at which the motor auto-

matically restarts is called "cut-in" pressure.

Cut-Out Pressure:Whenanaircompressoristurnedonandbeginstorun,air

pressure in the air tank begins to build. It builds to a certain high pressure

before the motor automatically shuts off, protecting your air tank from pres-

sure higher than its capacity. The high pressure at which the motor shuts off

is called "cut-out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to

prolong the life of your air compressor, it is recommended that a 50%-75%

average duty cycle be maintained; that is, the air compressor pump should

not run more than 30-45 minutes in any given hour.

ACCESSORIES

Accessories for this unit are available at the store the unit was purchased.

The use of any other accessory not recommended for use with this tool

could be hazardous. Use only accessories rated equal to or higher than the rating of the air

compressor.

9 - ENG

ASSEMBLY

CONTENTS OF CARTON

Air Compressor (1)

Air Hose (1)

Female Tire Chuck (1)

InflatorAccessoryKit(1)

TOOLS REQUIRED FOR ASSEMBLY

1 - 9/16 inch open end wrench

1 - adjustable wrench

UNPACKING

Remove unit from carton and discard all packaging.

NOTE: Save all parts bags.

ASSEMBLE HOSE

Assemble hose to air outlet. Apply

tape to hex fitting. Tighten hose onto

hex fitting hand-tight, plus 1/4 –turn

with wrench, tighten to 15 inch-

pounds.

IMPORTANT: The hex fitting on the air

outlet MUST be held in place with a

wrench (Fig. 1) when tightening hose

onto air outlet.

ASSEMBLE ACCESSORIES

(FIG. 2)

To reduce the risk of

injury, turn unit off and disconnect it

from power source before installing and

removing accessories, before adjusting or

when making repairs. An accidental start-

up can cause injury.

Choose the accessory needed.

NOTE: Apply thread seal tape to

threads of exposed fittings.

Assemble Female Tire Chuck

Assemble female tire chuck to hose

and tighten securely with wrenches.

Assemble Other Accessories

1. Attach the hose adapter to hose.

2. Choose the needed accessory.

Attach the tapered nozzles, nee-

dle or high flow inflator/deflator adapter body to the hose adapter.

Female

Tire Chuck Industrial Plug

Industrial

Plug

Industrial

Plug

Universal

Coupler

Hose

Adapter

Hose

End

Tapered

Nozzles

Safety Tip

Blow Gun

Adapter Blow Gun

Inflation

Needle

High Flow Inflator/defla-

tor Adapter Body with

nozzles

10 - ENG

INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

• Locatetheaircompressorinaclean,dryandwellventilatedarea.

• Theaircompressorshouldbelocatedatleast12inches(30.5cm)away

from the wall or other obstructions that will interfere with the flow of air.

• Theaircompressorpumpandshroudaredesignedtoallowforproper

cooling. The ventilation openings on the compressor are necessary to

maintain proper operating temperature. Do not place rags or other con-

tainers on or near these openings.

GROUNDING INSTRUCTIONS

Risk of Electrical Shock. In the event of a short circuit, grounding reduces

the risk of shock by providing an escape wire for the electric current. This air compressor

must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire

with an appropriate grounding plug (see following illustrations).

1. The cord set and plug with this unit contains a grounding pin. This plug

MUST be used with a grounded outlet.

IMPORTANT: The outlet being used must be installed and grounded in accor-

dance with all local codes and ordi-

nances.

2. Make sure the outlet being used

has the same configuration as

the grounded plug. DO NOT USE AN

ADAPTER. See Fig. 3.

3. Inspect the plug and cord before

each use. Do not use if there are

signs of damage.

4. If these grounding instructions are not completely understood, or if in

doubt as to whether the compressor is properly grounded, have the

installation checked by a qualified electrician.

RISK OF ELECTRICAL SHOCK. IMPROPER GROUNDING CAN

RESULT IN ELECTRICAL SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should

be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

EXTENSION CORDS

If an extension cord must be used, be sure it is:

• a3wireextensioncordthathasa3bladegroundingplug,anda3slot

receptacle that will accept the plug on the product

• ingoodcondition

• nolongerthan50feet(15,2m)

• 16 gauge (AWG) or heavier. (Wire size increases as gauge number

decreases.14,12,10and8AWGmayalsobeused.DONOTUSE18AWG.)

The use of an undersized extension cord will cause voltage to drop

resulting in power loss to the motor and overheating. Instead of using an extension cord,

increase the working reach of the air hose by attaching another length of hose to its end.

Attach additional lengths of hose as needed.

Grounding Pin

Grounded

Outlets

Plug 3

Table des matières

Langues :

Autres manuels Stanley Compresseur d'air

Stanley

Stanley D 210/8/6 Manuel utilisateur

Stanley

Stanley D 200/10/24V Manuel utilisateur

Stanley

Stanley HRC120DS Manuel utilisateur

Stanley

Stanley D 210/8/6 Manuel utilisateur

Stanley

Stanley DN 200/10/30V Manuel utilisateur

Stanley

Stanley BA 550/11/200 Manuel utilisateur

Stanley

Stanley 8216035SCR011 Manuel utilisateur

Stanley

Stanley DN 200-10-5 Manuel utilisateur

Stanley

Stanley STFP70635 Manuel utilisateur

Stanley

Stanley SXAC2550222 Manuel utilisateur

Stanley

Stanley SXAC2036121 Manuel utilisateur

Stanley

Stanley SXCMD15WE Manuel utilisateur

Stanley

Stanley SXAC1521121 Manuel utilisateur

Stanley

Stanley FATMAX FMXCMS156HE Manuel utilisateur

Stanley

Stanley AIR KIT Manuel utilisateur

Stanley

Stanley STFP00020 Manuel utilisateur

Stanley

Stanley FATMAX FMFP70979 Manuel utilisateur

Stanley

Stanley SXCM27550323 Manuel utilisateur

Stanley

Stanley FATMAX FMXCMD152WE Manuel utilisateur

Stanley

Stanley A6BB304SCR512 Manuel utilisateur

Stanley

Stanley STC24 Manuel utilisateur

Stanley

Stanley WD210/8/24 Manuel utilisateur

Stanley

Stanley AIRPRO 120 CDC120SCA Manuel utilisateur

Stanley

Stanley SXCMS1350VE Silent Manuel utilisateur

Manuels Compresseur d'air populaires d'autres marques

Sparmax

Sparmax DC-25XR Manuel utilisateur

KAESER

KAESER M122 Manuel utilisateur

GMC

GMC GAC1500 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton Air Compressor Manuel utilisateur

Fini

Fini F3GST2TK Manuel utilisateur

Industrial Air

Industrial Air CP1580325 Manuel de programmation

Campbell Hausfeld

Campbell Hausfeld RP3300 Guide de démarrage rapide

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuel utilisateur

Hitachi

Hitachi EC99S Manuel de l'opérateur

Parkside

Parkside PKO 270 A1 Manuel utilisateur

Sullair

Sullair 185 Manuel utilisateur

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuel utilisateur

Ferm

Ferm CRM1046 Manuel utilisateur

BE AC153 Manuel utilisateur

RIDGID

RIDGID OF25150A Manuel utilisateur

Johnson Controls

Johnson Controls QUANTUM LX Manuel

Sears

Sears Craftsman 919.167463 Manuel utilisateur

Ring Automotive

Ring Automotive RAC700 Manuel utilisateur