Sindoh DP203 Manuel utilisateur
Read the User Manual before operating the product,
and keep the manual at a convenient place near the
product.
3DWOX Desktop Manual
3dprinter.sindoh.com
DP200
/
DP102
DP201
/
DP202
/
DP203
2X
/
2X DP303
1X
/
1X DP302
3DWOX 1
/
DP103
2
Contents
1. Basic UI Elements -------------------------------------------------------------------------------------------------------------- 4
2. Functions and Information -------------------------------------------------------------------------------------------------- 6
2.1 Loading ----------------------------------------------------------------------------------------------------------------------------- 6
Detail description ----------------------------------------------------------------------------------------------------------------- 6
2.2 Profile Value Setting ------------------------------------------------------------------------------------------------------------- 6
Detail description ----------------------------------------------------------------------------------------------------------------- 6
2.3 Custom Profile ------------------------------------------------------------------------------------------------------------------ 11
2.4 Filament Information Indicator ---------------------------------------------------------------------------------------------- 13
Detail description --------------------------------------------------------------------------------------------------------------- 13
2.5 View Mode Selection Button------------------------------------------------------------------------------------------------- 13
Detail description --------------------------------------------------------------------------------------------------------------- 14
2.6 Moving a model ---------------------------------------------------------------------------------------------------------------- 14
2.7 Adjusting Model Size ---------------------------------------------------------------------------------------------------------- 15
2.8 Model Rotation ----------------------------------------------------------------------------------------------------------------- 15
2.9 Print ------------------------------------------------------------------------------------------------------------------------------- 15
2.10 Standard Menu Bar ------------------------------------------------------------------------------------------------------------ 15
2.11 Select a Cartridge -------------------------------------------------------------------------------------------------------------- 16
2.12 Equal Distribution -------------------------------------------------------------------------------------------------------------- 18
2.13 Merge & Split -------------------------------------------------------------------------------------------------------------------- 19
Merge ---------------------------------------------------------------------------------------------------------------------------- 19
Split -------------------------------------------------------------------------------------------------------------------------------- 19
Detail description -------------------------------------------------------------------------------------------------------------- 19
3. Printing (basic functions) ------------------------------------------------------------------------------------------------- 25
3.1 Loading 3D Model Files ------------------------------------------------------------------------------------------------------ 25
3.2 Basic Parameter Setting ------------------------------------------------------------------------------------------------------ 25
3.3 Slicing ----------------------------------------------------------------------------------------------------------------------------- 25
3.4 Print -------------------------------------------------------------------------------------------------------------------------------- 26
USB Thumbdrive---------------------------------------------------------------------------------------------------------------- 26
Network Connection ----------------------------------------------------------------------------------------------------------- 26
Local Network Usage---------------------------------------------------------------------------------------------------------- 27
4. Advanced Features ---------------------------------------------------------------------------------------------------------- 29
4.1 Support Edit Function --------------------------------------------------------------------------------------------------------- 29
Support Editing View Mode ------------------------------------------------------------------------------------------------- 29
4.2 3D Model Analysis Function ------------------------------------------------------------------------------------------------ 32
Select 3D Model ---------------------------------------------------------------------------------------------------------------- 32
Under Analysis menu, select Thickness / Overhang. ----------------------------------------------------------------- 33
Analysis Control Window ---------------------------------------------------------------------------------------------------- 33
Thickness Analysis Function ------------------------------------------------------------------------------------------------ 33
Overhang Analysis Function ------------------------------------------------------------------------------------------------ 34
3
4.3 Function to Calculate Optimal Printing Direction ---------------------------------------------------------------------- 34
Estimated Printing Error Surface ------------------------------------------------------------------------------------------- 34
Overhang Surface ------------------------------------------------------------------------------------------------------------- 34
Amount of Support ------------------------------------------------------------------------------------------------------------- 34
4
1. Basic UI Elements
Reference
-
Font used in the printer GUI and the user manual is the “NANUM” font provided by NAVER.
After installation is complete, double click on the icon created on your desktop, a screen similar to the following
appears. Explanation is as follows.
1 2 3 4
5
6
7
8
9
10
11 12
13
14
15
No. Name Explanation
1 Standard menu bar Most program functions are available in this menu bar. Opening files,Loading
preset values, Exporting program values and more functions available.
2 3D view Displays a reconstructed 3D model loaded on the program.
3 Select view angles You may look at the three-dimensional view from the front, back, left, right,
up, and down based on the selected angle.
4 Printer Domain In 3D view, displays actual printer domain showing the location and size of
the model.
5 View Mode Selection
button
On the screen 3 types of viewing modes are available. 3D Model Viewer,
Support Edit Viewer, Layer Viewer are available.
6 Position button Moves model in direction of 2 axes.
7 Scale button Changes the model’s size. (zoom or change length)
8 Rotation button Rotates object on set angles based on 3 axis.
9 Print button Connects to a printer to print a sliced model over the network.
10 Layer Color button Select colors to print by layers.
11 Printer frontal indication Indicates the front of the printout.
5
No. Name Explanation
12 3D model 3D model data displayed on the screen.
13 Import button (LOAD) Loads printable 3D data into program.
14 Settings button Settings for values necessary for slicing.
15 Filament information
indicator
Shows information on filaments inside the printer. Easily informs user of
filament material, color and remaining quantity.
2X/2X DP303, 5X and 7X display two bars when both cartridges are loaded.
16 (2X/2X DP303, 5X, 7X)
No. Name Explanation
16 Select a Cartridge
button
It is enabled only for the 2X/2X DP303, 5X and 7X Loaded cartridges will be
displayed .
If two or more objects are loaded, additional lines with cartridge selection options
will be displayed.
Cartridges can be selected and printed according to each mesh or object.
6
2. Functions and Information
2.1 Loading
Loads a printable 3D model and displays it on the screen.
Currently supported file formats are ply, obj, stl (binary, ascii, amf)
Detail description
1Click on the Import button located left of screen.
2After selecting file, 3D model file is displayed as if it’s on the printer bed.
2.2 ProleValueSetting
Slicing and printing require variety of parameter values. From the material of the filament, to the height of the
sliced layers, and to the printing speed, various parameters should be configured.
Detail description
1Click on the Settings button located on left bar.
2According to selected mode a window will pop up, user can input desired profile.
7
Easy Mode
-
Easy mode can be set for printing speed-quality, material, support pattern, and inside filling.
-
For the 2X/2X DP303, 5X and 7X, Cartridge No. is enabled.
Advanced Mode
-
This enables the user to change profiles to modify output values as he/she desires.
-
Custom profiles (= user-defined profiles) can also be edited in the advanced mode. (See 2.3 Custom Profile.)
Basic
<This applies to the default profiles of the slicer program.>
-
For the DP 201, DP 201 bed temperature and material settings are disabled.
8
-
For the 2X/2X DP303, 5X and 7X, two cartridges will be on the list, and each cartridge can be set individually.
-
sign marked values are synchronized for two cartridges. Individual values cannot be set independently.
-
Support type can be selected or disabled.
-
Profile selection bar: The user may choose either a default profile or a custom profile.
-
Reset button: Clicking the “Reset” button will restore the current setting before the new setting is saved
(before the “OK” or the “Apply” button is clicked).
However, the “Creation Position” in the “Support” tab and the “Bed Fixation Type” in
the “Bed Fixation” tab will be retained even after the “Reset” button is clicked.
-
OK button: This will save all the setting values and close the dialog box.
-
Apply button: This will save the setting values without closing the window.
-
Cancel button: This will close the dialog box without saving the setting values.
<This applies to custom profiles (not the default profiles of the slicer program).>
-
“Edit” button: If the user clicks this button, the changes in the “Edit Custom Profile” will be saved,
and the user will return to the advanced mode, where the changes will also be reflected.
If the user does not save the changes in the “Edit Custom Profile”, the changes will not be reflected
in the advanced mode.
-
The other settings will be identical to those of the default profile.
Quality / Shell
-
Sets value for bottom / top surface thickness and external wall of the model.
-
2X/2X DP303, 5X, 7X :
sign marked values are synchronized for two cartridges.
Individual values cannot be set independently.
Infill
-
Sets value for infill and skin of the model.
9
Speed
-
It controls the printing and travel speeds.
-
If you print large object with a high “Fill Density”, please reduce the “Travel Speed”.
Retraction / Cooling
-
Sets control values for the retraction of filament and nozzle cooling fan.
Multi Nozzle
-
It is enabled only for the 2X/2X DP303, 5X and 7X.
-
It is a window to set profile when using multiple nozzles.
-
For outputting a large printout with the multi-nozzle, set the lowering bed value to be larger (0.8 mm
recommended) than the default value (0.2 mm).
Wipe Tower
-
It is enabled only for the 2X/2X DP303, 5X and 7X. This feature is recommended for use when
printing on one layer with two cartridges.
1. While using other nozzle, wipe off any leaking filament residue from the waiting nozzle to maintain a
smooth output surface.
2. When the nozzle is replaced, the filament is first output to the Wipe tower to compensate for
the filaments leaked from the nozzle.
10
-
The Wipe Tower is divided into an Inner tower and an Outer tower, and one cartridge can be used in the
tower of each part.
For example, if you set the outer cartridges to (1) as shown, the inner tower will automatically be set to
cartridge (2).
-
In order to ensure a stable Wipe tower output, please enlarge the tower raft and tower size according
to the size of the shape you want to output.
-
Select [Advanced Mode]-[Enable Wipe Tower] and [Layer Viewer] to show the Wipe Tower.
Support
-
It is used to set the position and pattern of support.
Bed Adhesion
-
It tab enables setting according to assigned fixing type.
-
Please set the bed adhesion type to [Brim] if the flexible filament is used to print a model with narrow
bottom. Otherwise, the output will not stick to the bed or warp.
-
In outputting a printout of large volume with a filament made of ABS material, the printout and the raft may
separate from each other because the printout is shrunk during the outputting. In such case, decrease the
“First Layer Airgap” or increase the “Flow Compensation” ([Basic]) before outputting the printout.
Shape Error Correction
-
Shape error correction provides functions to correct mesh errors. (Ex: Printing along the mesh surface).
Ce manuel convient aux modèles suivants
9
Table des matières
Autres manuels Sindoh Imprimante 3D
Sindoh
Sindoh DP201 Series Manuel utilisateur
Sindoh
Sindoh A1SD Series Manuel utilisateur
Sindoh
Sindoh DP200 Series Manuel utilisateur
Sindoh
Sindoh 3DWOX 5X Manuel utilisateur
Sindoh
Sindoh 3DWOX-1 Manuel utilisateur
Sindoh
Sindoh A1 Series Manuel utilisateur
Sindoh
Sindoh DP201 Series Manuel utilisateur
Sindoh
Sindoh 3DWOX 2X Manuel utilisateur
Sindoh
Sindoh 3DWOX 1 Manuel utilisateur
Sindoh
Sindoh 5X Series Manuel utilisateur
