Soundcore Trance Manuel utilisateur

Soundcore

Soundcore Trance / Mega

User Manual

1 Important Safety Instructions

● Please read this user manual carefully and save it for future reference.

● Do not place naked flame sources, such as lighted candles, on or near the

product.

● Do not install near any heat sources, such as radiators,heat registers,stoves,or

other apparatus.

● Clean only with a dry cloth.

● Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

● Protect the power supply or cord from being walked on or pinched, particularly at

plugs, convenience receptacles, and the point where they exit from the product.

● Only use attachments/accessories specified by the manufacturer.

● Unplug this product during lightning storms or when unused for long periods of

time.

● The maximum ambient temperature during use of the product must not exceed

45°C.

● Suitable for safe use in tropical and non-tropical areas.

● Only suitable for safe use in areas below 2000m above sea level.

● Do not make unauthorized alterations to the product; doing so may compromise

safety, regulatory compliance, system performance, and may void the warranty.

● Refer all servicing to qualified service personnel. Servicing is required when the

product has been damaged in any way.

● The product contains battery pack, so should not be exposed to excessive heat

such as sunshine, fire or the like.

2 What’s Included

3 At a Glance

3.1 Top Panel

①

● Press and hold for 2 seconds to power on / off.

②

● Press to enter Bluetooth pairing mode.

● Press and hold to enter True Wireless Stereo (TWS) mode while pairing.

③ (Source input button)

● Press repeatedly to select source input.

● Press and hold for 2 seconds to enter Bluetooth pairing mode.

④ /

● Press to skip to previous / next track.

⑤ - / +

● Press to decrease / increase volume.

⑥ (Multi-function button)

● Press to play / pause music.

● Press to answer or end a call.

⑦ (Light effect button)

● Press to turn on / off and adjust the light mode.

⑧

● Press to turn on or off the BassUP mode.

● Press and hold for 2 seconds to switch between indoor / outdoor sound mode.

3.2 Connectors (A3392)

① DC IN

● Connect to the provided power adaptor.

② USB

● Connect to a USB storage device.

● Charge a USB device.

③ AUX

● Connect to an external audio device through a 3.5mm aux cable (not provided).

④ Guitar / Mic port

● Connect to a guitar / microphone (not provided).

⑤ Guitar / Mic volume knob

● Rotate to adjust guitar / microphone volume.

3.3 Connectors (A3393)

① DC IN

● Connect to the provided power adaptor.

② USB

● Connect to a USB storage device.

● Charge a USB device.

③ AUX

● Connect to an external audio device through a 3.5mm aux cable (not provided).

4 Charging

4.1 Charging your Soundcore Speaker

● Fully charge this speaker when using for the first time, which prolongs the

lifespan of the built-in battery.

Use the provided power adaptor to charge this speaker.

LED behaviour ( )

Battery level <10%

Battery level 25% - 50%

Battery level 50% - 75%

Battery level 75% - 100%

Fully charged

4.2 Checking Battery Level

Press any button to check the remaining battery level when it is powered on.

LED behaviour ( )

Battery level <10%

Battery level 10% - 25%

Battery level 25% - 50%

Battery level 50% - 75%

Battery level 75% - 100%

4.3 Charging your USB Devices

Use this speaker as an external battery to charge your USB devices.

Connect your USB device to the USB port on the rear of this speaker.

5 Powering On / Off

Connect the provided power adaptor to the DC IN power jack of this speaker, and then

to an AC mains outlet.

Press and hold for 2 seconds to power on or off.

● Built-in battery can be used as power supply of this speaker.

● Unplug the power adaptor from the AC mains outlet when not in use for an

extended period of time.

● If this speaker is powered by built-in battery, it will power off automatically after

30 minutes of button inactivity or no audio playback.

● If this speaker is connected to AC power and the built-in battery is fully charged,

it will power off automatically after 30 minutes of button inactivity or no audio

playback.

6 Using your Soundcore

6.1 Bluetooth Mode

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

LED behaviour ( )

Flashing blue

Bluetooth pairing

Steady blue

Bluetooth connected

●Dual Bluetooth Connection: This speaker can pair up to two mobile devices via

Bluetooth. This speaker can only play music on one mobile device at the same

time.

● To pair with another Bluetooth device, press to re-enter Bluetooth pairing

mode.

● To play from another connected device, pause the currently active device first.

● Each time you power on your Soundcore speaker, it will automatically connect to

your last connected device if available within the Bluetooth range. If not, press

to enter Bluetooth pairing mode.

● You may also control music in the Soundcore App.

6.2 True Wireless Stereo (TWS) Mode

With True Wireless Stereo technology, you can pair your Soundcore Trance / Mega

with another Soundcore Trance / Mega to explore the best sound effects with left and

right sound channels separated on both speakers.

Press and hold on both Soundcore Trance / Mega speakers simultaneously to

enter TWS mode.

LED behaviour ( )

Autres manuels pour Trance

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Soundcore Intervenants

Soundcore

Soundcore A3371 Manuel utilisateur

Soundcore

Soundcore Flare 2 Manuel utilisateur

Soundcore

Soundcore Zero+ Manuel utilisateur

Soundcore

Soundcore Rave Manuel utilisateur

Soundcore

Soundcore Flare 2 Manuel utilisateur

Soundcore

Soundcore Wakey Manuel utilisateur

Soundcore

Soundcore Icon+ A3123 Manuel utilisateur

Soundcore

Soundcore Motion B Manuel utilisateur

Soundcore

Soundcore Rave Party 2 Manuel utilisateur

Soundcore

Soundcore Infini 2 Manuel utilisateur

Soundcore

Soundcore Flare S+ Manuel utilisateur

Soundcore

Soundcore Icon Mini Manuel utilisateur

Soundcore

Soundcore A3391Z12 Manuel utilisateur

Soundcore

Soundcore Flare 2 Manuel utilisateur

Soundcore

Soundcore Motion X500 Manuel utilisateur

Soundcore

Soundcore Motion X500 Manuel utilisateur

Soundcore

Soundcore Rave Neo 2 Manuel utilisateur

Soundcore

Soundcore Icon A3122 Manuel utilisateur

Soundcore

Soundcore Motion X600 Manuel utilisateur

Soundcore

Soundcore Soundcore Motion Boom Manuel utilisateur

Soundcore

Soundcore Glow Mini Manuel utilisateur

Soundcore

Soundcore Trance Go Manuel utilisateur

Soundcore

Soundcore Glow Mini Manuel utilisateur

Soundcore

Soundcore Flare Mini Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur