Soundcore Liberty 4 Manuel utilisateur
soundcore Liberty 4
USER MANUAL
EN 01
Download the soundcore app to enhance your experience with
features including heart rate monitoring, spatial audio, ambient sound
modes, HearID Sound, custom controls, firmware updates, and more.
If your earbuds cannot connect with the soundcore app, update it
to the latest version in your mobile app store.
1. Place the earbuds in the charging case and close it.
• Fully dry off the earbuds and the USB-C charging port before
charging.
115min=3hr
< 20%
20% - 60%
60% - 99%
2
5min 100%
<20% PAIRING
CONNECTED 1s 1s
1 2
soundcore
Liberty 4
soundcore
Liberty 4
ON
×1 5s
20% - 60%
×1 5s
60% - 100%
×1
5s
The earbuds can connect with two devices at the same time so you
can switch between them effortlessly.
To pair with another device, go to settings and select Dual
Connections >Connect New Device.
1
2
3
Open the charging case, the earbuds will automatically power on
and enter Bluetooth pairing mode. Select "soundcore Liberty 4"
from your device's Bluetooth list when connecting for the first time.
POWERING ON & PAIRING
CHARGING
DUAL CONNECTIONS
APP
L
S M1 M2
(Deeper)
1 2
Choose the Ear Tips that fit your ears best and take a fit test in the
soundcore app to ensure you get the best ANC performance.
WEARING
2. Connect the charging case to the power supply by using a certified
USB-C charging cable. Alternatively, position the charging case at
the center of your wireless charger for wireless charging.
• Fully charge both the earbuds and the charging case before the
first use.
EN 02
To manually enter Bluetooth pairing mode, place the earbuds in
the charging case and leave the case open, then press and hold the
button on the charging case for 3 seconds until the LED indicators
flash white rapidly.
PAIRING
CONNECTED
12
3s
1s 1s
In the app, you can customize controls for audio, voice assistant,
and ambient sound modes*.
*These controls do not work for calls.
×1
L/R
×2
L/R
ANC Transparency
Normal
L/R
×2
×1 ×2
TWS MONO
×3
L
×3
R
×3
L/R
×3
Voice
Assistant
Use the soundcore Wellness* feature for heart rate monitoring,
stress detection, workouts, and more.
*Only available when you are wearing the right earbud. There is a
red light when your blood oxygen is being measured.
1
2
3
4
5
Spatial Audio places sound all around you to create an immersive
listening experience. You can enable Spatial Audio and customize it in
the soundcore app.
• Head Tracking:
Hear surround sound that follows your head movement.
• Fixed: Listen to Spatial Audio without head tracking.
1
2
3
4
You can select HearID ANC, transparency, or normal mode in the
soundcore app.
• HearID ANC: Take the ear canal test and tailor your noise cancellation
experience.
• Transparency: Stay aware of your surroundings while listening to music.
LDAC
MANUAL PAIRING
CONTROLS
SPATIAL AUDIO AMBIENT SOUND
CONTROLS
TWS mode Mono mode
Play/Pause Press once (L/R) Press once
Next track Press three times (R) Press twice
Previous track Press three times (L) /
Answer/End a call Press twice (L/R) /
Reject a call Press three times (L/R) /
Switch ambient sound
modes
(ANC/Transparency/
Normal)
Press twice (L/R) /
Activate voice assistant
software /Press three
times
WELLNESS
EN 03
• Use devices powered by Android 8.0 or later to experience LDAC
quality sound.
• LDAC provides higher quality sound, increases power consumption,
and reduces playtime.
• Enable LDAC in a low-interference environment to ensure a stable
Bluetooth connection.
1. Go to settings in the soundcore app.
2. Click on "Sound Mode".
1
2
3
4
5
WEARING DETECTION
LDAC
1
2
3
4
5
3. Select "Preferred audio quality" to switch to LDAC codec.
4. You will be notified that the earbuds do not support LDAC when
connected to two devices. Select "Turn on" to continue.
5. It takes about 10 seconds to switch audio codecs. You may be
requested to update the earbuds' firmware if available.
L/R
L R
L/R
Playback will automatically pause when either earbud is removed
and will resume again when you wear it. Wear either earbud to
automatically answer an incoming call.
POWERING OFF
To power off, return the earbuds to the charging case and close the case.
The earbuds will automatically power off after 30 minutes if they are
not being worn and are not connected. The duration can be set in
the soundcore app.
1
2
RESET
1
10s
2
×3
LED LIGHT GUIDE
Reset if the earbuds have issues pairing with each other or with
other devices.
Delete the pairing history from your Bluetooth device first. Place
the earbuds in the charging case and leave the case open, then
press and hold the button on the case for 10 seconds until the LED
indicators flash white rapidly three times.
LED Description Battery level
during charging
Short light breathing red <20%
Short light breathing white 20% - 60%
Long light breathing white 60% - 99%
Long light steady white for 5 minutes 100%
EN 04
FIRMWARE UPDATE
You will be informed once the new version of firmware is detected
when you connect the earbuds with the app. Ensure the earbuds
are placed in the charging case and the case remains open until
the firmware update is completed. During the update, ensure the
earbuds are being charged and avoid any usage.
1
2
LED LIGHT GUIDE
LED Description Battery level
Short light breathing red once,
steady red for 5 seconds, and
then off
<20%
Short light breathing white once,
steady white for 5 seconds, and
then off
20% - 60%
Long light breathing white once,
steady white for 5 seconds, and
then off
60% - 100%
LED Description Status
X 3 Flashing white three times Reset completed
Flashing white Pairing
Steady white for 1 second,
off for 1 second, and then
flashing white slowly
Connected
Specifications are subject to change without notice.
Input 5 V 1 A
Rated output power 5 mW
Battery capacity 73mAh x 2 (earbuds);
500mAh (charging case)
Charging time Up to 2 hours
Playtime
(with ANC off)
Up to 9 hours (Total 28 hours
with the charging case)
Playtime
(with ANC on)
Up to 7 hours (Total 24 hours
with the charging case)
Driver unit 6mm and 9.2mm, coaxial dual
dynamic driver
Frequency response 20 Hz - 40 kHz
Impedance 16 Ω
Waterproof level (Earbuds) IPX4
Bluetooth version 5.3
Bluetooth range 10 m / 33 ft
SPECS
5s
5s
5s
Autres manuels pour Liberty 4
1
Table des matières
Autres manuels Soundcore Casque audio
Soundcore
Soundcore Life Q10 Manuel utilisateur
Soundcore
Soundcore Space Q45 Manuel utilisateur
Soundcore
Soundcore Liberty 2 Manuel utilisateur
Soundcore
Soundcore Life P2 Mini Manuel utilisateur
Soundcore
Soundcore R50i Manuel utilisateur
Soundcore
Soundcore Space Q45 Manuel utilisateur
Soundcore
Soundcore Life Q20+ Manuel utilisateur
Soundcore
Soundcore Spirit Dot 2 Manuel utilisateur
Soundcore
Soundcore Dot 3i Manuel utilisateur
Soundcore
Soundcore Sport X10 Guide d'installation
Soundcore
Soundcore A25i Manuel utilisateur
Soundcore
Soundcore A3910 Manuel utilisateur
Soundcore
Soundcore Spirit Pro Manuel utilisateur
Soundcore
Soundcore Liberty 4 Manuel utilisateur
Soundcore
Soundcore Sport Air Manuel utilisateur
Soundcore
Soundcore Liberty Air Manuel utilisateur
Soundcore
Soundcore Liberty 3 Pro Manuel utilisateur
Soundcore
Soundcore A20i Manuel utilisateur
Soundcore
Soundcore Life Q20 Manuel utilisateur
Soundcore
Soundcore Life Note E Manuel utilisateur
