Sony RM-B150 Manuel utilisateur
REMOTE CONTROL UNIT
RM-B150
MAINTENANCE MANUAL
1st Edition (Revised 2)
Serial No. 15001 and Higher
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
DieAnleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt dieAngaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien.Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
1(E)
RM-B150
Table of Contents
Manual Structure
Purpose of this manual ......................................................................................... 3(E)
Contents ................................................................................................................ 3(E)
Related manual ..................................................................................................... 3(E)
1. Installation
1-1. Connectors and Cables...........................................................................1-2(E)
1-1-1. Connector Input/Output Signals............................................1-2(E)
1-1-2. Connection Connector...........................................................1-2(E)
1-1-3. Wiring Diagrams for Cables .................................................1-3(E)
1-2. Notes on Installation ..............................................................................1-4(E)
1-3. Function of Internal Switch....................................................................1-4(E)
2. Service Overview
2-1. Removing the Cabinet............................................................................2-1(E)
2-2. Location of Printed Wiring Boards ........................................................2-2(E)
2-3. Circuit Description .................................................................................2-3(E)
2-4. Self-Diagnosis ........................................................................................2-4(E)
2-5. Description on Flexible Card Wire ........................................................2-6(E)
2-5-1. Disconnecting/Connecting the Flexible Card Wire ..............2-6(E)
2-5-2. Forming Before Installation ..................................................2-6(E)
2-6. Replacing the Printed Wiring Board ......................................................2-7(E)
2-6-1. Replacing the CN-1651 board...............................................2-7(E)
2-6-2. Replacing the SW-963 board ................................................2-8(E)
2-7. Recommended Replacement Parts.........................................................2-9(E)
2-8. Notes on Service ....................................................................................2-9(E)
2-8-1. Note on Rubber Key..............................................................2-9(E)
2-8-2. Note on Flash Memory........................................................2-10(E)
2-8-3. Notes on Repair Parts..........................................................2-10(E)
2-8-4. Optional Fixture ..................................................................2-10(E)
3. Electrical Alignment
3-1. Preparation .............................................................................................3-1(E)
3-2. Adjusting the Video Level .....................................................................3-2(E)
2(E) RM-B150
4. Spare Parts
4-1. Exploded View ............................................................................................4-2
4-2. Electrical Parts List .....................................................................................4-4
4-3. Supplied Accessory ...................................................................................4-10
4-4. Optional Fixture ........................................................................................4-10
4-5. Changed Part .............................................................................................4-11
5. Semiconductor Pin Assignments
6. Block Diagram
Overall Block ..............................................................................................6-1
7. Schematic Diagrams
VA-186........................................................................................................7-1
CPU-266......................................................................................................7-3
SW-962 .......................................................................................................7-5
Frame Wiring ..............................................................................................7-6
8. Board Layouts
CPU-266......................................................................................................8-1
SW-962 .......................................................................................................8-3
VA-186........................................................................................................8-5
CN-1651, LED-317, SW-963 .....................................................................8-7
3 (E)
RM-B150
Purpose of this manual This manual is the maintenance manual for Remote Control Unit RM-B150.
This manual describes the information items necessary when the unit is supplied and
installed, items that premise the service based on the components parts such as
alignment, schematic diagrams, board layouts and spare parts lists, assuming use of
system and service engineers.
Contents The following are summaries of all the sections for understanding the contents of
this manual.
Section 1. Installation
Describes information about ROM version check, connectors and cables, function of
internal switches and instance of system configuration.
Section 2. Service Overview
Describes circuit description, information about replacement of board and notes on
service.
Section 3. Electrical Alignment
Explains the general information for electrical adjustment and the adjustment
procedure of this unit.
Section 4. Spare Parts
Describes exploded views, parts list, supplied accessories and optional fixtures used
in the unit.
Section 5. Semiconductor Pin Assignments
Describes function diagrams and pin names of semiconductor used in the unit.
Section 6. Block Diagram
Describes overall block diagram and block diagrams for every circuit board.
Section 7. Schematic Diagrams
Describes schematic diagrams for every circuit board and frame wiring.
Section 8. Board Layouts
Describes board layouts for every circuit board.
Related manual Besides this maintenance manual the following manual is available for this unit.
..
..
.Operation Manual (Supplied with this unit)
This manual is necessary for application and operation of this unit.
Manual Structure
1-1(E)
RM-B150
The RM-B150 is equipped with various kinds of new functions. Depending on the camera that is connect-
ed to the unit, some functions require settings by using the menu of the RM-B150 and some functions
cannot be activated. See the following table for details.
Some functions become activated if the camera is equipped with the updated ROM. If the ROM version is
not applicable, make the settings by the menu or replace the ROM as necessary.
If the menu setting is required, refer to the operation manual supplied with the RM-B150. If ROM
replacement is required, consult your Sony service organization.
Section 1
Installation
Function BVP-900/950 BVP-700/750 BVP-570 BVP-500/550 HDC-700A/750A HDC-700/750 HDW-700/700A
Filter number
auto recognition Yes *1 Yes *2 Yes *2*2
GAIN L/M/H select
interlocking Yes *1 Yes *2 Yes *2*2
Iris Open/Close value
auto recognition Yes *1 Yes *2 Yes *2*2
White
Preset Yes No Yes *3 Yes *3*3
VTR
Control Start/Stop Yes No Yes *3 Yes *3*3
Except above No No No No No No *3
Camera setup menu
operation Yes No Yes *3 Yes No *3
Video monitor
output Yes No *4*4No No*5
*1: These are not functioned automatically. Perform manual settings by the menu of the RM-B150.
*2: If using these functions, check whether the ROM version for the camera/camcorder is applicable to the version shown below, or not.
If not, replace the ROM. Or perform manual settings by the menu of the RM-B150.
*3: If using these functions, check whether the ROM version for the camera/camcorder is applicable to the version shown below, or not.
If not, replace the ROM.
*4: Monitoring the video signals is enabled only for the BVP-550 series that is used together with the CA-570/530 series.
For the BVP-550 series that is used together with the CA-550/550P, or BVP-500/500P, monitoring is disabled.
*5: If using these functions, check whether the ROM version for the camcorder is applicable to the version shown below, or not.
If not, replace the ROM. The output signal is the only Y signal.
Applicable ROM Version
BVP-500/550 (IC36/AT-95 board): Ver. 4.00 or higher
HDC-700/750 (IC26/IF-569 board, IC24/SG-226 board): Ver. 3.00 or higher (for both ICs)
HDW-700/700A (IC15, 16/IF-667 board): Ver. 1.24 or higher (for both ICs)
1-2(E) RM-B150
1-1. Connectors and Cables
1-1-1. Connector Input/Output Signals
MONITOR
BNC 75 Z, 1.0 Vp-p
REMOTE (8P FEMALE)
No. Signal Specifications
1 TX (+) RM SERIAL DATA
2 TX (_)
3 RX (+) BVP/CCU/CNU
4 RX (_)SERIAL DATA
5 VIDEO (G) GND for VIDEO
6 POWER (+) IN +10.5 to 30 V
7 POWER (_) IN GND for POWER
8 VIDEO (X)OUT VBS 1.0 Vp-p, Zo = 75 Z
CHASSIS GND CHASSIS GND
1-1-2. Connection Connector
Connection made with the connector panel during installation or service, should be made with the
connectors/complete cable assemblies specified in the following list, or equivalent parts.
Connector Name Connection Connectors Connection Cables
MONITOR 1-569-370-12 Plug, BNC
(BNC)
REMOTE 1-766-848-11 Plug, 8P Male REMOTE cable 1-783-372-11
(8P FEMALE) (supplied with RM-B150, 10 m)*1, or
CCA-5 cable assembly (Option)
CCA-5-10 (10 m)/CCA-5-3 (3 m)*1*2
*1: If using a cable of length different from a standard product, consult your Sony organization.
*2: Use of the CCA-5 cable disables to monitor the video signals.
(External View)
1-1. Connectors and Cables
1-3(E)
RM-B150
1-1-3. Wiring Diagrams for Cables
1-1. Connectors and Cables
CCA-5 Cable
(Outer sheath color : White)
1
287
63
5
4
1
287
63
5
4
Black
Red
Red
Brown
BrownBrown
White
White
White
Orange
8P CONNECTOR(MALE)
(WIRING SIDE) 8P CONNECTOR(MALE)
(WIRING SIDE)
Black
Red
Brown
White
White
White
8P CONNECTOR(MALE)
(WIRING SIDE) 8P CONNECTOR(MALE)
(WIRING SIDE)
1
287
63
5
4
1
287
63
5
4
REMOTE Cable (supplied with RM-B150)
(Outer sheath color : Black)
1-4(E) RM-B150
1-2. Notes on Installation
Screw length limitations
When installing the unit in a console, use the specified screws (M2.6) in length as shown in the
figure.
Installation space
To avoid damage to a cable, leave the cable space shown in the figure to the rear of the unit.
1-3. Function of Internal Switch
CPU-266 board
S1: Not used
Always set to OFF.
Factory-set position: OFF
1-2. Notes on Installation
1-3. Function of Internal Switch
CAMERA MONITOR
Screw Screw
Screw holes
Screw
holes
10 mm or below
179
151
4686
48
63
10
20
Cable space
Unit : mm
Autres manuels pour RM-B150
1
Table des matières
Autres manuels Sony Télécommande
Sony
Sony RM-EZ2T Manuel utilisateur
Sony
Sony RM-IP10 Manuel utilisateur
Sony
Sony Remote Commander RM-V30 Manuel utilisateur
Sony
Sony RM-AV3000 Manuel utilisateur
Sony
Sony RM-LP211 Manuel utilisateur
Sony
Sony RM-X6S Manuel utilisateur
Sony
Sony RMT-DSLR2 Manuel utilisateur
Sony
Sony RM-NX7000 Navitus Manuel utilisateur
Sony
Sony RM-V20T Manuel utilisateur
Sony
Sony RMED044 Manuel utilisateur
Sony
Sony RM-BR300 - Remote Control Unit Manuel utilisateur
Sony
Sony RM-X12A Manuel utilisateur
Sony
Sony RM-VL1400T Manuel utilisateur
Sony
Sony RMF-TX611E Manuel utilisateur
Sony
Sony RM-TP504 Manuel utilisateur
Sony
Sony RM-US106 Manuel utilisateur
Sony
Sony RM-PP412 Manuel utilisateur
Sony
Sony RM-X55M Manuel utilisateur
Sony
Sony RMF-YD003 Manuel utilisateur
Sony
Sony Remote Commander Manuel utilisateur
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
