Sony SFM1 Manuel utilisateur
INSTALLATION MANUAL
SFM1
Sony Electronics, Inc.
16540 West Bernardo Drive
San Diego, CA 92127
www.sony.com
PBL-110 Projector Mount
Page 2 Installation Manual
SFM1
Installation Manual Page 3
Table Of Contents
Warning Statements .................................................................................................................................................... 4
Parts List ....................................................................................................................................................................... 5
Flat Panel List ............................................................................................................................................................... 5
Installation Tools ......................................................................................................................................................... 5
Flat Panel Mount Location ......................................................................................................................................... 6
Mounting Bracket Positioning .................................................................................................................................... 6
Griplates™ ..................................................................................................................................................................... 9
Wood Stud Location .................................................................................................................................................. 10
Marking The Mounting Points ................................................................................................................................. 11
Securing The Wall Plate To The Wooden Studs ..................................................................................................... 12
Securing The Wall Plate To A Concrete Wall .......................................................................................................... 13
Securing The Flat Panel To The Wall Mount .......................................................................................................... 14
Lateral Shift Adjustment ........................................................................................................................................... 14
Security Cable ............................................................................................................................................................. 15
Technical Specifications ............................................................................................................................................ 16
Warranty ..................................................................................................................................................................... 17
Customer Support ...................................................................................................................................................... 17
Notes ........................................................................................................................................................................... 18
SFM1
Page 4 Installation Manual
Warning Statements
WARNING: THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE (5) TIMES THE
WEIGHT OF THE DISPLAY. IF NOT, THE WALL STRUCTURE MUST BE REINFORCED. PROPER
INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE
INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT
IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.
WARNING: SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF
THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION
PROCEDURE TO PREVENT PERSONAL INJURY.
WARNING: PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS
SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS
MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE
INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE
REFERENCE.
Indicates that the power plug is to be
disconnected from the power outlet.
Contact Sony Electronics with any
questions.
Safety precautions must be taken at all
times.
Warning and Caution statements.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to
do so could result in damage to the display and/or damage to the mounting surface.
Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct
heat energy. Failure to do so may result in damage to the display and could increase the risk of
fire.
At least two qualified people should perform the installation procedure. Injury and/or damage can
result from dropping or mishandling the plasma display.
Recommended mounting surfaces: wooden studs and solid-flat concrete. If the mount is to be
installed on any surface other than wooden studs, use suitable hardware (which is commercially
available).
SFM1
Installation Manual Page 5
Parts List
NOTE: This wall mount is shipped with all proper installation hardware and components. Make sure that
none of these parts are missing and/or damaged before beginning installation. If there are parts
missing and/or damaged, please stop the installation and contact Sony Electronics (800)222-7669.
Wall Plate (1ea)
Mounting
Brackets (Left and
Right)
Griplates™
(4ea)
5/16” x 3” Lag
Bolts (4ea)
(Wooden studs
only)
M6 x 12mm
(4ea)
5/16” Flat
Washers-Metal
(8ea)
Flat Panel List
SONY
Fits All Sony Professional plasma and Large LCD Panels.
Installation Tools
Phillips Head Screw Driver Portable Drill ¼” Drill Bit Level
Soft Material/ Blanket Pencil Tape Measure Wrench with ½” Drive Socket
SFM1
Page 6 Installation Manual
Flat Panel Mount Location
WARNING: INVERT THE FLAT PANEL PLACE IT ON A SOFT, FLAT SUFRACE TO PREVENT DAMAGE TO
THE FLAT PANEL. USE A BLANKET, FOAM, ETC. FAILURE TO DO SO WILL RESULT IN
DAMAGING THE FLAT PANEL. DO NOT LAY THE FLAT PANEL ON THE FLOOR WITHOUT ANY
PROTECTION TO THE GLASS. THE FLAT PANEL IS HEAVY AND FRAGILE. AT LEAST (2)
QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS
PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE
TO THE FLAT PANEL.
1. Once the flat panel is inverted, use a measuring tape to find the center of your flat panel measuring
from outside to outside of the chassis (Figure 1).
2. Using a pencil lightly mark the center of your flat panel (Figure 2).
C
L
L
C
Figure 1. Flat Panel Mount Location Figure 2. Marking the Mount
Mounting Bracket Positioning
1. Install the nylon spacers to the mounting points on the flat panel (Figure 3)
2. Lay the left and right mounting brackets (stamped arrows facing out) (Figure 4).
To
p
of Flat Panel
I
nverted Flat
P
anel
M
easurin
g
Ta
p
e
B
ottom of Flat
P
anel
Inverted Flat
Panel
M
ark the Center
of the Flat Panel
SFM1
Installation Manual Page 7
Figure 3. Mounting Bracket Positioning
Figure 4. Mounting Bracket Installation
N
ylon Spacers, If
A
pp
licable
(
See Chart
)
Inverted Flat Panel
Center Mark
M
ounting Brackets
B
ottom of Flat Panel
Arrows Facing OUT
SFM1
Page 8 Installation Manual
NOTE: The mounting guides are designed with a center viewing guide on the side of them. There will be
a “notch” cut on the side of the bracket (Figure 5).
Figure 5. Locating the Center of the Flat Panel
3. Match the center of the viewing guide with the centerline you marked in Step 1 (Figure 6).
C
L
Figure 6. Adjusting the Mounting Brackets
Align the Mounting
B
rackets
B
ottom of the Flat
Panel
M
ounting Bracket
B
ottom of Flat
P
anel
Center of Viewing
Guide
Center of Flat
Panel
SFM1
Installation Manual Page 9
Griplates™
1. The Griplates™ have M4, M5, M6 and M8 hole patterns to fit the hardware that the flat panel requires.
Examples: If your display uses M8 x 20 Phillips head screws. Use the M8 mounting points (Figure 7).
Figure 7. Griplates™ Orientation
2. Once the mounting brackets are aligned, secure the Griplate™ to the flat panel.
NOTE: The dimples of the top plates have to be facing up and the bottom dimples must be facing down.
Use (1) Griplate™ per mounting point (Figure 8).
NOTE: Leave a ¾” gap on both mounting brackets as shown on this diagram.
CAUTION: Do not over tighten the mounting hardware.
DIMPLES
FACING UP
3/4"
DIMPLES
FACING UP
DIMPLES
FACING DOWN
DIMPLES
FACING DOWN
Figure 8. Griplate™ Attachment
Dimples
M
8
M
6
M
5
M
4
Phillips Screw Driver
B
ottom Flat Panel
SFM1
Page 10 Installation Manual
Wood Stud Location
1. Using a stud finder, locate the 16” or 24” stud centers behind the wall.
2. Once found, make a pencil mark on the center of the wood studs (Figure 9).
NOTE: The wall plates have three 16” and 12” mounting slot positions.
16"
Figure 9. Locating the Wooden Stud
3. Measure from the floor to the desired viewing height and mark the wall (Figure 10).
NOTE: This marking will reference the center of your flat panel display once mounted to the wall.
16"
Figure 130. Measuring the Height
W
ooden Studs
b
ehind the Wall
Structure
W
ooden Studs
Stud Finder
M
easure and
M
ark the Desired
V
iewing Height
on the Wall
Autres manuels pour SFM1
1
Table des matières
Autres manuels Sony Support et étagère
Sony
Sony SU-B553S Manuel utilisateur
Sony
Sony SUFL71M - SU - Stand Manuel utilisateur
Sony
Sony SU-RS52U Manuel utilisateur
Sony
Sony RHT-G15 Manuel utilisateur
Sony
Sony SU-RS12X - Stand For Rear Projection TV Manuel utilisateur
Sony
Sony SU-GW3 Guide de l'utilisateur
Sony
Sony BKM-38H Manuel utilisateur
Sony
Sony RHT-G5 Manuel utilisateur
Sony
Sony SU-557 Manuel utilisateur
Sony
Sony SU-WL450 Manuel de service
Sony
Sony Operating Instructions SU-EF41 Manuel utilisateur
Sony
Sony CH-SMAC400 Manuel utilisateur
Sony
Sony SU-36HX1 Manuel utilisateur
Sony
Sony SU-WL450 Manuel de service
Sony
Sony ACY-RK2 Manuel utilisateur
Sony
Sony BKM-30E20 Manuel utilisateur
Sony
Sony SU-GW11 Manuel utilisateur
Sony
Sony SU-34XBR3 Manuel utilisateur
Sony
Sony SU-B463S Manuel utilisateur
Sony
Sony ACY-RK2 Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
