SMC Networks HPAV-ETH2 - annexe 1 Manuel utilisateur

USER GUIDE

SMCHPAV-ETH2

EZ Connect Powerline™

200Mbps HomePlug AV Adapter

Information furnished by SMC Networks, Inc. (SMC) is believed to

be accurate and reliable. However, no responsibility is assumed by

SMC for its use, nor for any infringements of patents or other rights

of third parties which may result from its use. No license is granted

by implication or otherwise under any patent or patent rights of SMC.

SMC reserves the right to change specifications at any time without

notice.

SMC Networks, Inc.

20 Mason

Irvine, CA 92618

Europe:

SMC Networks Spain S.L.

C/Fructuós Gelabert 6-8, 2º, 2ª

Edificio Conata II

08970 Sant Joan Despí

Barcelona, Spain

Trademarks:

SMC is a registered trademark; and EZ Connect Powerline is a

trademark of SMC Networks, Inc. Other product and company

names are trademarks or registered trademarks of their respective

holders.

Warranty and

Product Registration

To register SMC products and to review the detailed warranty

statement, please check www.smc.com for the warranty terms in your

country/region.

SMC Networks, Inc.

20 Mason

Irvine, CA 92618

Compliances

EC Declaration of Conformity

SMC contact for these products in Europe is:

SMC Networks Spain, S.L.

Edificio Conata II,

Fructuós Gelabert 6-8 2º 2ª

08970 Sant Joan Despí, Barcolona,Spain

This product indicates compliance with the Essential Requirements of

the EMC Directive (2004/108/EC) and the LVD Directive

(2006/95/EC) of the European Union. This equipment meets the

following conformance standards.

EN 60950-1: 2006

EN 61000-3-2: 2006

EN 61000-3-3 : 1995+A1:2001+A2:2005

EN 55024: 1998+A1:2001+A2:2003

EN 55022: 1998+A1:2000+A2:2003

The official CE certificate of conformity can be downloaded by

selecting the relevant model/ part number from www.smc.com ->

support -> download"

Contents

1 Introduction ................................................................................................ 1

1.1 Minimum System Requirements ...................................................... 1

1.2 Package List..................................................................................... 1

2 Safety Cautions ......................................................................................... 2

3 Hardware Overview ................................................................................... 3

3.1 Ethernet Interface............................................................................. 3

3.2 Buttons ............................................................................................. 3

3.3 LEDs................................................................................................. 3

4 Installing the Configuration Utility for Windows.......................................... 5

5 Working with the Configuration Utility for Windows ................................... 8

5.1 Main Tab .......................................................................................... 8

5.2 Privacy Tab .................................................................................... 12

5.3 Diagnostics Tab.............................................................................. 14

5.4 About Tab....................................................................................... 16

6 SYNC button Usage ................................................................................ 17

6.1 Creating a private network ............................................................. 17

6.2 Joining a Network........................................................................... 18

6.3 Leaving a Network.......................................................................... 19

Appendix A Specifications ................................................................... 21

Appendix B Acronyms and Abbreviations ........................................... 22

Appendix C About QoS........................................................................ 23

1 Introduction

Thank you for purchasing an SMC product. The SMCHPAV-ETH2 is a fast

200Mbps*Powerline HomePlug AV Ethernet Adapter which allows you to

connect computers, or Ethernet-enabled devices in your home or office and to

share an Internet connections through the in-house electrical wiring .

*200Mbps—is the physical data rate. Actual data throughput may be lower.

1.1 Minimum System Requirements

For Configuration Utility, computer with

- 200MHz above CPU with 128MB RAM

- 20MB free disk space

- 10/100Mbps Ethernet Adapter with RJ-45 connector

- Windows 7, Vista, XP (with SP2) or 2000 (with SP4)

For Hardware Installation

- At least 2 HomePlug AV devices

- Available power outlet

- Available Ethernet port with RJ-45 connector on each computer or

networking device

1.2 Package List

z1 SMCHPAV-ETH2 HomePlug AV Ethernet Adapter

z1 CD-ROM with software utility and user manual

z1 RJ-45 Ethernet cable

z1 Quick Installation Guide

z1 Warranty Information Card

2 Safety Cautions

This device is used for connection to the AC electrical wiring. In order to use the

device correctly and safely please read the instructions before using the device.

For installation instructions, please refer to the installation section of this user

guide.

zFollow all the warnings and instructions marked on the product.

zBefore cleaning the device, unplug it from the wall outlet. Use a dry cloth

for cleaning. Do not use liquid or aerosol cleaners.

zDo not place the device near water.

zDo not place the device near or over a radiator or heat register.

zDo not use an extension cord between the device and the power outlet.

zOnly professional technicians should service the device. Opening or

removing covers may result in exposure to dangerous voltage points or

other risks.

zUnplug the device from the power outlet and refer to professional service

personnel for the following conditions:

–If liquid has been spilled into the product.

–If the device has been exposed to rain or water.

–If the device does not operate normally when following the operation

instructions.

–If the device shows a significant change in performance.

3 Hardware Overview

3.1 Ethernet Interface

Use one end of the network cable included in the box to connect to the Ethernet

port (RJ-45) of the SMCHPAV-ETH2. Use the other end of the cable to connect

to the Ethernet port (RJ-45) of a computer or any other Ethernet-enabled

networking device.

3.2 Buttons

Figure 3-1 Side panel

Reset: Restore the factory default settings.

Sync: Activate network security. Refer to chapter 6 for more information.

3.3 LEDs

As shown in Figure 3-2, there are 3 LEDs on the front panel to indicate the status

of the adapter:

Power LED

- Green LED: Power on.

- OFF: Power off.

Ethernet LED

- Green LED: The Ethernet connection is ready.

- Blinking: The Ethernet connection is transmitting or receiving data.

- OFF: No Ethernet network activity.

Data LED

- Blinking: The Powerline connection is transmitting or receiving data.

- Red LED:Low link speed (Data rate is slower than 30Mbps)

- Yellow LED:Normal link speed (Data rate is between 30-50Mbps)

- Green LED: Excellent link speed (Data rate is faster than 50Mbps)

- OFF: No Powerline network activity

Figure 3-2 Top view

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SMC Networks Adaptateur

SMC Networks

SMC Networks SMCWUSB-N Manuel utilisateur

SMC Networks

SMC Networks SMCWUSB-N4 Manuel utilisateur

SMC Networks

SMC Networks SMC-BT10 EZ Connect Manuel utilisateur

SMC Networks

SMC Networks WiShare SMCWTVA100 Manuel utilisateur

SMC Networks

SMC Networks SMCWCB-GM Manuel utilisateur

SMC Networks

SMC Networks HP1D-USB - annexe 1 Manuel utilisateur

SMC Networks

SMC Networks WCB-N - annexe 2 Manuel utilisateur

SMC Networks

SMC Networks SMCWAA-G Manuel utilisateur

SMC Networks

SMC Networks EZ Connect SMC2435W Manuel utilisateur

SMC Networks

SMC Networks SMC2862W-G EZ Connect Manuel utilisateur

SMC Networks

SMC Networks 2870W - annexe 1 Manuel utilisateur

SMC Networks

SMC Networks EZ Connect SMCWUSBS-N3 Manuel utilisateur

SMC Networks

SMC Networks EZ Connect SMC2662W Manuel utilisateur

SMC Networks

SMC Networks 2662W-AR Manuel utilisateur

SMC Networks

SMC Networks EZ Connect g SMCWUSBT-G2 Manuel utilisateur

SMC Networks

SMC Networks SMCWCB-N Manuel utilisateur

SMC Networks

SMC Networks SMC EZ Connect g SMCWCBT-G Manuel utilisateur

SMC Networks

SMC Networks SMC EZ Connect SMCHT-ETH Manuel utilisateur

SMC Networks

SMC Networks 2835W V2 Manuel utilisateur

SMC Networks

SMC Networks EZ Connect SMC2662W Manuel utilisateur

SMC Networks

SMC Networks SMCWAPS-G Manuel utilisateur

SMC Networks

SMC Networks WiShare SMCWTVA100 Manuel utilisateur

SMC Networks

SMC Networks SMCWAA-B Manuel utilisateur

SMC Networks

SMC Networks 802.11g Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur