Spirit XT175 Manuel utilisateur
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW TREADMILL!
OWNER’S MANUAL
XT285
XT175 / XT285
1
Product Registration………………………………………………………………………..2
Important Safety Instructions…………………………………………………………….. 3
Important Electrical Information………………………………………………………….. 4
Important Operation Instructions…………………………………………………………. 5
ssembly Instructions………………………………………………………………………6
Folding & Transport Instructions…………..………………………………………………9
Operation of Your New Treadmill………………………………………………………….10
Target Heart Rate………………………………………………………………………….. 20
Using a Heart Rate Transmitter……………………………………………………………21
Heart Rate Control Operation…………………………………………………………….. 22
General Maintenance.……………….…………………………………………………….. 23
Service Checklist - Diagnosis Guide…………………………………………………….. 26
Manufacturer’s Limited Warranty…………………………………………………………. 27
Table f C ntents
XT175 / XT285
2
Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc. Your
new treadmill was manufactured by one of the leading fitness manufacturers in the world
and is backed by one of the most comprehensive warranties available. Through your dealer,
Spirit will do all we can to make your ownership experience as pleasant as possible for
many years to come. The local dealership where you purchased this treadmill is your
administrator for all Spirit warranty and service needs. Their responsibility is to provide you
with the technical knowledge and service personnel to make your experience more
informed and any difficulties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number,
and the date of purchase below to make any future, needed contact easy. We appreciate
your support and we will always remember that you are the reason that we are in business.
Please complete and mail your registration card today and enjoy your new treadmill.
Yours in Health,
Spirit Manufacturing, Inc.
Name of Dealer______________________________________
Telephone Number of Dealer___________________________
Purchase Date_______________________________________
RECORD YOUR SERIAL NU BER
Please record the Serial Number of this fitness product in the space provided below.
Serial Number_______________________________________
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to
Spirit Manufacturing, Inc. or register online at: spiritfitness.com/warranty.htm
XT175 / XT285 Ver.
CONGRATULATIONS ON YOUR
NEW TREADMILL AND WELCOME
TO THE SPIRIT FAMILY!
Pr duct Registrati n
XT175 / XT285
3
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill from the
electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the
treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet.
DO NOT USE AN EXTENSION CORD UNLESS IT IS 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END. DO NOT ATTE PT TO DISABLE THE GROUNDED PLUG BY USING
I PROPER ADAPTERS, OR IN ANY WAY ODIFY THE CORD SET. The treadmill should be
the only appliance in the circuit in which it is connected. A serious shock or fire hazard may
result along with computer malfunctions. See Grounding Instructions, page 3.
■ Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both
carpet and treadmill may result.
■ Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance
between the rear of the treadmill and any fixed object.
■ Keep children away from the treadmill. There are obvious pinch points and other
caution areas that can cause harm.
■ Keep hands away from all moving parts.
■ Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working
properly, call your dealer.
■ Keep the cord away from heated surfaces.
■ Do not operate where aerosol spray products are being used or where oxygen is
being administered. Sparks from the motor may ignite a highly gaseous environment.
■ Never drop or insert any object into any openings.
■ Do not use outdoors.
■ To disconnect, turn all controls to the off position, remove tether cord, then remove the plug
from the outlet.
■ Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
■ The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
■ Use handrails provided; they are for your safety.
■ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
for use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Imp rtant Safety Instructi ns
XT175 / XT285
4
WARNING!
●
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Large switching
currents of the drive motor will trip GFCI type outlets, as will any appliance with a large motor.
Route the power cord away from any moving part of the treadmill including the elevation
mechanism and transport wheels.
●
NEVER remove any cover without first disconnecting C power.
●
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be
affected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing. See Diagnosis
Guide, page 27.
●
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The temperature specification is 40
to 120 degrees Fahrenheit, and humidity limit is 95%, non-condensing (no water drops forming on
surfaces).
This product must be grounded. If the treadmill should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the
plug illustrated below. temporary adapter that looks like the adapter illustrated below may be
used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is
not available. The temporary adapter should be used only until a properly grounded outlet, (below)
can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending
from the adapter, must be connected to a permanent ground such as a properly grounded outlet
box cover. Whenever the adapter is used, it must be held in place by a metal screw.
Imp rtant Electrical Inf rmati n
Gr unding Instructi ns
Grounded Outlet
Grounding Pin Grounded Outlet Box
Metal Screw
dapter
Tab of
Grounding
Screw
XT175 / XT285
5
● NEVER operate this treadmill without reading and completely understanding the results of any
operational change you request from the computer.
● Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
● NEVER use your treadmill during an electrical storm. Surges may occur in your household power
supply that could damage treadmill components.
● Use caution while participating in other activities while walking on your treadmill; such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the center of the belt, which may result in serious injury.
● NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills start with at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the
belt during slow acceleration is proper after you have learned to operate the unit.
● lways hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel
the buttons are not functioning properly with normal pressure contact your Spirit dealer.
safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all
times. It is for your safety should you fall or move too far back on the tread-belt.
Pulling this safety tether cord will stop tread-belt movement.
To Use:
1. Place the magnet into position on the round metal portion of the console control head. Your
treadmill will not start and operate without this. Removing the magnet also secures the treadmill from
unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet
has strong enough power to minimize accidental, unexpected stopping. The clip should be attached
securely to make certain it does not come off. Be familiar with its function and limitations. The treadmill
will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the
console. Use the red Stop / Pause switch in normal operation.
Safety Tether C rd
Imp rtant Operating Instructi ns
XT175 / XT285
6
Assembly Pack Check List (XT175 / XT285)
#94. 5/16” x15m/m
Button Head Socket Bolt (14 pcs)
#30.Safety Key (1pc) #59.Lubricant (1pc)
#98.M6 llen Wrench (1pc)
#97.Combination M5 llen Wrench
& Phillips Head Screwdriver (1 pc)
#95. 5/16” x 19 x 1.5T
Curved Washer (4 pcs)
#96. M5 x 15 m/m
Phillips Head Screw (6 pcs)
#146. 5/16” x 3/4”
Button Head Socket Bolt (4 pcs)
XT175 / XT285
7
!!ATTENTION: I PORTANT UNPACKING INSTRUCTIONS. PLEASE
READ BEFORE UNPACKING YOUR FOLDING TREAD ILL!!
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the
strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the treadmill is
positioned flat on the ground, in the orientation it would be in if you were using the treadmill. Do not
turn the treadmill up on it’s side while removing the shipping strap. This could cause the treadmill’s
folding mechanism to spring open. If the end of the Velcro strap (that you need to grab to remove it)
happens to be under the treadmill deck, reach under the deck to grab it, but do not tilt the treadmill up
to gain access to the strap end.
XT175 / XT285
8
Assembly
■ STEP 1
Remove all parts from the carton.
■ STEP 2
Connect Lower computer(38) cable with Middle computer cable(37).
37
38
■ STEP 3
Hand tighten Right and Left uprights into the upright receiving of frame base with eight 5/16”x
15m/m Button Head Socket bolts (94) and two 5/16” x 19 x 1.5T Curved Washers (95) by
using the Combination M5 llen wrench & Phillips head screwdriver (97).
Assembly Instructi ns (XT175 / XT285)
XT175 / XT285
9
■ STEP 4
Connect Middle computer cable (36) with Upper computer cable (37).
■ STEP 5
Install the Console Support into the Right and Left uprights with six 5/16” x 15m/m Button
Head Socket bolts (94) and 2pcs of 5/16” x 19 x 1.5T Curved Washers (95).
Install Upper computer cable (36) into the console.
Install Speed cable(25) and Incline cable(26) into the console.
Install two hand pulse cables(27-1) into the console(39).
■ STEP 6
Slide the Console onto console support plate and attach with six M5 x 15 m/m Phillips head
screws (96). Note that the console support plate should be inside the console housing and the
mounting screws are installed through the plastic housing and into the mounting plate.
Autres manuels pour XT175
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Spirit tapis roulant
Spirit
Spirit XT185 Manuel utilisateur
Spirit
Spirit XT485 Manuel utilisateur
Spirit
Spirit SPT0063 Manuel utilisateur
Spirit
Spirit XT 9 Manuel utilisateur
Spirit
Spirit XT675 Manuel utilisateur
Spirit
Spirit CT900 Manuel utilisateur
Spirit
Spirit XT175 Manuel utilisateur
Spirit
Spirit CT 900 TFT Manuel utilisateur
Spirit
Spirit 1622768 Manuel utilisateur
Spirit
Spirit 16007603850 Manuel utilisateur
Spirit
Spirit XT485 Manuel utilisateur
Spirit
Spirit XT285 Manuel utilisateur
Spirit
Spirit Esprit CT80 Manuel utilisateur
Spirit
Spirit XT375 Manuel utilisateur
Spirit
Spirit SL188 Manuel utilisateur
Spirit
Spirit XT385 Manuel utilisateur
Spirit
Spirit 16117701 Manuel utilisateur
Spirit
Spirit XT685 Manuel utilisateur
Spirit
Spirit CT900ENT Manuel utilisateur
Spirit
Spirit CT 800 Manuel utilisateur
Manuels tapis roulant populaires d'autres marques
Smooth Fitness
Smooth Fitness EVO 3i Manuel utilisateur
NordicTrack
NordicTrack NETL81810.0 Manuel utilisateur
Schwinn
Schwinn 830/Journey 8.0 Manuel utilisateur
Keys Fitness
Keys Fitness HealthTrainer HT-740T Manuel utilisateur
NordicTrack
NordicTrack T 14.0 Treadmill Manuel utilisateur
Master
Master F22 Manuel utilisateur