SNBC BTP-R180II Manuel du propriétaire

PROGRAMMING MANUAL

Receipt Printer

BTP-R180II

Shandong New Beiyang Information Technology Co., Ltd.

CONFIDENTIAL

BTP-R180II Programming Manual

- 1 -

REVISION HISTORY

Date Version Description Drafted by

2014-3-01 V100 Primary version Feng Bin

BTP-R180II Programming Manual

- 2 -

Declaration

Information in this document is subject to change without notice. SHANDONG NEW BEIYANG

INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to

improve products as new technology, components, software, and firmware become available. If users

need further data about this products or have any doubt about safety issues that might arise from

using it, please feel free to contact SNBC or your local distributor.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose without the express written permission of SNBC.

Printed in China

Trademarks

Our registered trademarks are and

Address: No.126 Kunlun Rd, Weihai, Shandong, China.

Order Tel: +86-631-5671111

Technical support: +86-631-5675888 800861368

Fax: +86-631-5680499 5675111

PC: 264209

Website: www.newbeiyang.com

E-mail: [email protected]

BTP-R180II Programming Manual

- 3 -

Contents

1 Overview .......................................................................................................................................... - 1 -

1.1 Commands classification ..................................................................................................................... - 1 -

1.2 Key terms.............................................................................................................................................- 1 -

1.3 Command format ................................................................................................................................. - 1 -

2 Command Description...................................................................................................................... - 3 -

2.1 Print command.....................................................................................................................................- 3 -

LF ........................................................................................................................................................... - 3 -

FF........................................................................................................................................................... - 3 -

CR .......................................................................................................................................................... - 3 -

ESC FF .................................................................................................................................................. - 3 -

ESC J n .................................................................................................................................................. - 4 -

ESC d n.................................................................................................................................................. - 4 -

2.2 Location command............................................................................................................................... - 5 -

HT...........................................................................................................................................................- 5 -

ESC $ nL nH .......................................................................................................................................... - 6 -

ESC D n1...nk NUL ................................................................................................................................ - 6 -

ESC T n.................................................................................................................................................. - 7 -

ESC W xL xH yL yH dxL dxH dyL dyH .................................................................................................. - 8 -

ESC \ nL nH .........................................................................................................................................- 10 -

ESC a n................................................................................................................................................ - 11 -

GS $ nL nH ..........................................................................................................................................- 12 -

GS L nL nH ..........................................................................................................................................- 12 -

GS P x y ............................................................................................................................................... - 13 -

GS W nL nH .........................................................................................................................................- 14 -

GS \ nL nH ........................................................................................................................................... - 14 -

2.3 Character command .......................................................................................................................... - 15 -

CAN...................................................................................................................................................... - 15 -

ESC SP n ............................................................................................................................................. - 16 -

ESC ! n................................................................................................................................................. - 17 -

BTP-R180II Programming Manual

- 4 -

ESC % n............................................................................................................................................... - 18 -

ESC & y c1 c2 [x1 d1...d(y ×x1)]...[xk d1...d(y ×xk)] .......................................................................... - 19 -

ESC –n ................................................................................................................................................- 20 -

ESC ? n................................................................................................................................................ - 21 -

ESC E n ............................................................................................................................................... - 21 -

ESC G n ............................................................................................................................................... - 22 -

ESC M n............................................................................................................................................... - 22 -

ESC R n ............................................................................................................................................... - 22 -

ESC V n ............................................................................................................................................... - 23 -

ESC t n................................................................................................................................................. - 23 -

ESC { n................................................................................................................................................. - 25 -

GS ! n ................................................................................................................................................... - 26 -

GS B n.................................................................................................................................................. - 27 -

FS ! n.................................................................................................................................................... - 27 -

FS & ..................................................................................................................................................... - 28 -

FS - n ................................................................................................................................................... - 28 -

FS ........................................................................................................................................................ - 29 -

FS 2 c1 c2 d1...dk ................................................................................................................................- 29 -

FS C n .................................................................................................................................................. - 30 -

FS S n1 n2 ........................................................................................................................................... - 30 -

FS W n ................................................................................................................................................. - 31 -

2.4 Bitmap Command .............................................................................................................................. - 31 -

ESC * m nL nH d1... dk........................................................................................................................- 31 -

GS # n .................................................................................................................................................. - 33 -

GS * x y d1...d(x ×y ×8)...................................................................................................................... - 33 -

GS / m .................................................................................................................................................. - 34 -

GS v 0 m xL xH yL yH d1....dk............................................................................................................. - 35 -

FS p n m............................................................................................................................................... - 35 -

FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n........................................................................ - 36 -

2.5 Auto bitmap printing command .......................................................................................................... - 38 -

FS ( E pL pH fn m c d1 d2 d3(fn = 60)............................................................................................. - 38 -

BTP-R180II Programming Manual

- 5 -

FS ( E pL pH fn m c (fn = 61)........................................................................................................... - 39 -

FS ( E pL pH fn m kc1 kc2 a n(fn = 62) .........................................................................................- 39 -

FS ( E pL pH fn m kc1 kc2 a (fn = 63) ............................................................................................. - 40 -

FS ( E pL pH fn m a n(fn = 65) ........................................................................................................ - 41 -

2.6 Status command................................................................................................................................- 41 -

DLE EOT n...........................................................................................................................................- 41 -

GS a n .................................................................................................................................................. - 43 -

GS r n................................................................................................................................................... - 44 -

2.7 Barcode command............................................................................................................................. - 45 -

GS H n ................................................................................................................................................. - 45 -

GS f n ................................................................................................................................................... - 46 -

GS h n .................................................................................................................................................. - 46 -

①GS k m d1...dk NUL②GS k m n d1...dn...........................................................................................- 46 -

GS s n1 n2 n3 n4 n5 n6 n7 n8 ............................................................................................................. - 51 -

GS o n .................................................................................................................................................. - 53 -

GS p n .................................................................................................................................................. - 53 -

GS q n .................................................................................................................................................. - 54 -

GS w n ................................................................................................................................................. - 54 -

2.8 Bi-colour command ............................................................................................................................ - 54 -

ESC r n................................................................................................................................................. - 54 -

ESC C n ............................................................................................................................................... - 55 -

GS ( N pL pH fn a................................................................................................................................. - 55 -

2.9 Upside-down print command ............................................................................................................. - 55 -

GS ( z nL nH 0 S ..................................................................................................................................- 55 -

GS ( z nL nH 0 E ..................................................................................................................................- 57 -

2.10 water based print command ............................................................................................................ - 57 -

GS { w f n1 n2 n3 n4 n5 .......................................................................................................................- 57 -

GS { w n ............................................................................................................................................... - 58 -

2.11 Grayscale printing commannd ......................................................................................................... - 59 -

FS r n xl xh yl yh zl zh d1 d2 d3...d(k).................................................................................................. - 59 -

ESC c 6 n yl yh zl zh d1 d2 d3 ...d(k)...................................................................................................- 60 -

BTP-R180II Programming Manual

- 6 -

ESC c 7 n RAM .................................................................................................................................... - 61 -

2.12 Other commands ............................................................................................................................. - 62 -

ESC c : n .............................................................................................................................................. - 62 -

DLE ENQ n .......................................................................................................................................... - 62 -

DLE DC4 n m t ..................................................................................................................................... - 63 -

ESC 2................................................................................................................................................... - 63 -

ESC 3 n................................................................................................................................................ - 63 -

ESC = n................................................................................................................................................- 64 -

ESC @ ................................................................................................................................................. - 64 -

ESC L................................................................................................................................................... - 64 -

ESC S .................................................................................................................................................. - 65 -

ESC c 0 n ............................................................................................................................................. - 66 -

ESC c 3 n ............................................................................................................................................. - 66 -

ESC c 4 n ............................................................................................................................................. - 67 -

ESC c 5 n ............................................................................................................................................. - 67 -

ESC p m t1 t2.......................................................................................................................................- 67 -

GS ( A pL pH n m ................................................................................................................................. - 68 -

GS : ...................................................................................................................................................... - 68 -

①GS V m ②GS V m n ........................................................................................................................- 69 -

GS ^ r t m ............................................................................................................................................. - 69 -

3 Programming Process Guide ......................................................................................................... - 70 -

Appendix ........................................................................................................................................... - 71 -

Appendix A: Code128 Bar Code.............................................................................................................. - 71 -

Appendix B: Print mode and its change................................................................................................... - 75 -

Appendix C: Control Sequences.............................................................................................................. - 78 -

Confidential BTP-R180IIProgrammingManual

1 Overview

This manual classifies the printer commands into several kinds based on its functions, and also

describes the applications of relative commands in detail depending on its sorts. We hope that it is

helpful for programmers to get known of those commands.

1.1 Commands classification

This receipt printer commands are classified as below:

Print commands: used for printing and feeding paper;

Position commands: to control the print position;

Character commands: to set character property;

Bitmap commands: to download bitmap and print, including NV and RAM bitmap;

Status commands: used for printer status query;

Barcode commands: barcode print and property settings;

Other commands: used for periphery control, Macro-definition and initialization;

Command instruction refers to the detailed function of relative commands.

1.2 Key terms

Real-time commands – These commands are acted on immediately upon being received by the printer;

Print buffers – used to store figure data to be printed;

Page mode –Under this mode, the printer stores all data in a specified memory and thinks of this as a

virtual page. The page is printed when the printer receives print command either FF or ESC FF;

Standard mode – Standard mode is the default mode of printer, namely line mode. Under this mode, the

printer prints data and feeds paper upon print line buffer full (data is enough for one print line) or

receiving print command like LF;

HRI character – Barcode note character. Human Readable Interface;

NV – Non-volatile memory in which data stored does not loss when powered off. NV: Non-volatile;

RAM –Random Access Memory;

DPI – Print dots per inch (one inch equals to 25.4mm). It is used to identify the resolution of a printer.

Example, 203DPI means 203 print dots per inch. DPI: Dot Per Inch

Baseline – The standard position where character data in print buffers are stored. The figure shows the

position of ordinary characters in standard mode and page mode:

1.3 Command format

[Function] The name and function summary of commands;

Confidential BTP-R180IIProgrammingManual

- 2 -

[Format] The format of command data, such as ASCII, Hex and Decimal;

[Range] The value range of parameter in the command;

[Note] Explain the main features and application notices of commands;

[Default] The initial value used after the printer initialized;

[Relative] Other commands related to current command;

[Example] Example used for current or relative commands.

All command data in programming Demo use HEX. All normal font/characters are data.

There is no explanation for the data of command such as 42 43 which is data. The

font/character underlined and emphasized is a command such as 1B 40. All the data inside

parentheses after all commands in Demo is used to explain the meanings of this command.

The parentheses and data inside it is not the command to be transmitted to the printer.

Confidential BTP-R180IIProgrammingManual

- 3 -

2 Command Description

2.1 Print command

[Function] Print and line feed

[Format] ASCII LF

Hex 0A

Decimal 10

[Note] This command sets the print position to the beginning of the line.

[Reference] ESC 2, ESC 3

[Function] Print all data in the print buffers and return to the standard mode.

[Format] ASCII FF

Hex 0C

Decimal 12

[Notes] This command is valid only in page mode.

The buffer data is deleted after being printed.

The printer does not execute paper cutting.

This command sets the print position to the beginning of the line.

[Relative] ESC FF, ESC L, ESC S

[Function] When the command is enabled, it equals to LF; it is ignored when disabled,

[Format] ASCII CR

Hex 0D

Decimal 13

[Notes] Sets the print starting position to the beginning of the line.

This command is set according to the printer configuration.

[Relative] LF

ESC FF

[Function] Print data in page mode

[Format] ASCII ESC FF

Hex 1B 0C

Decimal 27 12

[Notes] This command is enabled only in page mode.

After printing, the printer does not clear the buffered data, setting values for ESC T and

ESC W, and the position for buffering character data.

[Relative] FF, ESC L, ESC S

Autres manuels pour BTP-R180II

Table des matières

Autres manuels SNBC Imprimante

SNBC

SNBC BTP-M300 Manuel du propriétaire

SNBC

SNBC BTP-R180II Manuel utilisateur

SNBC

SNBC BTP-R180II Manuel utilisateur

SNBC

SNBC BTP-R880NPI Manuel utilisateur

SNBC

SNBC BTP-R681 Manuel utilisateur

SNBC

SNBC BTP-R990 Manuel utilisateur

SNBC

SNBC BTP-M300 Manuel utilisateur

SNBC

SNBC BT-UC056III Manuel utilisateur

SNBC

SNBC BTP-R580 Manuel utilisateur

SNBC

SNBC BTP-R880NP Manuel du propriétaire

SNBC

SNBC BK-T6112 Manuel utilisateur

SNBC

SNBC BT-T080R Manuel utilisateur

SNBC

SNBC BTP-L580IIC Manuel utilisateur

SNBC

SNBC KIOSK Series Manuel utilisateur

SNBC

SNBC BT-UC156 Manuel utilisateur

SNBC

SNBC BTP-M280 Manuel utilisateur

SNBC

SNBC BTP-2002NP Manuel utilisateur

SNBC

SNBC BTP-2002NP Manuel utilisateur

SNBC

SNBC BTP-R880NP Manuel utilisateur

SNBC

SNBC BTP-P36 Manuel utilisateur

SNBC

SNBC BK-S216 Manuel utilisateur

SNBC

SNBC BTP-R580II Manuel du propriétaire

SNBC

SNBC BTP-P33 Manuel utilisateur

SNBC

SNBC BT-T080 Manuel du propriétaire

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur