SOUNDMASTER CD9170 Manuel utilisateur
CD9170 / English manual
ENG 1
LOCATION OF CONTROLS
1. Dir UP / ASP button
2. EQ button
3. MODE / PROG button
4. SKIP / SEARCH DN button
5. STOP button
6. PLAY / PAUSE button
7. SKIP / SEARCH UP button
8. LCD display
9. Battery compartment
10. Open knob
11. Volume knob
12. Phone jack
13. DC jack
PREPARATION BEFORE USING
Battery Installation
1. Open Battery Compartment cover.
2. Insert 2 batteries ( UM-3, “AA”, LR6 or equivalent ) in the correct polarity as indicated.
(Heavy duty batteries are recommended).
3. Close the cover properly.
*In order to operate the player on batteries, the optional AC/DC adaptor must be
disconnected from the DC 4.5V Jack.
AC—DC Adaptor
*Before connection, make sure theAC voltage of the adaptor correspond to your localAC
outlet voltage.
CD9170 / English manual
ENG 2
1. Plug the DC output of the adaptor to the DC 4.5V jack.
2. Connect the adaptor (4.5V/600mAwith polarity ) to a power outlet.
DISC PLAYING
Sound Effects
During playback you can choose between the following Sound Effects:” BBS, Pop, Jazz, Rock,
and Classic”, by pressing EQ BUTTON repeatedly. To turn off the effects, press the EQ
BUTTON repeatedly until the “Sound Effects” indicator disappears.
Getting Start
1. Insert the headphone/earphone plug to PHONE JACK.
2. Press the OPEN KNOB, and then the door opens, put a disc into the CD compartment with
label side upward.
3. Push the disc gently around the centre area until it clicks so that the disc fits into the pivot.
(To remove the disc: pick up the disc, holding the edge, while pressing the pivot gently.)
4. Close the door and press the PLAY/PAUSE BUTTON once.
5. The Display will show the total number of tracks/files/directories of the disc, and then it
begins to play the first track/file.
General Operation
PLAY/PAUSE BUTTON —Press once to start playback in the original order.
Pressagaintostopthediscplaytemporarily.
STOP BUTTON ■—Press once to stop playback.
Pressagaintoturnoffpower.
SKIP/SEARCH BUTTONS —Press once to skip to next track or back to
previous track .
Presscontinuouslytosearchforward or
backward .
DIRUP/ASPBUTTON —ASP ON/OFF ( For CD ).
—Directory UP ( For MP3 Disc ).
Automatic Turn Off (Auto Power Off)
If the player is in STOP mode for approximately 30 seconds, it will turn off automatically.
CD9170 / English manual
ENG 3
Various Playing Modes
MODE BUTTON —There are 3 kinds of function: ( FOR CD ) :
A. Repeat Play
During Play Mode
·Press the MODE BUTTON once to play current track repeatedly.
·The repeat indicator will appear in the display.
During Play Mode
·Press the MODE BUTTON twice to play the entire disc repeatedly.
·The repeat indicator will appear in the display.
NOTE –To cancel REPEAT PLAY simply press the MODE BUTTON until the repeat
Indicator disappears.
B. Intro Scan,
During Play Mode
·Press the MODE BUTTON three times.
·The INT indicator will appear in the display.
·Press the PLAY BUTTON to play the first 10 seconds of each track on the disc.
NOTE –To cancel INTRO SCAN, simply press the MODE BUTTON until the INT indicator
disappears.
C. Random Play
During Play Mode
·Press the MODE BUTTON four times.
·The SHUF indicator will appear in the display.
·Press the PLAY BUTTON, all the tracks on the disc will be played in random sequence.
After all the tracks have been played, the system will stop automatically.
NOTE –To cancel RANDOM PLAY, simply press the MODE BUTTON until the SHUF
indicator disappears.
CD9170 / English manual
ENG 4
MODE BUTTON —There are 3 kinds of function: ( FOR MP3 DISC ) :
A. Repeat Play
During Play Mode
·Press the MODE BUTTON once to play current track repeatedly.
·The repeat indicator will appear in the display.
During Play Mode
·Press the MODE BUTTON twice to play the ENTIRE DISC repeatedly.
·The repeat indicator will appear in the display.
During Play Mode
·Press the MODE BUTTON three times to play the current DIRECTORY repeatedly.
·The repeat indicator
will appear in the display.
NOTE –To cancel REPEAT PLAY, simply press the MODE button until the repeat indicator
disappears.
B. Intro Scan
During Play Mode
·Press the MODE BUTTON four times.
·The INT indicator will appear in the display.
·Press the PLAY BUTTON to play the first 10 seconds of each track on the disc.
NOTE –To cancel INTRO SCAN, simply press the MODE BUTTON until the INT indicator
disappears.
C. Random Play
During Play Mode
·Press the MODE BUTTON five times.
·The SHUF indicator will appear in the display.
·Press the PLAY BUTTON, all the files on a disc to be played in a random sequence and
after all files are played, system will stop automatically.
NOTE –To cancel RANDOM PLAY, simply press the MODE BUTTON until the SHUF
indicator disappears.
CD9170 / English manual
ENG 5
Program Play ( FOR CD )
1. In stop mode, press the PROG BUTTON to make program memory.
2. “ ” will be displayed, “ 00” means track number to memory and “01” means program
number.
3. Press or button to select the desired track.
4. Press the PROG BUTTON to enter the track into memory, the program numbers which will
be increment one step.
※The program no. “01” has become “02” on the display.
5. Repeat step 3 and 4 until memory is full. ( 64 tracks )
6. Press BUTTON to start the program play.
7. To stop the program play, press the STOP BUTTON.
8. For program play in step “ 7 ”, press the PROG BUTTON, then the BUTTON.
9. To check the program memory, in program play mode, press the or BUTTONS.
10. To erase the program memory, open the door or turn off the power.
Program Play ( FOR MP3 )
1. In stop mode, press the PROG BUTTON to make program memory.
2. “ ” will be displayed, “ 000” means file number, “01” means program number.
3. Press the DIR UP/ASP BUTTON to select the desired directory, the display will become
“”, “01” means directory number.
4. Press the or BUTTONS to select the desired file.
5. Press the PROG BUTTON to enter the directory and file into memory. The program number
which will be increment one step.
※The program no. “01” has become “02” on the display.
6. Repeat step 3 and 5 until memory is full. ( 64 files ).
7. Press BUTTON to start the program play.
8. To stop the program play, press the STOP BUTTON.
9. For program play in step “ 8 ”, press the PROG BUTTON & BUTTON.
10. To check the program memory, in program play mode, press the or BUTTONS.
11. To erase the program memory, open the door or turn off the power.
※If you do not need to select directory but only select files, the above step 3 can be
skipped.
Digital Anti- Shock Operation
The DIGITAL ANTI-SHOCK PROTECTION function uses semiconductor memory to prevent
the unit from skipping when the unit is subjected to shocks and vibration during play.
When the PLAY/PAUSE BUTTON is pressed and the power turns on, the “ASP” appears and
the DigitalAnti-Shock Protection function turns on automatically.
CD9170 / English manual
ENG 6
LOW BATTERY ALERT
When the low battery indicator appears on the display, please prepare to replace the new
batteries.
SPECIFICATIONS
OutputPower : ≥15 mW ( 32 Ω)
Freq. Response : 100 ~ 20000 Hz
PowerSource : 2×UM-3”AA” LR6 size batteries ( batteries not included )
4.5v(600mA) AC-DC adaptor
Dimensions : 141mm(W) ×140mm(D) ×26mm(H)
** For improvement purposes, specification and design are subject to change without notice. **
Table des matières
Autres manuels SOUNDMASTER Lecteur CD
SOUNDMASTER
SOUNDMASTER RCD5000 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD5410 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD6450 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER MCD7950 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER URD-800 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER CD9250 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER RCD 1100 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD-3700 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER RCD1180 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD5750 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER High line SCD 2700USB Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD2350 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD 6600 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER RCD1750SI Manuel utilisateur
SOUNDMASTER
SOUNDMASTER DAB970 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD-5600 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD8000 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER CD9180 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER SCD-5500 Manuel utilisateur
SOUNDMASTER
SOUNDMASTER RCD1200 Manuel utilisateur
