SMC Networks VQD1000 Series Manuel utilisateur

4 Port Direct Operated Poppet

Solenoid Valve

Series VQD1000

Body ported Base mounted

Series

VQD1151U

Average

speed

(mm/s)

400

450

500

350

300

250

200

150

100

Bore size

Series CJ2

Pressure 0.5 MPa

Load factor 50%

Stroke 60 mm

Series CM2

Pressure: 0.5 MPa

Load ratio: 50%

Stroke: 300 mm

ø6ø10 ø16 ø20 ø25 ø32 ø40

Base mounted

Series CJ2

Series CM2

Tube bore x Length

TU0425 x 1 m

VQD1151U

Speed controller

AS1201F-M5-04

AS2201F-02-04

Silencer AN120-M5

Use as a guide for selection.

Please confirm the actual conditions with SMC Sizing Program.

Cylinder Speed Chart

Base Mounted Conditions

Compact and lightweight (34 g)

with large flow capacity

Body width of 10 mm, C: 0.22 dm3/(s·bar) 2 W

C: 0.27 dm3/(s·bar)

3.2 W (U type: Large flow)

Perpendicular,

upward actuation

Horizontal actuation

Clean room specifications

available as special.

Main valve has no sliding seals or grease

and air is not exhausted to the atmosphere.

∗It is when the cylinder is extending that is meter-out controlled by speed controller which is directly

connected with cylinder, and its needle valve with being fully open.

∗The average velocity of the cylinder is what the stroke is divided by the total stroke time.

∗ Load factor: ((Load weight x 9.8)/Theoretical force) x 100%

Unprecedented high speed,

with stable response times

ON: 4 ms, OFF: 2 ms, Dispersion accuracy

±1 ms (With light/surge voltage suppressor

at a supply pressure of 0.5 MPa)

(Use clean and dry air.)

Available in vacuum applications

(Up to –100 kPa)

(Valve leakage: 0.03 cm3/s He or less)

Can be used in vacuum/release circuits

When used as a 3 port valve, conversion from N.O. to N.C. and

vice versa is possible by plugging either port 4(A) or 2(B).

Copper-free specifications

The fluid contacting section is copper-free and the

standard style can be used as it is.

2-8-1

VQC

VQ0

VQ4

VQ5

VQZ

VQD

Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page 2-9-2.

Connected actuator is started by manual operation.

Use the manual override after confirming that there is

no danger.

Warning

Caution

Non-locking push type (Tool required)

Attaching and detaching connectors

To attach a connector, hold the lever and connector unit

between your fingers and insert straight onto the pins of the

solenoid valve so that the lever’s pawl is pushed into the

groove and locks.

To detach a connector, remove the pawl from the groove by

pushing the lever downward with your thumb, and pull the

connector straight out.

Note) GENTLY pull the lead wire, otherwise it may cause contact

failure or disconnection.

Caution

• Standard: 2 W specifications

• Large flow: 3.2 W specifications (Power saver)

For the 3.2 W specifications (power saver), power consumption

at holding is reduced with the above circuit.

Refer to electrical power waveform as shown below.

(Rated voltage: 24 VDC)

Caution

When it is the manifold and the adjacent valve is

continuously energized, align them so that they would

be energized or de-energized alternately.

 How to order connector assembly

AXT661-14A-

Lead wire length

Nil

300 mm

600 mm

1000 mm

2000 mm

3000 mm

24V

3.2W

2.4W

0W 10 to 20 ms

Energy saving type

Applied voltage

ø3

Cover

Groove

Lever

Connector

Lever

Connector

LED

ZNR

Coil

(+, –)

(–, +)

Lead wire Connector

(+)

(–)

Lead wire Connector

LED

Coil

i1: Inrush current i2: Holding current

Coil temperature may get high due to ambient

temperature or energizing duration. Do not touch the

valve by hand directly.

When there is such a dangerous case to be touched

by hands directly, install a protective cover.

Warning

Caution

After confirming the gasket is correctly placed under

the valve, securely tighten the bolts with the proper

torque shown in the table below.

Proper tightening torque (N·m)

0.18 to 0.25

i1i2

Varistor

Precautions 1

• In order to turn it ON, push down the manual

override button in the direction the arrow ()

indicates until it stops (approx. 0.5 mm), and

release it to turn it OFF. How to Use Plug Connector

Wiring Specifications

Mounting of Valves

Continuous Energization

Manual Override Operation Simultaneous Energization

Timer circuit

Red C

Black A

Red C

Black A

Plug connector lead wire length

Lead wire length of plug connector

valve with lead wire is 300 mm. When

ordering a valve with a lead wire of 600

mm or longer, be sure to indicate the

model number of the valve without

connector and connector assembly.

Series VQD1000

2-8-2

Be sure to read before handling. For Safety Instructions and Solenoid Valve Precautions, refer to page 2-9-2.

Caution

Application example of “VQD11 1 V

W”

(Symbols used are typical examples.)

For obtaining the flow rate, refer to pages 2-1-8 to 2-1-11.

Vacuum valve

3(R) 4(A) Vacuum pad

1(P) 2(B)

Vacuum releasing air

Atmospheric pressure or

micro pressure

Precautions 2

• Use a VQD11 1 valve for vacuum applications.

Connect the vacuum source to the 3(R) port.

∗Air pressure cannot be applied to the 3(R) port.

• When used as a 3 port valve, conversion from N.O. to N.C. and

vice versa is possible by plugging either port 4(A) or 2(B).

∗ Cannot be used as 2 port valve.

How to Use the Valve for Vacuum Applications

How to Calculate the Flow Rate

(When used as a 3 port valve)

2-8-3

Series VQD1000

VQC

VQ0

VQ4

VQ5

VQZ

VQD

How to Order Valves

L155

VQD11

24 VDC

12 VDC

Rated voltage

Nil

M5 thread

Without sub-plate (Manifold)

M5 thread

Body ported

Base mounted

Port size

Nil

Valve option

Body type

Note)

Note) Energy saving type

Electrical entry

Lplug connector

Base mounted

Mplug connector

Base mounted

Standard

(2 W)

Large flow type

(3.2 W, Energy saving type)

4 port direct operated poppet valve

Air/Inert gas

0.7 MPa

0 MPa/–100 kPa

L plug connector, M plug connector

(With indicator light and surge voltage suppressor)

2 W 3.2 W (Energy saving type)

(Inrush: 3.2 W, Holding: 2.4 W)

Item

Type

Valve specifications

Electricity

specifications

JIS Symbol

Standard Specifications

(A)

(B)

(P)

(R)

Body ported (Single unit)

Body ported (Manifold)

Base mounted

Lplug connector

Body ported

Mplug connector

Body ported

4 Port Direct Operated Poppet

Solenoid Valve

Series VQD1000

Standard (2 W)

Vacuum (2 W)

For large flow (3.2 W)

For large flow, vacuum (3.2 W)

Note) Please consult with

SMC for other

voltages.

Note 1) Based on JIS B 8375-1981. Factor: With light/surge voltage suppressor (Use clean air).

Dispersion accuracy: ±1 ms

Note 2) Operating the valve at low temperatures may cause condensate to form, therefore dry air

must be used.

Note 3) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial

direction and at the right angles to the main valve and armature in both

energized and de-energized states every once for each condition.

(Values at the initial period)

Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000

Hz. Test was performed at both energized and de-energized states in

the axial direction and at the right angles to the main valve and

armature. (Values at the initial period)

ON: 4 ms, OFF: 2 ms

–10 to 50°C(2)

Not required

Non-locking push type

150/30 m/s2

Unrestricted

Dust tight

34 g (Without sub-plate)

24 V, 12 V

±10% of rated voltage

Class B or equivalent

L: Plug lead type

L plug connector, With lead wire

With light/surge voltage suppressor

LO: Plug lead type

L plug connector, Without lead wire

With light/surge voltage suppressor

M: Plug lead type

M plug connector, With lead wire

With light/ surge voltage suppressor

MO: Plug lead type

M plug connector, Without lead wire

With light/surge voltage suppressor

Valve construction

Fluid

Maximum operating pressure

Minimum operating pressure/Vacuum

Response time(1)

Ambient and fluid temperature

Lubrication

Manual override

Shock /Vibration resistance(3)

Mounting position

Enclosure

Weight

Coil rated voltage

Allowable voltage fluctuation

Coil insulation type

Power consumption

Electrical entry

For details about certified products

conforming to international standards,

visit us at www.smcworld.com.

2-8-4

Piping plate assembly

VQD1000-20A

Construction

Flow Characteristics

Valve Single Unit Option

Material

—

Aluminum

ZDC

Aluminum

HNBR

Resin

Stainless steel

Aluminum

HNBR

Steel

Note

VQD1000-S-M5 (Base mounted only)

VQD1000-9-1H

AXT632-7-13 (M1.7 x 18)

Solenoid coil assembly

Sub-plate

Body

Spool valve

Poppet

Guide ring

Return spring

Manual override

Gasket

Round head combination screw

Description

Note) Body cannot be disassembled.

3(R) 4(A) 1(P) 2(B)

1(P)

JIS Symbol

(A)

(B)

(P)

(R)

Manifold type (VQD1131) can be changed to single unit type (VQD1121) by mounting plate assembly.

Valve model

Body ported VQD1121- -M5

VQD1121 -



-M5

VQD1151--M5

VQD1151



- M5

M5 x 0.8

0.22

0.27

0.22

0.27

0.16

0.24

0.10

0.25

0.05

0.07

0.05

0.07

0.19

0.28

0.22

0.27

0.31

0.28

0.31

0.28

0.05

0.07

0.06

0.07

Base mounted

(With sub-plate)

Port size C

[dm3/(s·bar)] bCv

1  4/2 (P  A/B) 4/2  5/3 (A/B  EA/EB)

Flow characteristics

Component Parts

que try!0

Note) Plate should be mounted with manifold mounting screws (M1.7 x 20).

Proper tightening torque of thread: 0.18 to 0.25 N·m

2-8-5

4 Port Direct Operated Poppet Solenoid Valve Series VQD1000

VQC

VQ0

VQ4

VQ5

VQZ

VQD

Dimensions

L plug connector: VQD1121-L-M5

M plug connector: VQD1121-M-M5

Lead wire length 300 mm 2-M5 x 0.8

4(A), 2(B) port

2-ø3.5 mounting hole

2-M5 x 0.7

1(P), 3(R) port

Indicator light

0.6 0.6

5.3 5.3

Direct manual override

5.5

(11)

0.5 0.5

25.5

21.5 4

28.5

50.5

(R)

(P)

7.4 3

(13)

Series VQD1000

2-8-6

Dimensions

SMC

5.5

2-ø3.5 mounting hole

Lead wire length 300 mm

Indicator

light

10.9 9.1

11.2

17.5

Direct manual override

4-M5 x 0.8

1 (P), 4(A), 2(B), 3(R) port

50.5

5.5

28.5

33.5

M plug connector (M)

4(A)2(B)

3(R)

1(P)

L plug connector (L)

1(P)

L plug connector: VQD1151-L-M5

M plug connector: VQD1151-M-M5

2-8-7

4 Port Direct Operated Poppet Solenoid Valve Series VQD1000

VQC

VQ0

VQ4

VQ5

VQZ

VQD

How to Order Manifold

Plug lead unit

manifold

M5 thread

One-touch fitting for ø4

Cylinder port

(Base mounted only)

2 stations

20 stations (Max.)

Valve station

How to Order Manifold Assembly

Prefix the asterisk to the part nos. of the solenoid valve, etc.

Enter in order starting from the first station on the D side.

U side

D side

Stations········ 1 2 3 4 5

VQD1151-5L

VQD1000-10A-5

VV4QD15-05M5

1(P), 3(R) port: Rc 1/8

3R 1P

How to Order Valves

24 VDC

12 VDC

Standard (2W)

Vacuum (2 W)

For large flow (3.2 W)

For large flow, vacuum (3.2 W)

Nil

Valve option

Electrical entry

Note)

Note) Energy saving type

Body ported

Base mounted

Manifold

Body ported

Base mounted

Body type

Port size (Body ported only)

VV4QD1 5

VQD11 L

551M5

M5 thread

Note) Please consult

with SMC for

other voltages.

Specify the part numbers for valves and options together beneath the

manifold base part number.

Plug lead unit manifold

VV4QD15-05M5········ 1 set

—

Manifold base part no.

∗VVQD1000-10A-5····1 set

—

Blanking plate part no. (1st station)

∗VQD1151-5L············4 sets — Valve part no. (2 to 5th station)

Rated voltage

L: Plug lead type

L plug connector, With lead wire

With light/surge voltage suppressor

LO: Plug lead type

L plug connector, Without lead wire

With light/surge voltage suppressor

M: Plug lead type

M plug connector, With lead wire

With light/surge voltage suppressor

MO: Plug lead type

M plug connector, Without lead wire

With light/surge voltage suppressor

Series VQD1000

2-8-8

Blanking plate assembly/Body ported

VVQD1000-10A-2

Blanking plate assembly/Base mounted

VVQD1000-10A-5

Individual SUP spacer/Base mounted

VVQD1000-P-M5-5

Blanking plate assembly includes 2 screws

and gasket

Blanking plate assembly includes 2 screws

and gasket

9.5

10.8

4.5

0.8

Exhaust port

M5 x 0.8

Individual EXH spacer with screw (2 pcs.)

and gasket

9.5

10.8

4.5

0.8

Supply port

M5 x 0.8

Individual SUP spacer with screw (2 pcs.)

and gasket

Mount the individual SUP spacer on the manifold base, and thus making it possible to have supply port individually for each valve.

Individual EXH spacer/Base mounted

VVQD1000-R-M5-5

Mount the individual EXH spacer on the manifold base, and thus making it possible to have supply port individually for each valve. (Common EXH type)

Manifold Option

2-8-9

4 Port Direct Operated Poppet Solenoid Valve Series VQD1000

VQC

VQ0

VQ4

VQ5

VQZ

VQD

Plug lead unit manifold (VV4QD12-)

2345678910

n: Stations

L11 12 13 14 15 16 17 18 19 20

105

116

108

127

119

138

130

149

141

160

152

171

163

182

174

193

185

204

196

215

207

237

229

226

218

12345 n

Direct manual override

(Non-locking)

L plug connector (L)

M plug connector (M)

0.6

5.35.3

0.5 0.5

P = 11 10

4L2

50.5

176.5

Lead wire length 300 mm

1(P), 3(R) port

4-Rc 1/8

M5: M5 thread

2n-M5 4(A), 2(B) port

Indicator light

2-ø4.5 (Mounting hole)

Dimensions

U side

D side

Stations

Dimensions

Series VQD1000

2-8-10

Autres manuels pour VQD1000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SMC Networks Unité de contrôle

SMC Networks

SMC Networks VFR4000 Series Manuel utilisateur

SMC Networks

SMC Networks XGTP31-50336 Series Manuel utilisateur

SMC Networks

SMC Networks EX260 Series Manuel utilisateur

SMC Networks

SMC Networks VDW30-XF Series Manuel du propriétaire

SMC Networks

SMC Networks XLD Series Manuel utilisateur

SMC Networks

SMC Networks VQC4000 Manuel utilisateur

SMC Networks

SMC Networks XGTP Series Manuel utilisateur

SMC Networks

SMC Networks EX250-SPR1 Manuel utilisateur

SMC Networks

SMC Networks VQC1000 Manuel utilisateur

SMC Networks

SMC Networks VQ100 Series Manuel

SMC Networks

SMC Networks VQZ100 Series Manuel utilisateur

SMC Networks

SMC Networks VHS20-D Series Manuel utilisateur

SMC Networks

SMC Networks VF1000 Series Manuel

SMC Networks

SMC Networks LVP Series Manuel utilisateur

SMC Networks

SMC Networks SV Series Manuel utilisateur

SMC Networks

SMC Networks VJ3000 Manuel

SMC Networks

SMC Networks VM1000 Series Manuel utilisateur

SMC Networks

SMC Networks EX180 Series Manuel utilisateur

SMC Networks

SMC Networks S070 Series Manuel utilisateur

SMC Networks

SMC Networks SZ3000 Series Manuel utilisateur

SMC Networks

SMC Networks VDW 10 Manuel

SMC Networks

SMC Networks VXF2 Series Manuel utilisateur

SMC Networks

SMC Networks VHS20 Series Manuel utilisateur

SMC Networks

SMC Networks VP500 Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur