Stanley STFP00020 Manuel utilisateur

Instruction manual

Manuel d'instructions

Manual de'instrucciones

www.StanleyTools.com

INSTRUCTIVO DE OPERACIÓN, CENTROS

DE SERVICIO Y PÓLIZA DE GARANTÍA.

LÉASE ESTE INSTRUCTIVO

ANTES DE USAR EL PRODUCTO.

STFP00020

Air Compressor

Compresor de aire

Compresseur d’air

Maintenance-free pump

La pompe sans entretien

La bomba sin mantenimiento

Final size: 210mm x 145mm

2 - ENG

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and understand. This information

relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize

this information, we use the symbols below. Please read the manual and pay attention to these symbols.

Indicates an imminently

hazardous situation which, if not avoided, will

result in death or serious injury.

Indicates a potentially

hazardous situation which, if not avoided, may

result in minor or moderate injury.

Indicates a potentially

hazardous situation which, if not avoided, could

result in death or serious injury.

Indicates a practice not

related to personal injury which, if not

avoided, may result in property damage.

IMPORTANT SAFETY INSTRUCTIONS

This product contains chemicals known to the State of California to cause cancer,

and birth defects or other reproductive harm. Wash hands after handling.

Some dust contains chemicals known to the State of California to cause cancer,

birth defects or other reproductive harm such as asbestos and lead in lead based paint.

To reduce the risk of injury, read the instruction manual.

SAVE THESE INSTRUCTIONS

HAZARD

RISK OF EXPLOSION OR FIRE

WHAT CAN HAPPEN HOW TO PREVENT IT

• It is normal for electrical contacts within the

motor and pressure switch to spark. • Always operate the compressor in a well

ventilated area free of combustible materials,

gasoline, or solvent vapors.

• If electrical sparks from compressor come into

contact with flammable vapors, they may ignite,

causing fire or explosion.

• If spraying flammable materials, locate

compressor at least 20' (6.1 m) away from

spray area.An additional length of air hose may

be required.

• Store flammable materials in a secure location

away from compressor.

• Restricting any of the compressor ventilation

openings will cause serious overheating and

could cause fire.

• Never place objects against or on top of

compressor.

• Operate compressor in an open area at least 12"

(30.5 cm) away from any wall or obstruction

that would restrict the flow of fresh air to the

ventilation openings.

• Operate compressor in a clean, dry well

ventilated area. Do not operate unit in any

confined area. Store indoors.

• Unattended operation of this product could

result in personal injury or property damage.

To reduce the risk of fire, do not allow the

compressor to operate unattended.

• Always remain in attendance with the product

when it is operating.

• Always turn off and unplug unit when not in

use.

3 - ENG

HAZARD

RISK TO BREATHING (ASPHYXIATION)

WHAT CAN HAPPEN HOW TO PREVENT IT

• The compressed air directly from your

compressor is not safe for breathing. The air

stream may contain carbon monoxide, toxic

vapors, or solid particles from the air tank.

Breathing these contaminants can cause serious

injury or death.

• Never use air obtained directly from

the compressor to supply air for human

consumption. The compressor is not equipped

with suitable filters and in-line safety equipment

for human consumption.

• Exposure to chemicals in dust created by power

sanding, sawing, grinding, drilling, and other

construction activities may be harmful.

• Sprayed materials such as paint, paint solvents,

paint remover, insecticides, weed killers, may

contain harmful vapors and poisons.

• Work in an area with good cross ventilation.

Read and follow the safety instructions

provided on the label or safety data sheets

for the materials you are spraying. Always

use certified safety equipment: NIOSH/OSHA

respiratory protection or properly fitting face

mask designed for use with your specific

application.

HAZARD

RISK OF BURSTING

Air Tank: On February 26, 2002, the U.S. Consumer Product Safety Commission published

Release # 02-108 concerning air compressor tank safety:

Air compressor receiver tanks do not have an infinite life. Tank life is dependent upon several

factors, some of which include operating conditions, ambient conditions, proper installations, field

modifications, and the level of maintenance. The exact effect of these factors on air receiver life is

difficult to predict.

If proper maintenance procedures are not followed, internal corrosion to the inner wall of the air

receiver tank can cause the air tank to unexpectedly rupture allowing pressurized air to suddenly and

forcefully escape, posing risk of injury to consumers.

Your compressor air tank must be removed from service by the end of the year shown on your tank

warning label.

The following conditions could lead to a weakening of the air tank, and result in a violent air tank

explosion:

WHAT CAN HAPPEN HOW TO PREVENT IT

• Failure to properly drain condensed water from

air tank, causing rust and thinning of the steel

air tank.

• Drain air tank daily or after each use. If air tank

develops a leak, replace it immediately with a

new air tank or replace the entire compressor.

• Modifications or attempted repairs to the

air tank. • Never drill into, weld, or make any modifications

to the air tank or its attachments. Never attempt

to repair a damaged or leaking air tank. Replace

with a new air tank.

• Unauthorized modifications to the safety valve

or any other components which control air tank

pressure.

• The air tank is designed to withstand specific

operating pressures. Never make adjustments

or parts substitutions to alter the factory set

operating pressures.

4 - ENG

ATTACHMENTS & ACCESSORIES:

• Exceeding the pressure rating of air tools, spray

guns, air operated accessories, tires, and other

inflatables can cause them to explode or fly

apart, and could result in serious injury.

• Follow the equipment manufacturers

recommendation and never exceed the

maximum allowable pressure rating of

attachments. Never use compressor to inflate

small low pressure objects such as children’s

toys, footballs, basketballs, etc.

TIRES:

• Over inflation of tires could result in serious

injury and property damage. • Use a tire pressure gauge to check the tires

pressure before each use and while inflating

tires; see the tire sidewall for the correct tire

pressure.

NOTE: Air tanks, compressors and similar

equipment used to inflate tires can fill small

tires very rapidly. Adjust pressure regulator on

air supply to no more than the rating of the

tire pressure. Add air in small increments and

frequently use the tire gauge to prevent over

inflation.

HAZARD

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN HOW TO PREVENT IT

• Your compressor is powered by electricity. Like

any other electrically powered device, if it is not

used properly it may cause electric shock.

• Never operate the compressor outdoors when it

is raining or in wet conditions.

• Never operate compressor with protective

covers removed or damaged.

• Repairs attempted by unqualified personnel can

result in serious injury or death by electrocution. • Any electrical wiring or repairs required on this

product should be performed by authorized

service center personnel in accordance with

national and local electrical codes.

• Electrical Grounding: Failure to provide

adequate grounding to this product could result

in serious injury or death from electrocution.

Refer to Grounding Instructions paragraph in

the Installation section.

• Make certain that the electrical circuit to

which the compressor is connected provides

proper electrical grounding, correct voltage and

adequate fuse protection.

HAZARD

RISK FROM FLYING OBJECTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• The compressed air stream can cause soft tissue

damage to exposed skin and can propel dirt,

chips, loose particles, and small objects at high

speed, resulting in property damage or personal

injury.

• Always wear certified safety equipment: ANSI

Z87.1 eye protection (CAN/CSA Z94.3) with side

shields when using the compressor.

• Never point any nozzle or sprayer toward any

part of the body or at other people or animals.

• Always turn the compressor off and bleed

pressure from the air hose and air tank before

attempting maintenance, attaching tools or

accessories.

5 - ENG

HAZARD

RISK OF HOT SURFACES

WHAT CAN HAPPEN HOW TO PREVENT IT

• Touching exposed metal such as the compressor

head, engine head, engine exhaust or outlet

tubes, can result in serious burns.

• Never touch any exposed metal parts on

compressor during or immediately after

operation. Compressor will remain hot for

several minutes after operation.

• Do not reach around protective shrouds or

attempt maintenance until unit has been

allowed to cool.

HAZARD

RISK FROM MOVING PARTS

WHAT CAN HAPPEN HOW TO PREVENT IT

• Moving parts such as the pulley, flywheel, and

belt can cause serious injury if they come into

contact with you or your clothing.

• Never operate the compressor with guards or

covers which are damaged or removed.

• Keep your hair, clothing, and gloves away from

moving parts. Loose clothes, jewelry, or long

hair can be caught in moving parts.

• Air vents may cover moving parts and should be

avoided as well.

• Attempting to operate compressor with

damaged or missing parts or attempting to

repair compressor with protective shrouds

removed can expose you to moving parts and

can result in serious injury.

• Any repairs required on this product should

be performed by authorized service center

personnel.

HAZARD

RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN HOW TO PREVENT IT

• Unsafe operation of your compressor could lead

to serious injury or death to you or others. • Review and understand all instructions and

warnings in this manual.

• Become familiar with the operation and controls

of the air compressor.

• Keep operating area clear of all persons, pets,

and obstacles.

• Keep children away from the air compressor at

all times.

• Do not operate the product when fatigued or

under the influence of alcohol or drugs. Stay

alert at all times.

• Never defeat the safety features of this product.

• Equip area of operation with a fire extinguisher.

• Do not operate machine with missing, broken,

or unauthorized parts.

• Never stand on the compressor.

6 - ENG

HAZARD

RISK OF FALLING

WHAT CAN HAPPEN HOW TO PREVENT IT

• A portable compressor can fall from a table,

workbench, or roof causing damage to the

compressor and could result in serious injury or

death to the operator.

• Always operate compressor in a stable secure

position to prevent accidental movement of the

unit. Never operate compressor on a roof or

other elevated position. Use additional air hose

to reach high locations.

HAZARD

RISK FROM NOISE

WHAT CAN HAPPEN HOW TO PREVENT IT

• Under some conditions and duration of use,

noise from this product may contribute to

hearing loss.

• Always wear proper hearing protection during

use.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

SPECIFICATIONS

Model No. STFP00020

Bore 1.181" (30 mm)

Stroke 0.551" (14 mm)

Voltage/Hz-Single Phase 120/60

Minimum Branch Circuit Requirement 15 amps

Fuse Type Time Delay

Air Tank Capacity 2 Gallon (7.5 liters)

Approximate Cut-in Pressure 85 psig

Approximate Cut-out Pressure 115 psig

SCFM @ 40 psig 0.7 *

SCFM @ 90 psig 0.5 *

Regulated Pressure Rating (Approximate) 3–115 psig

Quick Connect Type 1/4" (6.4 mm) Industrial

*Tested per ISO 1217

Refer to Glossary for abbreviations.

GLOSSARY

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL®, CUL, CULUS, ETL®,

CETL, CETLUS, have been evaluated by OSHA certified independent safety laboratories and meet the

applicable Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to use your accessory. When

the tank pressure drops to a certain lower level the motor will restart automatically.The low pressure at which

the motor automatically restarts is called "cut-in" pressure.

7 - ENG

Cut-Out Pressure: When an air compressor is turned on and begins to run, air pressure in the air tank

begins to build. It builds to a certain high pressure before the motor automatically shuts off, protecting

your air tank from pressure higher than its capacity. The high pressure at which the motor shuts off is called

"cut-out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to prolong the life of your air

compressor, it is recommended that a 50%-75% average duty cycle be maintained; that is, the air

compressor pump should not run more than 30-45 minutes in any given hour.

ASSEMBLY

UNPACKING

Remove unit from carton and discard all packaging.

INSTALLATION

HOW TO SET UP YOUR UNIT

LOCATION OF THE AIR COMPRESSOR

• Locate the air compressor in a clean, dry and well ventilated area.

• The air compressor should be located at least 12" (30.5 cm) away from the wall or other obstructions

that will interfere with the flow of air.

• The air compressor pump and shroud are designed to allow for proper cooling. The ventilation

openings on the compressor are necessary to maintain proper operating temperature. Do not place

rags or other containers on or near these openings.

GROUNDING INSTRUCTIONS (FIG. 1)

RISK OF ELECTRICAL SHOCK. In the event of a short circuit, grounding

reduces the risk of shock by providing an escape wire for the electric current. This air

compressor must be properly grounded.

The portable air compressor is equipped with a cord

FIG. 1

having a grounding wire with an appropriate grounding

plug (A).

1. The cord set and plug (A) with this unit contains a

grounding pin (B). This plug MUST be used with a

grounded outlet (C).

IMPORTANT: The outlet being used must be installed

and grounded in accordance with all local codes and

ordinances.

2. Make sure the outlet being used has the same

configuration as the grounded plug. DO NOT USE AN ADAPTER. See figure 1.

3. Inspect the plug and cord before each use. Do not use if there are signs of damage.

4. If these grounding instructions are not completely understood, or if in doubt as to whether the

compressor is properly grounded, have the installation checked by a qualified electrician.

RISK OF ELECTRICAL SHOCK. IMPROPER GROUNDING CAN RESULT IN

ELECTRICAL SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should

be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

8 - ENG

EXTENSION CORDS

If an extension cord must be used, be sure it is:

• a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will accept

the plug on the product

• in good condition

• no longer than 50' (15.2 m)

• 14 gauge (AWG) or larger. (Wire size increases as gauge number decreases. 12 AWG and 10AWG

may also be used. DO NOT USE 16 OR 18 AWG.)

Risk of Property Damage. The use of an undersized extension cord will cause

voltage to drop resulting in power loss to the motor and overheating. Instead of using an

extension cord, increase the working reach of the air hose by attaching another length of hose to its end.

Attach additional lengths of hose as needed.

VOLTAGE AND CIRCUIT PROTECTION

Refer to Specifications for the voltage and minimum branch circuit requirements.

Risk of Overheating. Certain air compressors can be operated on a 15 amp circuit if

the following conditions are met.

1. Voltage supply to circuit must comply with the National Electrical Code.

2. Circuit is not used to supply any other electrical needs.

3. Extension cords comply with specifications.

4. Circuit is equipped with a 15 amp circuit breaker or 15 amp time delay fuse.

NOTE: If compressor is connected to a circuit protected by fuses, use only time delay fuses. Time

delay fuses should be marked "D" in Canada and "T" in the US.

If any of the above conditions cannot be met, or if operation of the compressor repeatedly causes

interruption of the power, it may be necessary to operate it from a 20 amp circuit. It is not necessary to

change the cord set.

OPERATION

KNOW YOUR AIR COMPRESSOR

READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the

illustrations with your unit to familiarize yourself with the location of various controls and adjustments.

Save this manual for future reference.

DESCRIPTION OF OPERATION (FIG. 2–4)

FIG. 2 D

9 - ENG

Become familiar with these controls before operating the unit.

On(I)/Off(O) Switch (D): Place this switch in the On (I) position to provide automatic power to the

pressure switch and Off (O) to remove power at the end of each use.

Pressure Switch (not shown): The pressure switch automatically starts the motor when the air tank

pressure drops below the factory set "cut-in" pressure. It stops the motor when the air tank pressure

reaches the factory set "cut-out" pressure.

Safety Valve (H): If the pressure switch does not shut off the air compressor at its "cut-out" pressure

setting, the safety valve will protect against high pressure by "popping out" at its factory set pressure

(slightly higher than the pressure switch "cut-out" setting).

Tank Pressure Gauge (I): The tank pressure gauge indicates the reserve air pressure in the tank.

Outlet Pressure Gauge (E): The outlet pressure gauge indicates the air pressure available at the outlet

side of the regulator. This pressure is controlled by the regulator and is always less than or equal to the

tank pressure.

Regulator (G): Controls the air pressure shown on the outlet pressure gauge. Turn regulator knob

clockwise to increase pressure and counterclockwise to decrease pressure.

Cooling System (not shown): This compressor contains an advanced design cooling system. At the

heart of this cooling system is an engineered fan. It is perfectly normal for this fan to blow air through

the vent holes in large amounts. You know that the cooling system is working when air is being expelled.

Air Compressor Pump (not shown):Compresses air into the air tank.Working air is not available until

the compressor has raised the air tank pressure above that required at the air outlet.

Drain Valve (K): The drain valve is located at the base of the air tank and is used to drain condensation

at the end of each use.

FIG. 3 FIG. 4

Check Valve (not shown): When the air compressor is operating, the check valve is "open", allowing

compressed air to enter the air tank.When the air compressor reaches "cut-out" pressure, the check valve

"closes", allowing air pressure to remain inside the air tank.

Motor Overload Protector (not shown): The motor has a thermal overload protector. If the motor

overheats for any reason, the overload protector will shut off the motor. The motor must be allowed to

cool down before restarting. To restart:

1. Set the On/Off switch to "Off" and unplug unit.

2. Allow the motor to cool.

3. Plug the power cord into the correct branch circuit receptacle.

4. Set the Auto/Off switch to "On" position.

Motor Fuse Protector (not shown): The motor is provided with a fuse protector which may cause the

motor to shut off if motor current is too high. If the motor does not operate, follow the instructions under

Motor Overload Protector. If the motor fails to restart after following these instructions, return the unit

to a service center to have the fuse protector replaced. The fuse protector is not a customer serviceable

part.

Quick-Connect Body (F): The quick connect body accepts industrial quick connect plugs.

HOW TO USE YOUR UNIT (FIG. 2)

HOW TO STOP

1. Set the On/Off switch (D) to "Off".

2. Unplug unit when not in use.

10 - ENG

BEFORE STARTING

Do not operate this unit until you read this instruction manual for safety,

operation and maintenance instructions.

BEFORE EACH START-UP

1. Set the On/Off switch (D) to "Off".

Plug the power cord into the correct branch circuit receptacle.

(Refer to Voltage and Circuit

Protection paragraph in the Installation section of this manual.)

3. Turn the regulator knob (G) counterclockwise to set the outlet pressure to zero.

4. Attach hose and accessories.

Risk of unsafe operation. Firmly grasp air hose in hand when installing or

disconnecting to prevent hose whip.

Risk of unsafe operation. Do not use damaged or worn accessories.

NOTE: The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick

connect body (F).

Risk of Bursting. Too much air pressure causes a hazardous risk of bursting.

Check the manufacturer’s maximum pressure rating for air tools and accessories. The regulator

outlet pressure must never exceed the maximum pressure rating.

Risk of property damage.Compressed air from the unit may contain water condensation

and oil mist. Do not spray unfiltered air at an item that could be damaged by moisture. Some air tools and

accessories may require filtered air. Read the instructions for the air tools and accessories.

HOW TO START

1. Set the On/Off switch (D) to "On" and allow tank pressure to build. Motor will stop when tank

pressure reaches "cut-out" pressure.

2. Turn regulator knob (G) clockwise to increase pressure and stop when desired pressure is reached.

Risk of unsafe operation. If any unusual noise or vibration is noticed, stop the

compressor immediately and have it checked by a trained service technician.

The compressor is ready for use.

MAINTENANCE

CUSTOMER RESPONSIBILITIES

Before each use Daily or after

each use See tank warning label

Check Safety Valve X

Drain Tank X

Remove tank

from service X1

1- For more information,

call our Customer Care Center at 1-800-262-2161

Risk of unsafe operation. Unit cycles automatically when power is on. When

performing maintenance, you may be exposed to voltage sources, compressed air, or moving

parts. Personal injuries can occur. Before performing any maintenance or repair, disconnect

power source from the compressor and bleed off all air pressure.

NOTE: See Operation section for the location of controls.

TO CHECK SAFETY VALVE (FIG. 2)

Risk of Bursting. If the safety valve does not work properly, over-pressurization

may occur, causing air tank rupture or an explosion.

Table des matières

Langues :

Autres manuels Stanley Compresseur d'air

Stanley

Stanley AC6359 Manuel utilisateur

Stanley

Stanley AC6511 Manuel utilisateur

Stanley

Stanley FATMAX FMXCMD152WE Manuel utilisateur

Stanley

Stanley AC6168 Manuel utilisateur

Stanley

Stanley FatMax FMFP12829 Manuel utilisateur

Stanley

Stanley 8216035SCR011 Manuel utilisateur

Stanley

Stanley FATMAX FMFP70979 Manuel utilisateur

Stanley

Stanley AIR KIT Manuel utilisateur

Stanley

Stanley 8216035SCR011 Manuel utilisateur

Stanley

Stanley 79-004 Manuel de l'opérateur

Stanley

Stanley D 210/8/6 Manuel utilisateur

Stanley

Stanley DN55/8/5 Manuel utilisateur

Stanley

Stanley B 255/10/50 Manuel utilisateur

Stanley

Stanley Fatmax FMXCMS2020TE Manuel utilisateur

Stanley

Stanley DN 200-10-5 Manuel utilisateur

Stanley

Stanley D 210/8/24 Manuel utilisateur

Stanley

Stanley SXAC2550121 Manuel utilisateur

Stanley

Stanley D 200/8/6 Manuel utilisateur

Stanley

Stanley DN 200/10/30V Manuel utilisateur

Stanley

Stanley J7CS Manuel utilisateur

Stanley

Stanley D 210/8/24S Manuel utilisateur

Stanley

Stanley HY 227/10/5 Manuel utilisateur

Stanley

Stanley BA 550/11/200 Manuel utilisateur

Stanley

Stanley D 200/10/24V Manuel utilisateur

Manuels Compresseur d'air populaires d'autres marques

Sparmax

Sparmax DC-25XR Manuel utilisateur

KAESER

KAESER M122 Manuel utilisateur

GMC

GMC GAC1500 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton Air Compressor Manuel utilisateur

Fini

Fini F3GST2TK Manuel utilisateur

Industrial Air

Industrial Air CP1580325 Manuel de programmation

Campbell Hausfeld

Campbell Hausfeld RP3300 Guide de démarrage rapide

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuel utilisateur

Hitachi

Hitachi EC99S Manuel de l'opérateur

Parkside

Parkside PKO 270 A1 Manuel utilisateur

Sullair

Sullair 185 Manuel utilisateur

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuel utilisateur

Ferm

Ferm CRM1046 Manuel utilisateur

BE AC153 Manuel utilisateur

RIDGID

RIDGID OF25150A Manuel utilisateur

Johnson Controls

Johnson Controls QUANTUM LX Manuel

Sears

Sears Craftsman 919.167463 Manuel utilisateur

Ring Automotive

Ring Automotive RAC700 Manuel utilisateur