Sovol SV01 Manuel

SV01

Guide Book

To make Top-quality 3d printer

V.2.0En

Select the correct input voltage to mach your local mains (220V or 110V).

Not use the printer any way other than described here in order to avoid personal injury or property damage.

Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a well-ventilated,

low-dust enviroment.

Do not expose the printer to violent vibration or any unstable enviroment, as this may cause poor print quality.

Before using experimental or exotic laments, we suggest using standard laments such as ABS or PLA to calibrate and test

the machine.

Do not use other power cable except the one supplied. Always use a grounded three-prong power outlet.

Do not touch the nozzle or printing surface durint operation as they may be hot. Keep hands away from machine while in

use to avoid burns or personal injury.

Do not wear gloves or loose clothing when operate the printer. Such cloths may become tangled in the printer moving parts

leading to burns. Possible bodily injury, or printer damage.

When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle directly when heated.

This can cause personal injury.

Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered

printing plastics or any othe material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the

print surface before every print for consistent results.

Children under 10 years of age should not use the printer without supervision.

Notes

Preface

This Guide is designed for Sovol users to start their

printing journey.

We still recommend that please read this guide even if

you are familiar with the 3d Printing technology, as

there are lots of important information about the sovol

for you get a better 3d experience.

In this guide there are links to video tutorials and

downloads, use the Qr-codes or Click to access.

Additional resources and information:

(1) Quick start Guide

Quick start user guide or video found on the Micro Sd

card.

(2) Ofcial website: www.sovol3d.com

Find out all the latest news which contains the

up-to-date information concerning software, rmware,

device maintenance and so on.

3) Sovol Ofcial User Group on Facebook.

Be a part of the Sovol community sharing your projects

and helping each other.

Index

02 Printer Parts

03 Box Contens

04 Assembly

08 Cable Connection

09 Quality Adjustments

10 Screen Information

11 Bed Leveling

12 Loading Filament

13 Software Installation

14 Preparing to Print

15 Conection Diagram

16 BLTouch Installation

17 After-Sales Service

5 6

Printer Parts

1. X Axis Motor

2. Main control box

3. Hot bed

4. TF Card and Usb

5. Display screen

6. Button knob

7. Nozzle kit

8. Extrusion kit

9. Filament holder

10. Filament sensor

11 Couplers

12. Y Axis Motor

13. Foot pad

14. Z Axis Motors

15. Power switch

16. Leveling nut

12 13 14

Box Contens

1. Gantry

2. Base with hot bed

3. Filament holder

4. Display Screen

5. Usb cable

6. Z Axis switch limit plate

7. Screws, T-Nuts and extra nozzle

8. Micro SD card and Reader

9. Power cable

10. Filament (200gr.)

11 Pliers

12. Spatula

13. Tool set

14. Nozzle cleaner (0.4mm)

Assembly Steps 1-2

M5x25 + WASHERS (4 Units)

Front

Remove the parts from the box.

Note that the base and gantry are

connected at the factory. If possible,

perform this operation with the help

of another. Remove any tape and

padding from the parts. Inspect the

parts to make sure they were not

damaged in shipment.

Install the gantry (A) to the base (B).

a) On the gantry frame make sure

the nozzle assembly is in to the

front, and the long vertical leads

screws is in to the back.

b) On the base frame, make sure

the black belt tensioner is on the

front, and the stepper motor is on

the back.

Use the M5x25 screws (4) with their

washers. Lift the base frame. Install

the screws through the base frame

into the threaded holes in the gantry

frame. Tighten with an Hex key

(Allen). Do not exceed tightening to

avoid deformations in the frame.

Front

4mm

33Install the lament spool holder.

Secured in the screw hole of the

lament holder with M4x8 (2)

and M4 T-Nut (2). Loosen the

T-nuts by hand and turn them so

they will t inside the grooves on

the frames.

You want the nuts to be loose so

that when you tighten the bolts,

the nut will rotate 90° and grab

onto the inside of the groove.

Tighten with an Hex key (Allen).

Assembly - Step 3

M4x8 + T-NUTS (2 Units)

2.4mm

4Install the lament sensor.

The plate with the lament sensor is

installed in the upper rear part of the

frame. The correct direction is indicated by

an arrow on the sensor housing. Fixing to

the frame is similar to the method used

previously. Use the M4x8 (2) screws with

M4 T-Nut (2). Loosen the T-nuts by hand,

when you tighten the screws, the nut will

rotate 90° and grab onto the inside of the

groove.

Install the Lcd screen.

The screen is mounted on the right front of

the base frame. Use the M5x20 (2) screws

provided with their washers. Install the

screws throught the Screen plate into the

threaded holes in the bottom frame.

In another step, we will explain how to

make screen connections

M5x20 + WASHERS

(2 Units)

M4x8 + T-NUTS (2 Units)

Assembly - Steps 4-5

2.4mm

4mm

Assembly - Step 6

6Install the Z limit switch

This device sets the starting height of the

Z axis, which is responsible for the up and

down movement of the print head.

It is placed next to the left Z stepper motor

and xed to the edge of the vertical frame

using the included T-nuts.

Loosen the T-nuts, place a card or slightly

thick paper in the bottom frame and rest

the sensor plate on the top. This will

provide the correct minimum height,

slightly above the horizontal prole. Tighten

the screws and connect the 2-wire

connector labeled "Z".

M4x10 + T-NUTS (2 Units)

3mm

EXP1

EXP2

4-WIRE CONNECTORS

X Y Z

2-WIRE CONNECTORS

ZZ EYX

Make connections

The cables are provided with

labels, observe them and the type

of connector for proper

identication.

Make the connections being

careful not to bend the connector

pins.

The display board has three

identied inputs. Connect the

Exp1 and Exp2 cables in their

corresponding place leaving the

Exp3 input empty..

Cable Connection

IMPORTANT

Do not forget to place the voltage selector in the position

corresponding to your local mains (220V or 110V).

Use a grounded electrical outlet.

Table des matières

Autres manuels Sovol Imprimante 3D

Sovol

Sovol SV02 Manuel

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur