SMC Networks 8724M INT Manuel utilisateur

TigerSwitch 100

User Guide

From SMC’s Tiger line of feature-rich workgroup LAN solutions

March 1998

900.168 Rev. B

SMC6608T SMC6608M

TigerSwitch 100

8-port Fast Ethernet Switches

◆Two models featuring either:

◆Eight fixed Auto-Negotiating 100BASE-TX ports

◆Two 4-port replaceable modules with 100BASE-TX

and/or 100BASE-FX ports

◆1.6 Gbps internal bandwidth

◆In-band and out-of-band management

User Guide

Information furnished by SMC Networks, Inc. (SMC) is believed

to be accurate and reliable. However, no responsibility is

assumed by SMC for its use, nor for any infringements of

patents or other rights of third parties which may result from its

use. No license is granted by implication or otherwise under

any patent or patent rights of SMC. SMC reserves the right to

change specifications at any time without notice.

SMC Networks, Inc.

Hauppauge, New York.

Trademarks:

SMC is a registered trademark; and TigerSwitch, TigerStack, EZ Hub, EZ Switch and

EliteFax are trademarks of SMC Networks, Inc. Other product and company names are

trademarks or registered trademarks of their respective holders.

Limited Warranty

HARDWARE: SMC Networks, Inc. (“SMC”) warrants these TigerSwitch 100 units

to be free from defects in workmanship and materials, under normal use and

service, for the following length of time from the date of purchase from SMC or

its Authorized Reseller:

TigerSwitch 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Three Years

If a product does not operate as warranted during the applicable warranty

period, SMC shall, at its option and expense, repair the defective product or

part, deliver to Customer an equivalent product or part to replace the defective

item, or refund to customer the purchase price paid for the defective product.

All products that are replaced will become the property of SMC. Replacement

products may be new or reconditioned. Any replaced or repaired product or

part has a ninety (90) day warranty or the remainder of the initial warranty

period, whichever is longer.

SMC shall not be responsible for any custom software or firmware, configura-

tion information, or memory data of Customer contained in, stored on, or

integrated with any products returned to SMC pursuant to any warranty.

SOFTWARE: SMC warrants that the software programs licensed from it will

perform in substantial conformance to the program specifications for a period

of ninety (90) days from the date of purchase from SMC or its Authorized

Reseller. SMC warrants the magnetic media containing software against failure

during the warranty period. No updates are provided. SMC’s sole obligation

hereunder shall be (at SMC’s discretion) to refund the purchase price paid by

Customer for any defective software products or to replace any defective media

with software which substantially conforms to SMC’s applicable published spec-

ifications. Customer assumes responsibility for the selection of the appropriate

applications program and associated reference materials. SMC makes no war-

ranty that its software products will work in combination with any hardware or

applications software products provided by third parties, that the operation of

the software products will be uninterrupted or error free, or that all defects in

the software products will be corrected. For any third party products listed in

the SMC software product documentation or specifications as being compatible,

SMC will make reasonable efforts to prove compatibility, except where the

non-compatibility is caused by a “bug” or defect in the third party’s product.

STANDARD WARRANTY SERVICE: Standard warranty service for hardware

products may be obtained by delivering the defective product, accompanied

by a copy of the dated proof of purchase, to SMC’s Service Center or to an

Authorized SMC Service Center during the applicable warranty period. Standard

warranty service for software products may be obtained by telephoning SMC’s

Service Center or an Authorized SMC Service Center, within the warranty

period. Products returned to SMC’s Service Center must be pre-authorized by

SMC with a Return Material Authorization (RMA) number marked on the out-

side of the package, and sent prepaid, insured, and packaged appropriately for

safe shipment. The repaired or replaced item will be shipped to Customer, at

SMC’s expense, not later than thirty (30) days after receipt by SMC.

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS

WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR,

REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID, AT SMC’S

OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE

AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS

OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR

OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER

ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY

OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAIN-

TENANCE OR USE OF ITS PRODUCTS.

SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND

EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES

NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S

MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED

ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF

THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER

HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT

OR TORT (INCLUDING NEGLIGENCE) SHALL SMC BE LIABLE FOR INCIDEN-

TAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF

ANY KIND, OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER

FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE,

INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTER-

RUPTION OF ITS PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTHING

HEREIN SHALL HAVE THE EFFECT OF LIMITING OR EXCLUDING SMC’S

LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY NEGLIGENCE.

Some states do not allow the exclusion of implied warranties or the limitation

of incidental or consequential damages for consumer products, so the above

limitations and exclusions may not apply to you. This warranty gives you spe-

cific legal rights which may vary from state to state. Nothing in this warranty

shall be taken to affect your statutory rights.

SMC

350 Kennedy Drive

Hauppauge, NY 11788

516-435-6000

LIMITED WARRANTY

Compliances.......................................................... v

1 About The TigerSwitch 100........................... 1-1

TigerSwitch 100 Overview ................................................. 1-3

Switch Architecture............................................................. 1-10

Management Options ......................................................... 1-12

Key Features and Benefits.................................................. 1-13

2 Planning......................................................... 2-1

Introduction to Switching................................................... 2-2

Sample Applications ........................................................... 2-3

3 Installation..................................................... 3-1

Selecting a Site.................................................................... 3-2

Equipment Checklist........................................................... 3-3

Mounting ............................................................................. 3-4

Powering Up....................................................................... 3-7

Making Network Connections............................................ 3-9

4 Configuration and Management.................. 4-1

Configuration Options........................................................ 4-3

Basic Port Settings............................................................... 4-4

Advanced System Configuration........................................ 4-5

System Monitoring .............................................................. 4-19

Advanced System Monitoring............................................. 4-21

Downloading System Software .......................................... 4-28

Resetting the Switch............................................................ 4-30

5 Management via SNMP.................................. 5-1

SNMP Protocol .................................................................... 5-2

MIB Objects......................................................................... 5-3

SNMP Parameter Configuration.......................................... 5-4

TABLE OF CONTENTS

Appendices

A Troubleshooting............................................ A-1

Switch Indicators................................................................. A-2

Diagnostic Tests .................................................................. A-3

System Diagnostics ............................................................. A-4

B Pin Assignments............................................ B-1

RJ-45 Pin Assignments........................................................ B-2

Console Port Pin Assignments ........................................... B-4

C Specifications ................................................ C-1

All Models ........................................................................... C-2

SMC6608T............................................................................ C-4

SMC6608M........................................................................... C-4

D Glossary ......................................................... D-1

TABLE OF CONTENTS

List of Figures

1-1. TigerSwitch 100T with 8 10BASE-T/100BASE-TX Ports

(Model SMC6608T)..................................................... 1-4

1-2. TigerSwitch 100M Base Unit...................................... 1-4

1-3. 4-Port Fast Ethernet Modules .................................... 1-4

1-4. 10BASE-T/100BASE-TX Ports .................................... 1-6

1-5. 100BASE-FX Ports ...................................................... 1-6

1-6. Front Panel LEDs........................................................ 1-7

1-7. Front Panel LED Arrays.............................................. 1-7

1-8. Console Port............................................................... 1-8

1-9. Configure Button........................................................ 1-8

1-10. Power Supply Receptacles......................................... 1-9

2-1. Collapsed Backbone.................................................. 2-3

2-2. Multiport Bridging Connections................................ 2-4

2-3. Server Farm Connectivity and Expansion................. 2-5

2-4. Cascading to a Fast Ethernet Switch......................... 2-6

2-5. Collapsed Backbone Using Fiber Cable ................... 2-7

2-6. High-Speed Fiber Backbone ..................................... 2-8

3-1. Attaching the Brackets............................................... 3-5

3-2. Installing the Switch in a Rack.................................. 3-5

3-3. Attaching the Adhesive Feet...................................... 3-6

3-4. Switch-Selectable Daisy-Chain Port ......................... 3-12

3-5. Fiber Cable Connectors ............................................. 3-13

4-1. System Configuration Program Login Screen........... 4-7

4-2. System Configuration Program Main Menu.............. 4-8

4-3. Password Configuration Screen................................. 4-10

4-4. Console Configuration Screen................................... 4-11

4-5. System Configuration Screen..................................... 4-12

4-6. Port Configuration Screen.......................................... 4-14

4-7. Spanning Tree Configuration Screen ........................ 4-16

iii

TABLE OF CONTENTS

4-8. Virtual LAN Configuration Screen............................. 4-18

4-9. System Information Screen........................................ 4-21

4-10. Port Status Screen....................................................... 4-22

4-11. Statistics Screen .......................................................... 4-23

4-12. Address Table Screen................................................. 4-25

4-13. Spanning Tree Information Screen ........................... 4-26

4-14. TFTP Download Screen............................................. 4-28

4-15. Reset Screen ............................................................... 4-30

5-1. SNMP Configuration Screen ...................................... 5-4

5-2. Community Strings Screen......................................... 5-5

5-3. Trap Receivers Screen................................................ 5-6

B-1. RJ-45 Connector Pin Numbers................................... B-2

B-2. DB-9 Console Port Pin Numbers............................... B-4

TABLE OF CONTENTS

FCC - Class A

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

interference to radio communications. It has been tested and found to comply

with the limits for a Class A computing device pursuant to Subpart B of Part 15

of FCC Rules, which are designed to provide reasonable protection against such

interference when operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference, in which case the

user, at his own expense, will be required to take whatever measures may be

required to correct the interference. You are cautioned that changes or modifi-

cations not expressly approved by the party responsible for compliance could

void your authority to operate the equipment.

You may use unshielded twisted-pair (UTP) cable for RJ-45 connections—

Category 3 or greater for 10 Mbps connections and Category 5 for 100 Mbps

connections. Use 50/125 or 62.5/125 multimode fiber optic cable for SC or ST-

type connections.

Warnings 1. Wear an anti-static wrist strap or take other suitable measures to

prevent electrostatic discharge when handling this equipment.

2. When connecting this hub to a power outlet, connect the field

ground lead on the tri-pole power plug to a valid earth ground

line to prevent electrical hazards.

EC Conformance Declaration

SMC contact for these products in Europe is:

SMC (Europe) Limited

1st Floor, Pyramid House, Easthampstead Road

Bracknell, Berkshire RG12 1NS, United Kingdom

This information technology equipment complies with the requirements of the

Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC. It

conforms to the following specifications:

EMC: EN55022 (1988)/CISPR-22 (1995) Class A

IEC 1000-4-2 4 kV CD, 8 kV AD

IEC 1000-4-3 (1995) 3 V/m

IEC 1000-4-4 (1995) 1.0 kV - (power line)

0.5 kV - (signal line)

IEC 1000-4-6 (1995) 3 Vrms

An EC Declaration of Conformity in accordance with ISO/IEC Guide 22 and

EN45014 was issued for this product.

Industry Canada - Class A

This digital apparatus does not exceed the Class A limits for radio noise

emissions from digital apparatus as set out in the interference-causing

equipment standard entitled "Digital Apparatus", ICES-003 of Industry Canada.

COMPLIANCES

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SMC Networks Changer

SMC Networks

SMC Networks SMC8024L2 Manuel de programmation

SMC Networks

SMC Networks EZ Networking SMC-EZ108FDT Manuel utilisateur

SMC Networks

SMC Networks IS3000-02 Manuel

SMC Networks

SMC Networks PFA Series Manuel utilisateur

SMC Networks

SMC Networks ZSE20C Series Manuel utilisateur

SMC Networks

SMC Networks ISA3 Manuel utilisateur

SMC Networks

SMC Networks ISE35 Manuel utilisateur

SMC Networks

SMC Networks SMC TigerSwitch 10/100 SMC6110L2 Manuel utilisateur

SMC Networks

SMC Networks 8504T FICHE Manuel utilisateur

SMC Networks

SMC Networks ZSE20B Manuel utilisateur

SMC Networks

SMC Networks ISE70 AB Series Manuel utilisateur

SMC Networks

SMC Networks TigerSwitch SMC6128PL2 Manuel utilisateur

SMC Networks

SMC Networks SMC EZ Stack 10/100 SMC5216 Manuel utilisateur

SMC Networks

SMC Networks ZSE20 Manuel utilisateur

SMC Networks

SMC Networks TigerSwitch 10 Manuel utilisateur

SMC Networks

SMC Networks PF3W5 Series Manuel utilisateur

SMC Networks

SMC Networks 6900FSC - annexe 1 Manuel de programmation

SMC Networks

SMC Networks SMC6826MPE Manuel utilisateur

SMC Networks

SMC Networks SMC6248M Manuel utilisateur

SMC Networks

SMC Networks SMC8126L2 Manuel utilisateur

SMC Networks

SMC Networks D-M9NAV Mode d’emploi

SMC Networks

SMC Networks 8024L2 - FICHE TECHNIQUE Guide d'installation

SMC Networks

SMC Networks ISE70G-N02-L2 Manuel utilisateur

SMC Networks

SMC Networks PF2M7 Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur