Sony VPD-LE100 Manuel utilisateur

BID SPECIFICATION

FOR

DLP PROJECTORS

MODEL NUMBER

VPD-LE100

INSTRUCTIONS:

REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND

PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN

CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING

THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF

PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE

INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

SONY ELECTRONICS INC.

DISPLAY PRODUCTS GROUP

1 SONY DRIVE, MD S3D9

PARK RIDGE, NJ 07656

TEL# (201)-930-1000, FAX# (201)-358-4303

1.0 General Information

The purpose of this information is to provide the specification for a product whose

primary purpose is the reproduction of video and / or computer graphics

information for one or more viewers.

This reproduction of this information is to be accomplished via a projection DLP

display. This document provides the minimum specifications for this device.

The performance comparison of displays is not only technical in nature, but is

also subjective to the user, when viewed in the final display environment. It is

recommended that devices meeting the requirements of this specification be

compared in the user’s application and environment, if possible.

2.0 Description

This product shall be classified as a large screen projection DLP display, or

graphics projector. This device shall be directly compatible with both video and

computer graphics sources, without the use of external devices to provide this

compatibility.

This device shall employ the use of three 1.1-inch Texas Instruments DMD chips

for optimum display of high-resolution sources.

This device shall employ a highly mobile design that can easily be ceiling

mounted using an optional bracket from the device manufacturer or from third

parties or desktop configured for projection booth use. Handles shall be an

integral part of the device for simplified transport. Stacking of multiple devices

shall be possible with the use of an optional stacker from a third party

manufacturer.

3.0 Source Compatibility / Suitability for Application

This device shall be directly compatible with the following sources:

NTSC Video (Composite and Y/C)

PAL Video (Composite and Y/C)

PAL-M Video (Composite and Y/C)

SECAM Video (Composite)

Modified NTSC 4.43 (Composite)

Component Video (50 and 60 Hz)

RGB Video (50 and 60 Hz)

FILM / 60P

480P (60Hz)

575P (50Hz)

720P (60Hz)

1035I (60 Hz)

1080I (50 and 60 Hz)

1080P (24 PsF)

VGA Computer Graphics (Modes 1, 2 and 3, 60 - 85 Hz)

VESA 800x600 Computer Graphics (56 - 85 Hz)

VESA 1024 x 768 Computer Graphics (43 – 85 Hz)

VESA 1152 x 864 Computer Graphics (70 – 75 Hz)

SUN 1152 x 900 Computer Graphics (65 – 76 Hz)

VESA 1280 x 1024 Computer Graphics (43 – 85 Hz)

VESA 1600 x 1200 Computer Graphics (60 - 75 Hz)

Mac 13” Computer Graphics

Mac 16” Computer Graphics

Mac 21” Computer Graphics

This device shall accept multi-scanning sources, with scan frequencies ranging

from 15 to 100 kHz Horizontally, and 40 to 120 Hz Vertically.

This device shall employ the use of a high performance interpolation circuit,

which regenerates a high-resolution sampling of the original signal by referring to

memorized waveform patterns to enhance image performance. This device shall

also employ the use of a 3-dimensional comb filter and 3-line filter for maximum

chrominance and luminance separation and to minimize dot interference and

cross color when viewing NTSC video sources.

This device shall have the ability to store and recall multiple memory presets for

various video and computer configurations.

4.0 User Interface / Controllability Information

Control of this device shall be accomplished through one of the following

methods:

Backlit, projector control panel

Wired / Wireless backlit projector remote control

Serial control jack for control by external control systems

Advanced serial control jack for control by external control systems

Advanced serial control jack for control by external signal switchers

All of these control methods shall be standard to the device, or available at an

additional charge if considered an optional accessory.

The projector control panel shall be recessed into the cabinet, and shall employ

the use of a backlight that activates when any button is pressed. The backlight

shall have a timeout function. The control panel shall activate multi-language on-

screen menus, which navigate the operator through setup and configuration of

the device. The device shall be addressable for control over multiple devices

from a single remote control.

The wired / wireless backlit projector remote control shall operate in the same

fashion as the projector control panel, and shall accommodate infrared wireless

operation, or operation via a standard mini-plug cable. An infrared extender shall

be available from the device manufacturer for operation of the device wirelessly

in a rear-screen or cabinet environment.

The serial control jack shall employ the use of a standardized device control

protocol that is commonly accepted and understood by control systems

manufacturers. This control jack shall accept unidirectional serial commands that

provide full control over the device.

The advanced serial control jack shall employ the use of a standardized device

control protocol that is commonly accepted and understood by control systems

manufacturers. This control jack shall accept and transmit bi-directional serial

commands that provide full control over the device, and provide

acknowledgement to the control system of the received command.

The advanced serial control jack for control by external signal switchers shall

employ the use of a standardized device control protocol that is commonly

accepted and understood by control and signal switching manufacturers, and

shall operate at distances greater than 1000 feet without regeneration from an

external device. This control jack shall accept and transmit bi-directional serial

commands that provide full control over the device, and provide

acknowledgement to the control system of the received command.

The following device functions shall be available for control:

Power On / off

Input Selection

Brightness / Contrast

Video Decoder Functions

Audio Volume

Memory Recall Functions

White Balance

Gain / Bias Control

Image Sizing

Image Positioning

Lens Power Zoom

Lens Power Shift

Lens Power Focus

5.0 Performance Specifications

This device shall employ the use of 3 Texas Instruments high-resolution 1.1-inch

DMD chips. This device shall provide a light output of 10,000 ANSI lumens, when

measured using a 1280 x 1024 native resolution signal.

This device shall include a standard power zoom / focus / shift lens, and other

lenses shall be available as options for a variety of short-throw and long-throw

applications.

This device shall have a minimum RGB resolution of 1280 by 1024 pixels and a

minimum video resolution of 600 TV lines.

An automatic dot-phase adjustment technology shall be employed to optimize the

display to the input source without user intervention.

This device shall employ the use of a flat-spectrum xenon lamp system, providing

for optimum balance between the red, green and blue color spectrum.

This device shall employ the use of a 2-3 pulldown technique for accurate and

detailed reproduction of film originating source material.

A 13-bit signal processing shall be employed for accurate, smooth reproduction

of color and grayscale images.

6.0 Dimensional Information

This device shall have maximum cabinet dimensions of 13.75 inches high by

28.63 inches wide and 37.38 inches deep.

This device shall not weigh more than 209 pounds.

7.0 Connectivity Information

This device shall provide for connection of 4 source devices simultaneously,

without employing the use of an external switching device. One of these

connections shall be a standard input on the device, with 3 available for custom

configuration. The standard connection shall include the following:

RGB Computer / Component Video / HDTV Video (Sync on Green, Composite,

or Separate Sync) on BNC Connectors

Optional Modules shall allow for the following connections:

RGB Computer / Component Video (Sync on Green, Composite, or Separate

Sync) on BNC Connectors

Audio L/R on RCA (Phono) Connectors

RGB Computer / Component Video (Sync on Green, Composite, or Separate

Sync) on a 9 pin (D9) Connector

Audio L/R on RCA (Phono) Connectors

RGB Computer / Component Video (Sync on Green, Composite, or Separate

Sync) on a VGA (HD15) Connector with loop-through

Audio L/R on RCA (Phono) Connectors

Component Serial Digital Video on a BNC Connector with loop-through

Composite Video on a BNC Connector or Y/C Video on a 4 Pin DIN Connector,

both with loop-through

Audio L/R on RCA (Phono) Connectors

High Definition Serial Digital Video on a BNC Connector with loop-through

These optional modules shall be user-installable, without access to the inside of

the device, and shall also be installable in an optional external switching device

available from the device manufacturer.

This device shall include a 12V power output for providing power to external

devices.

8.0 Power Requirements

This device shall accept power from 220 to 240 VAC at either 50 or 60 Hz.

This device shall consume no more than 2800 watts.

This device shall emit no more than 9556 BTU.

Power to this device shall be supplied via a detachable standard power cord that

is readily available for replacement from local suppliers.

9.0 Safety Compliance Information

This device shall be fully compliant with the following standards:

UL 1950

cUL 950

FCC Class A

IC Class A

VCCI Class A

JEIDA

EN60 950

C-Tick

10.0 Warranty Information

This device shall carry a 2-year manufacturer’s warranty, with a 90-day lamp warranty.

Authorized servicing dealers of the devices’ manufacturer shall perform warranty

service.

Autres manuels pour VPD-LE100

Table des matières

Autres manuels Sony Projecteur

Sony

Sony VPL-VW5000 Manuel de service

Sony

Sony Cineza VPL-HS2 Manuel du propriétaire

Sony

Sony BRIGHTERA VPL-FH30 Manuel utilisateur

Sony

Sony Cineza VPL-HS60 Manuel utilisateur

Sony

Sony VPL-FH500L Manuel utilisateur

Sony

Sony VPLHS3 - Cineza Digital Home Entertainment LCD Front... Guide de démarrage rapide

Sony

Sony VPL-GTZ280 Manuel utilisateur

Sony

Sony VPLEW225 Manuel utilisateur

Sony

Sony KP-53V45 Manuel utilisateur

Sony

Sony VPL-EX3 Manuel utilisateur

Sony

Sony CPJ-D500 - SVGA LCD Projector Manuel utilisateur

Sony

Sony VPLVW100 - Full HD Widescreen Projector Guide de l'utilisateur

Sony

Sony VPL-DX147 Manuel utilisateur

Sony

Sony VPL-HW30ES Manuel utilisateur

Sony

Sony VPL-CS4 - Compact Lcd Projector Manuel utilisateur

Sony

Sony VPL VW50 - SXRD - Projector Manuel utilisateur

Sony

Sony Xperia Touch G1109 Manuel utilisateur

Sony

Sony VPL-VW500ES Manuel utilisateur

Sony

Sony KPR-53EX30 Manuel utilisateur

Sony

Sony VPL-EW130 Manuel utilisateur

Sony

Sony CPJ-A300E Manuel utilisateur

Sony

Sony VPL-FX51 Manuel utilisateur

Sony

Sony VPL-BW120S Manuel utilisateur

Sony

Sony VPL-ES3 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

Epson

Epson PowerLite 810p Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur