Stack-On SHD-SU-BG-B Manuel utilisateur

Serial # :

WARNING

Tip Over Hazard

A child or adult can p the safe and be

killed or seriously injured.

Failure to secure the safe as shown in

these instrucons can result in death or

serious injury to children and adults.

Children should not play with or

around the safe at any me.

40717-1704 116

NOTE: You can store your Key # and Serial # on

Stack-On’s SECURE website stackon.com under

Customer Service. Storing your Key # will provide

instant access to this important informaon should

you ever lose your keys.

Only you will have access to this informaon.

SHD-SU-BG-B INSTRUCTIONS

Drill

5/16” Drill Bit

7/16” Drill Bit

3/8” Drill Bit

17mm Socket Wrench

Phillips Screwdriver.

(2) Lag screws

(2) Washers

(2) Plasc Anchors

HARDWARE INCLUDED:

TOOLS REQUIRED:

Baery Disposal

Please dispose the

used baeries

per municipal or

provincial law.

IMPORTANT:

• Record the serial number from the tag on

the back of the safe or from the tag on the

front boom corner of the safe.

• Keep keys in a secure place away from

children.

• Do not store the back up key, or this

document in the safe.

• Do not move this safe using its handle. The

handle should only be used for opening and

closing the door of the safe.

• Do not store electronic media, computer

disks, audio-visual media or photographic

negaves in this safe. This material will not

survive the rated internal temperature of the

safe. This material may be damaged or

destroyed.

• Warning: Keep your safe closed and locked

at all mes when not in use. Children could

accidentally be locked inside the safe.

40717-1704 216

BATTERY INSTALLATION

TAB

You must ﬁrst install the baeries which are

located in the front protecve Styrofoam.

This safe uses 4 - AAA baeries. Under normal

use, baeries will last about 1 year.

NOTE: Do not mix old and new baeries.

Do not mix alkaline, standard or

rechargeable baeries.

NOTE: When changing or installing the

baeries, do not pull on the wires. Doing

this could cause the power supply to become

disconnected from the lock.

NOTE: If the baeries are low, the green and

red indicator lights will ﬂash together when

you start scanning. Replace with 4 new AAA

alkaline baeries.

To replace the baeries, remove the lock

faceplate by pressing the tab and turning the

cover as shown in the illustraon below.

Batteries

BACK VIEW

Battery cover

Open the baery compartment located on the

back of the lock faceplate as shown below.

Aer baeries are installed, reaach the

faceplate by twisng it on in the opposite

direcon of the illustraon on previous page.

NOTE: In certain dry climate condions, your

ﬁngerprint may not scan. If your ﬁngerprint did not

scan, we recommend moisturizing with minimal

loon and trying again.

40717-1704 316

RECORDING FINGERPRINTS

NOTE: The red reset buon located on the

inside of the door, is covered with a remov-

able red cap. When you use the red reset

buon while seng your own combinaon,

remove the cap to access the buon.

Replace the cap securely over the reset

buon aer seng your combinaon.

Failure to do so will compromise the safety

and security of the safe.

To record a ﬁngerprint, ﬁrst press the Reset Buon

on the inside of the safe. The scanner will turn blue

with two beeps (if the sound is turned on) and the

green light ﬂashes twice, you will then record the

same ﬁnger three mes as follows:

1. Place your ﬁnger on the scanner unl there

is one beep (if the sound is turned on) and the

green light ﬂashes once. Li your ﬁnger oﬀ

the scanner.

2. Place the same ﬁnger on the scanner for a

second me, holding the ﬁnger in the same

posion unl there is one beep (if the sound is

turned on) and the green light ﬂashes once. Li

your ﬁnger oﬀ the scanner.

3. Place the same ﬁnger on the scanner for a

third me, holding the ﬁnger in the same posion

unl there are two beeps (if the sound is turned

on) and the green light ﬂashes twice.

Li your ﬁnger oﬀ the scanner. Your ﬁngerprint is

now recorded.

SCAN THE SAME FINGER 3X

If the red light ﬂashes three mes with three beeps

(if the sound is turned on) your ﬁngerprint did not

get recorded and you will have to start over.

If you enter more than 20 ﬁngerprints, the red light

will ﬂash 5 mes and there will be 5 beeps

(if the sound is turned on).

When you ﬁrst receive your safe there are no

recorded ﬁngerprints. Any ﬁngerprint will open the

safe unl a ﬁngerprint is recorded. For security you

must record a ﬁngerprint. Failure to do so will

compromise the safety and security of the safe. You

can record up to 20 diﬀerent ﬁngerprints for opening

the safe. For best results, each individual should use

their thumb or index ﬁnger only.

Open the safe by turning the handle

counterclockwise and pull the door open.

OPENING THE SAFE

40717-1704 416

OPENING THE SAFE USING YOUR

FINGERPRINT

To acvate the scanner, touch the scanner or face

plate anywhere with a recorded ﬁnger - the green

light ﬂashes once with one beep (if the sound is

turned on). The blue light will come on, now scan

the recorded ﬁngerprint.

If the green light ﬂashes twice with 2 beeps (if the

sound is turned on), the scan has been accepted

and you will have 5 seconds to turn the handle to

open the door.

If the red light ﬂashes once, the scanner did not

read your ﬁngerprint and you must try again. If the

red light ﬂashes 3 mes, the scanner read your

ﬁngerprint and did not accept it.

If there are 3 rejected scans, where your

ﬁngerprint was read, and the red light ﬂashes 5

mes with 5 beeps (if the sound is turned on),

you will have an automac lockout for 60

seconds before you can try a scan again. The

safe will beep one me (if the sound is turned

on) and the green light will ﬂash once when the

lockout period is over.

If there is 1 more rejected scan where your

ﬁngerprint was read and the red light ﬂashes 5 mes

with 5 beeps (if the sound is turned on), you will

have an automac lockout for 5 minutes before you

can try a scan again. The safe will beep one me (if

the sound is turned on) and the green light will ﬂash

once when the lockout period is over.

LOCKING THE SAFE

To lock the safe, close the

door and rotate the handle

clockwise unl it stops. If the

handle is not turned unl it

stops, the locking mechanism

will not lock.

TURNING THE SOUND OFF/ON

Your safe comes with the beep sound turned on.

To turn the sound oﬀ, press the scanner with a

recorded ﬁngerprint for 10 seconds unl the

green light ﬂashes twice.

To turn the sound on, press the scanner with a

recorded ﬁngerprint unl you hear two beeps and

the green light ﬂashes twice.

CLEARING THE MEMORY

To clear the memory of all recorded

ﬁngerprints, locate the reset buon on the

inside of the safe and press this buon for

about 5 seconds unl the green light ﬂashes 10

mes with 10 beeps (if the sound is turned on).

All recorded scans will be erased.

NOTE: For security you must record a

ﬁngerprint. Failure to do so will compromise

the safety and security of the safe.

SELECTING A LOCATION

The safe must be mounted to the ﬂoor. For

opmal safety and security, the safe should

be installed adjacent to a side wall with

minimal space on either side of the safe, in an

isolated, dry and secure area.

The safe should be ﬂat against the wall and

ﬂoor. Remove the baseboard if necessary.

CHILDREN SHOULD NOT PLAY WITH OR

AROUND THE SAFE AT ANY TIME.

NOTE ON LOCKING THE SAFE:

Because the locking mechanism is deacvated

for approximately 3 to 6 seconds aer the

ﬁngerprint is entered, wait a minimum of

6 seconds from the me the scan is entered to

lock the safe.

40717-1704 516

SECURING THE SAFE

Mark the holes to be used. Drill the appropriate

diameter and depth of pilot holes depending on the

type of hardware being used and the type of

mounng surface.

Secure the safe with the fasteners.

NOTE: The safe must be secured to the ﬂoor.

Use the hardware provided or consult your

hardware retailer for fastening hardware for your

parcular mounng surface.

NOTE: This safe must be mounted to the ﬂoor.

Failure to do so will compromise the safety and

security of the safe.

TURNING THE SOUND OFF/ON BACK UP KEY

A "Back Up Key" has been provided in case the

baeries run low. If you lose your key, you may

purchase a replacement key be referencing the

serial number located on the back of your safe

or the front lower right corner. See secon

regarding replacement keys for further

informaon.

1. Remove the cover by pressing the tab and

turning the cover as shown in the illustraon.

The lock can hang by the connecng cable while

unlocking the safe.

2. Insert the key in the key hole and turn

clockwise 1/4 turn (unl stopped) in order to

unlock the safe. Rotate the handle and open

the door.

3. Keep the door open unl you have recorded a

new ﬁngerprint. Before entering your new

recorded ﬁngerprint remove the key and screw

the cover back in place.

4. Scan your new ﬁngerprint following the

instrucons for recording your ﬁngerprint.

TAB

40717-1704 616

BACK UP KEY SHELF

The safe includes a removable shelf, which is

posioned towards the front of the safe. There is a

gap between the back of the shelf and back wall of

the safe that can accommodate long gun barrels.

STACK-ON

PRODUCTS CO.

P.O. BOX 489, WAUCONDA, IL 60084

IMPORTANT

Keep keys in a secure place, away from children.

Keep this record of your key number, serial number

in a secure place separate from your safe. To order a

replacement key set, follow the instrucons on the

aached form.

Pistol rack extensions can be added to the pistol

rack by by threading the eye of the extension loop

through the pistol rack hook.

Secure the stabilizing plates to the back wall of the

safe carpet.

Image does not necessarily

reflect the style of weapon.

Pistols can be stored for quick access by sliding the

gun’s barrel over the hook. Secure the pistol rack

by aaching the stabilizer plate aachment to the

back wall of the safe carpet.

Long guns can be stored between the pistol racks.

Pistol racks are removable. Remove the screws

from the barrel rest. Remove the barrel rest and

simply pull the wire hooks oﬀ the barrel rest.

Reaach barrel rest.

PISTOL RACKS

Image does not necessarily

reflect the style of weapon.

Key Request

This is not a Registration Form

Verification of ownership is required in order to receive replacement key for your security product.

In order to receive a replacement key to your security product:

1. Complete the following form and send to Stack-On Products.

2. Send a copy of your valid driver’s license along with the form.

3. Send a copy of the receipt showing the original purchase.

4. Security product owner must sign form.

5. Owner’s signature must be notarized.

6. Send $10.00 for replacement key. Personal Check, MasterCard, or Visa accepted.

7. Send completed information to:

Stack-On

Products Company

1360 N. Old Rand Road

P.O. box 489

Wauconda, IL 60084

Serial Number______________________ Key Number (if applicable) _______

Unit Dimensions________________________________________

Unit Description___________________________________________________________

Owner’s Name ____________________________________ Date Purchased___/___/____

Owner’s Address ___________________________ Unit or Apt Number _________________

City ___________________________ State _______________ Zip Code________________

Telephone Number: (____)___________________ Fax Number: (____)___________________

Owner’s Email Address: ________________________________________________________

Owner’s Signature __________________________ Notary Signature________________

Notary Commission Expires: _____/_____/_____ Notary Stamp

SERVICE REQUESTED

Key Replacement: Yes No

$10.00 charge for this service

Credit Card Information (Please circle one) MasterCard Visa

Expiration Date: ___/___/___ Card Number:______________________________________

Credit Card Identification Number (Located on back of card, last 3 digits on signature strip)_________

9/07

NOTE: You can store your Key #, Serial # on Stack-On’s SECURE website – stackon.com under Customer Service.

Storing your Key # will provide instant access to this important information should you ever lose your keys.

Only you will have access to this information.

40717-1704 716

40717-1704 816

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER

RIGHTS WHICH VARY FROM STATE TO STATE.

IN NO EVENT SHALL STACK-ON’S OBLIGATION UNDER THIS WARRANTY EXCEED THE

PRICE OF THE PRODUCT.

STACK-ON’S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED

EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT, AS

DESCRIBED ABOVE, OR A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.

STACK-ON WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE INITIAL

CONSUMER FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, OR

PUNITIVE DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ANY STACK-ON

PRODUCTS, INCLUDING THE SAFES.

THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES

EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED AND

EXCLUDED. STACK-ON SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR

LIABILITIES. STACK-ON NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO

ASSUME FOR IT, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF

STACK-ON’S STEEL SAFES.

THIS WARRANTY DOES NOT COVER ANY PRODUCT, OR ANY PART OF ANY PRODUCT,

WHICH HAS BEEN SUBJECT TO EXCESSIVE USE, ACCIDENT, NEGLIGENCE, ABUSE OR

MISUSE, INCORRECT MAINTENANCE, ALTERATION OR REPAIR BY ANYONE OTHER

THAN STACK-ON. IN ADDITION, THIS WARRANTY DOES NOT COVER ANY ACCESSORIES

OR PARTS USED WITH OR IN THE PRODUCT WHICH ARE NOT INCLUDED WITH THE

ORIGINAL PURCHASE.

If Stack-On is properly notified during the three-year warranty period and, after inspection

confirms there is a defect, Stack-On will, at its sole option, provide repair parts or exchange the

product at no charge, or refund the purchase price of the product.

Stack-On

Products Company

1360 North Old Rand Road

Wauconda, IL 60084

[email protected]

If you believe there is a defect in material or workmanship in your Steel Safe during the

three-year warranty period, please contact our customer service department, by regular mail or

email at the address listed below, and include with your correspondence proof of purchase

information and the model number of the safe.

Stack-On Products Co. (“Stack-On”) Steel Safes are warranted to be free from defects in

material and workmanship for a period of three (3) years from the date of original purchase by a

consumer. This warranty extends to the initial consumer only.

LIMITED THREE YEAR WARRANTY

STEEL SAFES

Serie # :

ADVERTENCIA

Peligro de Vuelco

Un niño o un adulto puede volcar la caja

fuerte y ser matado o herido gravemente.

El fracaso para asegurar la caja fuerte, como

se muestra en estas instrucciones puede

causar la muerte o lesiones graves a los

niños y adultos.

Los niños no deben jugar con o alrededor

de la caja de seguridad en cualquier

momento.

IMPORTANTE:

40717-1704 916

SHD-SU-BG-B INSTRUCCIONES

taladro

Poco 3/8 taladro

Bit 05.16 taladro

7/16 bits de perforación

17mm llave de tubo

Destornillador Phillips.

(2) tornillos Lag

(2) arandelas de junta

(2) anclajes de plásco

HARDWARE INCLUIDO:

HERRAMIENTAS NECESARIAS:

DISPONER LA BATERÍA

Por favor deseche las

baterías usadas según la

ley municipal o provincial

NOTA : Usted puede almacenar su clave # , # de

Serie y combinación en el sio web seguro de

Stack-On -

stackon.com bajo Servicio al Cliente.

El almacenamiento de la clave # o combinación

proporcionará acceso instantáneo a la información

importante en caso de que alguna vez perder las

llaves o su combinación.

Sólo tendrá acceso a esta información.

• Mantenga las llaves y la combinación en un

lugar seguro lejos de los niños .

• No guarde una copia de seguridad o la clave

de este documento en la caja fuerte .

• NOTA : Stack-On no se hace responsable por

cualquier costo incurrido si el seguro es

reemplazado debido a una inundación.

• No guarde los medios electrónicos , discos

de computadora , medios -Visual audio o

negavos fotográﬁcos En este seguro. Este

equipo no va a sobrevivir la temperatura

interna nominal de la caja fuerte. Este

material puede ser dañado o destruido.

• Advertencia : Mantenga su caja fuerte cerrada

y bloqueada en todo momento cuando no esté

en uso. Niños accidentalmente podrían ser

encerrados en la caja fuerte.

• No mueva esta caja fuerte usando la manija.

El mango sólo debe ulizarse para abrir y cerrar

la puerta de la caja fuerte.

• Anote el número de serie de la equeta en la

parte posterior de la caja fuerte o de la equeta

en la parte inferior delantera de la caja fuerte.

INSTALACIÓN DE LA BATERÍA

Primero debe instalar las baterías que se

encuentran en la espuma de poliesreno de

protección fente.

Esta caja fuerte uliza 4 - pilas AAA. Bajo uso

normal, las pilas duran aproximadamente 1 año.

NOTA: No mezcle pilas viejas y nuevas. No

mezcle pilas alcalinas , pilas estándar o

recargables.

NOTA: Al cambiar o instalar las pilas, no rar

los cables. Hacer esto podría causar que la fuente

de alimentación se desconecte de la cerradura.

NOTA: Si las baterías están bajas, el indicador

parpadeará en verde y rojo cuando se inicia la

exploración. Reemplazar con 4 nuevas pilas

alcalinas AAA.

Para reemplazar las baterías, rerar la planlla del

bloqueo presionando la lengüeta y girando la

cubierta como se muestra en la siguiente

ilustración.

40717-1704 1016

Baterías

VISTA

TRASERA

Tapa de

la batería

Tapa de

la batería

Abra el comparmento de las pilas situada en

laparte posterior de la placa frontal de la

cerradura. Consulte la imagen siguiente.

Una vez instaladas las baterías , vuelva a

colocar la placa frontal por torsión en la

dirección opuesta de la ilustración de la

página anterior.

LENGUA

Table des matières

Langues :

Autres manuels Stack-On Sûr

Stack-On

Stack-On SECURITY PLUS Manuel utilisateur

Stack-On

Stack-On PS-15-20-B Manuel utilisateur

Stack-On

Stack-On PS-15-05-B Manuel utilisateur

Stack-On

Stack-On QPS-2012-E Manuel utilisateur

Stack-On

Stack-On Security Plus QAS-1304 Manuel utilisateur

Stack-On

Stack-On PWS-1855-E Manuel utilisateur

Stack-On

Stack-On W-22-BH-E-S Manuel utilisateur

Stack-On

Stack-On PS-7-B Manuel utilisateur

Stack-On

Stack-On PWS-15522 Manuel utilisateur

Stack-On

Stack-On PC-1702-RFID Manuel utilisateur

Stack-On

Stack-On SECURITY PLUS Manuel utilisateur

Stack-On

Stack-On QAS-1514 Manuel utilisateur

Stack-On

Stack-On QAS-1304-12 Manuel utilisateur

Stack-On

Stack-On PWS-1555 Manuel utilisateur

Stack-On

Stack-On GCB-18C Manuel utilisateur

Stack-On

Stack-On GCG-8RTA Manuel utilisateur

Stack-On

Stack-On E-48-MG-C-S Manuel utilisateur

Stack-On

Stack-On SS-22-MB-E Manuel utilisateur

Stack-On

Stack-On E-24-MG-C-S Manuel utilisateur

Stack-On

Stack-On QAS-450-B Manuel utilisateur

Stack-On

Stack-On QAS-1512 Manuel utilisateur

Stack-On

Stack-On PC-900-B Manuel utilisateur

Stack-On

Stack-On GCB-1522 Manuel utilisateur

Stack-On

Stack-On Security Plus QAS-1310 Manuel utilisateur

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Phoenix

Phoenix FS0352C Fiche d'information produit

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Honeywell

Honeywell 5912 Manuel utilisateur

Phoenix

Phoenix FS1280F Manuel utilisateur

Phoenix

Phoenix SS0992K Fiche d'information produit

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Phoenix

Phoenix SS0100E Fiche d'information produit

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi