Sony Ericsson HBH-60 Manuel utilisateur

NotforCommercialUse

Contents

English.............................................3

Deutsch .........................................17

Español .........................................33

Français.........................................49

Italiano...........................................65

....................................81

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

଼ᄏᒦᆪ

Notfor CommercialUse

English

Introduction 4

Headset overview 5

Using the headset 9

Troubleshooting 12

Additional information 14

Declaration of conformity 95

Sony Ericsson HBH-60

First edition (July 2002)

This manual is published by Sony Ericsson Mobile

Communications AB, without any warranty. Improvements and

changes to this manual necessitated by typographical errors,

inaccuracies of current information, or improvements to programs

and/or equipment, may be made by Sony Ericsson Mobile

Communications AB at any time and without notice. Such changes

will, however, be incorporated into new editions of this manual.

©Sony Ericsson Mobile Communications AB, 2002

Publication number: LZT 108 5897/1 R1A

Some of the services in this manual are not supported by all

networks. This also applies to the GSM International Emergency

Number 112.

Contact your network operator or service provider if you are

in doubt whether you can use a particular service or not.

BLUETOOTH is a trademark of the Bluetooth SIG, Inc. (Special

Interest Group). The Bluetooth trademarks are owned by

Bluetooth SIG, Inc. USA.

Notfor CommercialUse

4 Introduction

Introduction

The Bluetooth™ headset HBH-60

is a portable headset solution

based on Bluetooth wireless

technology.

See “Guidelines for safe and efficient use” on

page 14 and “Limited Warranty” on page 15 before

using your headset.

What is Bluetooth wireless technology?

The Bluetooth wireless technology makes it possible

to connect any compatible portable and stationary

communications device without using cables. The

technology is based on a radio link that offers fast and

reliable transmission of voice and data information.

It does not require a line-of-sight connection in order

to establish communication. Bluetooth wireless

technology uses a globally available frequency range

intended to ensure communication compatibility

worldwide.

How can I use my headset?

You can connect your HBH-60 headset to your mobile

phone or PC – or any device with Bluetooth wireless

technology that supports the Headset profile or the

Handsfree profile. This user’s guide focuses on how

to use the headset with your mobile phone. You need

to have a phone with built-in Bluetooth capability, or

a phone with a Bluetooth adapter connected to it.

When the headset is connected to your mobile phone,

you can use voice control to make calls (if your phone

supports this function). The phone can be tucked away

in your pocket or in a bag. You can handle incoming

and outgoing calls, and adjust the volume, using the

buttons on the headset.

Notfor CommercialUse

Headset overview 5

Headset overview

Front Back

Volume and ring signal down

Volume and ring signal up

Call handling button and

indicator light

Charging

connector

Microphone

Speaker

Ear hook

Notfor CommercialUse

6 Headset overview

Getting started

Before you can use your headset, you must first:

• Charge the headset battery, using an appropriate

Sony Ericsson charger.

• Pair the headset with a device, for example, a mobile

phone.

Compatible Sony Ericsson or Ericsson chargers:

• Travel Charger CTR-10

• Standard Charger CST-13

• Cigarette Lighter Adapter CLA-11

Charging

The headset comes with a built-in rechargeable battery.

We recommend that you charge the battery until the

headset indicator light turns green before using the

headset for the first time. During charging, the

indicator light shows a steady red light if the headset

is turned off, and flashes red if the headset is on.

When the battery is fully charged, the indicator

shows a steady green light if the headset is off,

or a flashing green light if the headset is on.

To charge the battery

1. Connect the charger to the headset and to the mains.

The flash symbol on the charger plug must face

upwards.

2. It takes 1 to 1.5 hours to fully recharge the battery.

3. Tilt the charger plug upwards to remove it when

disconnecting the charger.

Notfor CommercialUse

Headset overview 7

Pairing

To turn the headset on

• Press and hold the call handling button until you

hear a short low tone followed by a short high tone.

The headset indicator light flashes green.

Note: The first time the headset is turned on, it might

automatically be ready for pairing.

To turn the headset off

• Press and hold the call handling button until you

hear a short high tone followed by a short low tone.

The headset indicator light switches off.

Pairing the headset with a phone

You pair the headset with the phone by adding it to

a list of paired devices in the phone. The two devices

then recognize each other when they connect. Once

you have paired your headset with the phone, you do

not need to pair it again until you want to use it with

another device.

To pair the headset with a Sony Ericsson or

Ericsson phone

1. With the headset turned off, press and hold the call

handling button for up to 10 seconds until the

indicator light on the headset flashes green and red.

2. In the phone, scroll to Extras or Connect, YES,

Bluetooth, YES, Paired devices, YES, Add device, YES,

Phone initiates, YES.

3. A list of device types that you can pair with your phone

appears. Scroll to Handsfree or Headset, YES. Make

sure that the headset is within 1 m (3 ft) of the phone.

4. HBH-60 appears in the display. Press YES.

Up to

1 m

Notfor CommercialUse

8 Headset overview

5. Enter the headset passkey (0000), YES.

The phone pairing procedure starts.

6. You may now replace the given headset name with

a personal name tag, YES. When pairing has been

completed, the headset indicator light flashes green.

To pair the headset with another make of phone

1. Prepare your phone according to the phone’s user

documentation on pairing.

2. Press the call handling button for up to 10 seconds

until the indicator light on the headset flashes green

and red. The headset is now ready for pairing.

3. Continue according to the instructions in the phone’s

user documentation. The headset passkey is 0000.

Putting on the headset

1. Make sure the ear hook forms an angle of 90°.

2. Place the ear hook behind your ear.

3. Make sure the microphone is pointing towards your

mouth.

4. Make sure the speaker is positioned as shown in the

picture.

Notfor CommercialUse

Using the headset 9

To adjust the ear hook for left-ear use: Using the headset

Once you have paired the headset with your phone,

you can make and receive calls using the headset as

long as it is turned on and within range of the phone

– up to 10 m (30 ft) outdoors or up to 5 m (15 ft)

indoors with no solid objects in between. For best

performance, use the headset and phone in the same

room.

Optimal

performance

Limited

performance

Up to 5 m

Notfor CommercialUse

10 Using the headset

If your phone supports voice dialling and it is

activated, you can use this feature with the headset.

The following instructions cover the use of the

headset with a Sony Ericsson or Ericsson phone with

built-in Bluetooth capability.

Note: Always make sure the Bluetooth operation mode

in the phone is on when using the Bluetooth headset.

Making and answering calls

Phone functionality is still available when the headset

is connected. You can make and answer calls using the

buttons on the headset, or using the keys on the phone,

as usual.

To make a call using voice dialling

1. Make sure the phone and the headset are on and within

range of each other. Press the call handling button.

2. It may take a while to set up the connection between

the phone and the headset. During this time, you might

hear a repeated tone in the headset. After the beep,

voice dial as you normally would.

3. End the call by pressing the call handling button.

To answer a call using the call handling button

1. When the headset rings, press the call handling

button.

Note: If the phone rings first, wait until the headset

rings, then press the call handling button.

2. End the call by pressing the call handling button.

To answer a second call

• You have to use the phone keypad to answer and

handle a second call, but you can still use the headset

for talking and listening. You cannot use the headset

buttons during a second call. Refer to the phone's user

documentation on how to handle more than one call

simultaneously.

To reject a call

• When the headset rings, press and hold the call

handling button until you hear a long beep.

Using voice commands

Voice commands are especially useful when you are

using the headset. Examples of voice commands are

dialling, re-dialling, answering and rejecting calls.

Table des matières

Langues :

Autres manuels Sony Ericsson casque

Sony Ericsson

Sony Ericsson HBH-DS980 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV720 Manuel utilisateur

Sony Ericsson

Sony Ericsson VH110 Manuel de service

Sony Ericsson

Sony Ericsson MW600 Manuel de service

Sony Ericsson

Sony Ericsson HBH-IV835 Manuel utilisateur

Sony Ericsson

Sony Ericsson VH700 Manuel de service

Sony Ericsson

Sony Ericsson Live Sound Manuel de service

Sony Ericsson

Sony Ericsson Akono HBH-660 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-IS800 Manuel utilisateur

Sony Ericsson

Sony Ericsson Akono HBH-608 Manuel utilisateur

Sony Ericsson

Sony Ericsson HCA-20 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV712 Manuel utilisateur

Sony Ericsson

Sony Ericsson MW600 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-DS200 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-IV835 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-10 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV710 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV702 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV705 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV700 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-DS970 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-PV740 Manuel utilisateur

Sony Ericsson

Sony Ericsson HBH-65 Manuel utilisateur

Sony Ericsson

Sony Ericsson VH300 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur