SOMFY Pergola Manuel d'instructions

Pergola Tilt RTS Control Box

Connection Quick Start Guide

Switch 1

ON Drive with coder sensor

OFF Drive without coder sensor

Switch 2

(only if switch 1 is set to ON)

ON Activates synchronization S1 and S2

OFF Deactivates synchronization S1 and S2

Switch 3

ON 5.5 A max. per output

OFF 3 A max. per output

Switch 4

ON Activates the temperature sensor

OFF Deactivates the temperature sensor

Switch 5

ON Closing in the event of wind

OFF Opening in the event of wind

Power Supply Input

-24 Vdc power supply input (SELV)

Drive output 1

Blue

-24 Vdc - 3A/5.5A drive: Maximum

current according to switch 3

Brown

Drive output 2

Blue

-24 Vdc - 3A/5.5A drive: Maximum

current according to switch 3

Brown

Rain Sensor

Contact Dry contact input

Common

-Power supply output:

24 Vdc/- 300 mA

DESCRIPTION & CONNECTIONS

External

antenna

PROG

button.

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

OFF

Switch 1

Switch 2

Switch 3

Switch 4

Switch 5

O PQR

Output

Power

supply

Rain

sensor

Drive

output S2

Drive

output S1

Drive without

encoder

FEDC

Power

supply

input

External antenna

Signal Conductor

GND Shielding braid

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

Status

The LED ﬂashes every 4 seconds: Circuit board waiting.

The LED ﬂashes rapidly: Command in progress.

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

Fault

The red LED light remains illuminated for 5 seconds: Current consumption threshold has

been exceeded or circuit board has heated up too much during an output command.

The red LED ﬂashes: drive synchronisation fault.

The orange LED remains illuminated for several seconds: Backing-up the memory.

The orange LED ﬂashes rapidly: Movement of a drive not permitted by a sensor action.

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

Wind (1)

The orange LED remains illuminated: Wind

threshold has been exceeded.

The orange LED ﬂashes rapidly: protection still

in progress for 15 minutes aer the threshold

last being exceeded.

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

Temperature (1) (2)

The orange LED remains illuminated: the ice threshold has been

exceeded.

The orange LED ﬂashes rapidly: protection still in progress for 15

minutes aer the latest threshold is exceeded.

DESCRIPTIONS OF CIRCUIT BOARD INDICATOR LIGHTS

Rain (1) (2)

The orange LED remains illuminated: The rain threshold has been

exceeded.

The orange LED ﬂashes rapidly: protection still in progress for 15

minutes aer the threshold last being exceeded.

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

BEFORE YOU BEGIN: Power must be cut before wiring or making any wiring changes

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

Status

Fault

Wind

Rain

Temperature

Pergola Tilt RTS Control Box

Programming Quick Reference Guide

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

1. INITIATE PROGRAMMING

2. CHECK THE DIRECTION OF OPERATION

3. SET THE END LIMITS 4. SNOW/ICE POSITION AND VALIDATION

5. PAIRING THE REMOTE CONTROL

Repeat steps from 1.2 through step 4.

1.1 Press & hold the PROG button

on the circuit board until both S1 and

S2 LEDs ﬂash. The motor jogs.

2.1 Press the UP button to conﬁrm the pergola opens.

Brieﬂy press UP and DOWN at the

same time to initiate the end limit

(self-learning) process.

Do not interrupt the movement:

the drive will automatically

search for its end limits.

4.1 Use the UP or DOWN buttons to run the motor to the desired position for

ice/snow.

4.2 Press & hold the MY button until the motor jogs to conﬁrm the settings.

Brieﬂy press the PROGRAMMING

button on the back of the

transmitter.

The motor jogs.

NOTE: On a multi-channel RTS control,

select a diﬀerent channel on step 1.3

ADD OR DELETE A CONTROL OR SENSOR

The procedure to delete a RTS control or sensor is the same.

The direction

of rotation is

correct

If the pergola closes, the direction of rotation is incorrect.

2.2 Press & hold MY button until the motor jogs.

The rotation direction has been modiﬁed.

1.3 On a multi-channel RTS

control, select the desired channel.

1.4 Press brieﬂy UP and DOWN

simultaneously. The motor jogs.

1.2 Brieﬂy press the PROG button to select motor S1

or S2 to program. S1 or S2 LED will light to conﬁrm the

motor to be programmed.

6. PROGRAMMING MOTOR 2

a) Press & hold the PROG button on

the back of Control 1 until the pergola

jogs.

b) Brieﬂy press the PROG button on

the back of Control 2 until the pergola

jogs.

CONTROL 1: Previously

programmed control

CONTROL 2: Second control to

be added or deleted.

BEFORE YOU BEGIN:

Check the motor power plug to ensure it is fully inserted and the retainer caps screws are in ﬂush.

Clearing the control

box’s memory

completely:

RESETTING THE CONTROL

BOX TO FACTORY MODE

OUTPUT Vdc

POWER SUPPLY

OUTPUT Vdc

> 7 s.

Press the PROG button on the circuit

board for more than 7 seconds until all

the indicator lights on the circuit board

light up.

Table des matières

Autres manuels SOMFY Unité de contrôle

SOMFY

SOMFY Control Box 3S io Manuel utilisateur

SOMFY

SOMFY animeo IB+ 4 Zone Touch Building Controller Manuel utilisateur

SOMFY

SOMFY animeo 1860114 Manuel utilisateur

SOMFY

SOMFY Ondeis 24 V DC Manuel utilisateur

SOMFY

SOMFY Control Box 3S io Manuel utilisateur

SOMFY

SOMFY animeo Manuel utilisateur

SOMFY

SOMFY inteo CHRONIS UNO Manuel utilisateur

SOMFY

SOMFY EOLIS Inteo Wind Control Manuel utilisateur

SOMFY

SOMFY SMOOVE LIGHTING io Manuel utilisateur

SOMFY

SOMFY animeo IB + Manuel utilisateur

SOMFY

SOMFY N1841014 V2 Manuel utilisateur

SOMFY

SOMFY CB 230 RTS Manuel utilisateur

SOMFY

SOMFY Control Box 3S io Manuel utilisateur

SOMFY

SOMFY Control Box 3S io Manuel utilisateur

SOMFY

SOMFY 1810880 Manuel utilisateur

SOMFY

SOMFY CD 1 x 4 P6 Manuel utilisateur

SOMFY

SOMFY animeo LON 1860239 Manuel utilisateur

SOMFY

SOMFY EOLIS RECEIVER Manuel utilisateur

SOMFY

SOMFY CONTROL BOX 3S RTS Manuel utilisateur

SOMFY

SOMFY CB 230 RTS Manuel utilisateur

SOMFY

SOMFY inteo CENTRALIS UNO IB VB Manuel utilisateur

SOMFY

SOMFY CONTROL BOX 3S RTS Manuel utilisateur

SOMFY

SOMFY SLIDYMOOVE Manuel utilisateur

SOMFY

SOMFY P.TILT RTS M+L Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur