Sime MURELLE REVOLUTION 30 Manuel

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

UK Cod. 6316191 - 08/2013

6328590 - 01/2019 - R3

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

UK Cod. 6316191 - 08/2013

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

Cod. 6316191 - 08/2013

please position here a sticker

from installation pack

BOILER DETAILS

USER, INSTALLATION AND SERVICING INSTRUCTIONS

MURELLE REVOLUTION 30

Wall-mounted hybrid condensing boiler

Cod.

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

199839

SAFE HANDLING

This boiler may require 2 or more operatives to move it into its installation site, remove it from its packaging and

during movement into its installation location. Manoeuvring the boiler may include the use of a sack truck and involve

lifting pushing and pulling.

Caution should be exercised during these operations.

Operatives should be knowledgeable in handling techniques when performing these tasks and the following precau-

tions should be considered:

– Grip the boiler at the base

– Be physically capable

– Use personal protective equipment as appropriate e.g. gloves, safety footwear.

During all manoeuvres and handling actions, every attempt should be made to ensure the following unless unavoi-

dable and/or the weight is light.

– Keep back straight

– Avoid twisting at the waist

– Always grip with the palm of the hand

– Keep load as close to the body as possible

– Always use assistance

WARNING

Caution should be exercised when performing any work on this appliance.

Protective gloves and safety glasses are recommended.

– Avoid direct contact with sharp edges.

– Avoid contact with any hot surfaces.

NOTICE

Please be aware that due to the wet testing of the appliance, there may some residual water in the hydraulic circuit.

– Protect any surfaces, carpets or floorings.

– Use a suitable container to catch any water that escape when removing the protective caps from the connections.

All descriptions and illustrations provided in this manual have been carefully prepared but we reserve the right to make

changes

and improvements in our products that may affect the accuracy of the information contained in this manual.

IMPORTANT NOTICE

For the first year all of our appliances are protected by our manufacturer’s guarantee which covers both parts and

labour.

As you would expect from Sime Ltd, it is our aim to provide our valued customers with the best in after sales and

service.

To take advantage of any extended warranty offered, all you have to do is to adhere to these 3 simple conditions:

The installation must be carried out to Manufacturers/Benchmark Standards by a Gas Safe Registered

Engineer, and recorded in the installation manual.

The appliance must be registered with both Sime Ltd and Gas Safe within 30 days of installation.

The appliance must be serviced every 12 months, within 30 days of the anniversary of the installation date, by either

Sime Ltd or a Gas Safe registered engineer- ensuring that the Benchmark service record in the installation

manual is completed.

Failure to comply with the above will result in only the 12 month warranty being offered.In the absence of any proof

of purchase, the 12 month warranty period will commence from the date of manufacture of the boiler as shown on the

appliance data plate.

Please refer to commissioning instructions for filling in the checklist at the back of this installation guide.

Note: All Gas Safe registered installers carry a ID Card.

You can check your installer is Gas Safe Registered by calling 0800 408 5577

SIME COMBINATION BOILERS

Installer checklist

Please remember to carry out the following checks after installation. This will achieve complete customer

satisfaction, and avoid unnecessary service calls. A charge will be made for a service visit where the fault is not

due to a manufacturing defect.

Has a correct by-pass been fitted and adjusted?

Has the system and boiler been flushed?

Is the system and boiler full of water, and the correct pressure showing on the pressure gauge?

Is the Auto Air Vent open?

Has the pump been rotated manually?

Is the gas supply working pressure correct?

Is the boiler wired correctly? (See installation manual).

Has the D.H.W. ﬂow rate been set to the customer requirements?

Has the customer been fully advised on the correct use of the boiler, system and controls?

Has the Benchmark Checklist in the use and maintenance section of this manual, been completed?

––

The Benchmark Scheme

Sime is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and com

missioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimise

safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry Council.

For more information visit www.centralheating.co.uk.

Please ensure that the installer has fully completed the Benchmark Checklist in the use and maintenance section of

the installation instructions supplied with the product and that you have signed it to say that you have received a full

and clear explanation of its operation.

The installer is legally required to complete a commissioning checklist as a means of complyng with the appropriate

Building Regulations (England and Wales).

All installations must be notified to Local Area Building Control either directly or through a Competent Persons

Scheme.

A Building Regulations Compliance Certificate will then be issued to the customer who should, on receipt, write the

Notification Number on the Benchmark Checklist.

This product should be serviced regularly to optimise its safety, efficiency and performance.

The service engineer should complete the relevant Service Record on the Benchmark Checklist after each service.

The Benchmark Checklist may be required in the event of any warranty work and as supporting documentation

relating to home improvements in the optional documents section of the Home Information Pack.

mportant Information

IS A STATUTORY REQUIREMENT THAT ALL GAS APPLIANCES ARE INSTALLED BY COMPETENT PERSONS,

ACCORDANCE WITH THE GAS SAFETY (INSTALLATION AND USE) REGULATIONS (CURRENT EDITION). The

manu

facturer’s instructions must not be taken as overriding any statutory requirements, and failure to comply

th these regulations may lead to prosecution.

o modifications to the appliance should be made unless they are fully approved by the manufacturer.

AS LEAKS: DO NOT OPERATE ANY ELECTRICAL SWITCH, OR USE A NAKED FLAME. TURN OFF THE GAS SUPPL

AND

VENTILATE THE AREA BY OPENING DOORS AND WINDOWS CONTACT THE GAS EMERGENCY SERVICE

080

0111999.

SAFETY WARNINGS AND REGULATIONS

m

WARNINGS

– After having unpacked the boiler en-

sure that it is undamaged and com-

plete including the valve pack, hanging

bracket and template.

– The appliance must be used as intend-

ed.

Sime Ltd

declines all responsible

for any injury or damage to persons,

animals,or property as a result of im-

proper installation, adjustment, main-

tenance or use.

–In the event of water leaks, disconnect

the appliance from the mains pow-

er supply, close the water mains and

seek help from a qualiﬁed engineer.

– In case of an accidental refrigerant

gas leak, disconnect the appliance

from the mains and open a window to

air the room where the appliance is in-

stalled.

–Periodically check that the operating

pressure of the water heating system

when cold is

1-1.2 bar

. If required, in-

crease the pressure or seek help from

a qualiﬁed engineer.

– If the appliance is not used for a long

period of time, the following opera-

tions must be carried out:

set the main isolation switch to "OFF";

close the gas and water valves for the

water heating system.

– To ensure continued efﬁcient opera-

tion of the appliance it is recommend-

ed that it is serviced regularly, at least

once a year. This is also a condition of

the boiler warranty.

– It is the law that any service or repair

is carried out by a Gas Safe Registered

engineer.

– Services must be recorded in the

maintenance section of this installa-

tion guide.

m

WARNINGS

–

It is recommended that all operators

read this manual carefully in order to

use the appliance in a safe and ration-

al manner.

–

This manual

is an integral part of the

appliance. It must therefore be kept

for future reference and must always

accompany the appliance.

–

Installation and maintenance

of this ap-

pliance must be carried out by a Gas

Safe Registered Engineer in accord-

ance with the instructions contained

in the manual. On completing the in-

stallation the boiler should be com-

missioned and details recorded in the

Benchmark section of this manual.

This is a condition of the warranty

RESTRICTIONS

d

DO NOT

– To allow children under the age of 8 to

use the appliance. The appliance can

be used by children no younger than

8 years old, by people with physical or

cognitive disabilities, and by people

lacking experience or the necessary

knowledge, provided that they are su-

pervised or have been instructed on

how to use the appliance safely and

that they understand the risks associ-

ated with it.

– To allow children to play with the ap-

pliance.

–To allow unsupervised children to per-

form user maintenance and cleaning.

–Do not use electrical devices or ap-

pliances such as switches, electrical

appliances etc if you can smell gas. If

this should happen:

open the doors and windows to venti-

late the room;

turn the gas off at the meter;

call the emergency service 0800

111999.

– Do not touch the appliance with bare

feet or with any wet part of the body.

– Do not carry out any repair, mainte-

nance or cleaning operation before

having disconnected the appliance

from the mains power by setting the

main switch to "OFF", and closing the

gas supply.

– Do not modify the safety or adjustment

devices without authorization and in-

structions from the manufacturer.

–Do not block the condensate drain.

d

DO NOT

– Do not pull, detach or twist the electri-

cal cables coming out of the appliance

even if the appliance is disconnected

from the mains power supply.

– Do not expose the boiler to atmos-

pheric agents. The boiler is suitable

for use in partially protected places

according to standard EN 15502, with

a maximum ambient temperature of

60°C and a minimum of -5°C. We rec-

ommend installing the boiler under a

sloping roof, on a balcony or in a shel-

tered corner. In all cases it must not be

directly exposed to bad weather (rain,

hail, snow). The boiler is equipped with

a series of anti-freeze functions.

– Do not leave containers with ﬂamma-

ble substances in the room where the

appliance is installed.

– Do not place or store items on or close

to the appliance.

– Do not load the refrigerating circuits

with a refrigerant other than the one

indicated on the ID plate. Using a dif-

ferent refrigerant may cause serious

damage to the compressor.

– Do not use oils other than those indi-

cated in this manual. Using a different

oil may cause serious damage to the

compressor.

– Do not dispose of the R-410A refrig-

erant irresponsibly; it is a ﬂuorinat-

ed greenhouse gas with 1975 global

warming potential (GWP).

RANGE

MODEL CODE GAS COUNCIL

NUMBER

Murelle Revolution 30 8116102 47-283-87

COMPLIANCE

Our company declares that

Murelle Revolution 30

boilers comply

with the following directives:

– Gas Appliances EU Regulation 2016/426

– Low Voltage Directive 2014/35/UUE

– Electromagnetic Compatibility Directive 2014/30/EU

– Ecodesign Directive 2009/125/EC

– Regulation (UE) N. 811/2013 - 813/2013

– Energy Labeling Directive 2010/30/EC

SYMBOLS

a

WARNING

To indicate actions which, if not carried out correctly,

can result in injury of a general nature or may dam-

age or cause the appliance to malfunction; these

actions therefore require particular caution and ad-

equate preparation.

f

ELECTRICAL HAZARD

To indicate actions which, if not carried out correct-

ly, could lead to injury of an electrical nature; these

actions therefore require particular caution and ade-

quate preparation.

d

DO NOT

To indicate actions which MUST NOT BE carried out.

m

CAUTION

To indicate particularly important and useful informa-

tion.

MANUAL STRUCTURE

This manual is organized as follows.

USER INSTRUCTIONS

TABLE OF CONTENTS 9

DESCRIPTION OF THE APPLIANCE

TABLE OF CONTENTS 17

INSTALLATION AND SERVICING

INSTRUCTIONS

TABLE OF CONTENTS 35

USER INSTRUCTIONS

TABLE OF CONTENTS

VERY IMPORTANT!

PLEASE MAKE SURE YOUR COMMISSIONING CHECKLIST AND THE SERVICE INTERVAL RECORDS ENCLOSED

ARE FILLED IN CORRECTLY.

ALL GAS SAFE REGISTERED INSTALLERS CARRY A GAS SAFE ID CARD.

BOTH SHOULD BE RECORDED IN YOUR COMMISSIONING CHECKLIST AND A SERVICE INTERVAL RECORDS.

YOU CAN CHECK YOUR INSTALLER IS GAS SAFE REGISTERED

BY CALLING ON 0800 408 5500 OR ALTERNATIVELY WWW.GASSAFEREGISTER.CO.UK

1 USING THE BOILER MURELLE REVOLUTION 30 10

1.1 Main control panel (remote)......................10

1.1.1 Using the buttons ..................... 10

1.2 Start-up ......................................11

1.2.1 Preliminary checks.................... 11

1.2.2 Ignition.............................. 11

1.3 Settings using the MODE button ..................12

1.3.1 Time Programming ................... 13

1.3.2 Holiday function ...................... 14

1.3.3 Fault warnings ....................... 14

1.3.4 Quick settings ........................ 15

1.4 Navigating using the MODE button ................15

2 MAINTENANCE 16

2.1 Servicing......................................16

2.2 External cleaning...............................16

2.2.1 Cleaning the case ..................... 16

3 DISPOSAL 16

3.1 Disposal of the equipment (European Directive

2012/19/EU) ...................................16

1 USING THE BOILER MURELLE REVOLUTION 30

1.1 Main control panel (remote)

The main control panel (MCP) allows all of the necessary adjustments to be made to

Murelle Revolution 30

and to the connected

systems.

It also serves as a main room thermostat and can therefore be used by all operators, users, authorised maintenance technicians and

the technical service for the operations for which each of these ﬁgures is authorised, as described in detail in the relevant sections.

It communicates with the boiler control panel with an unpolarised bus line and OpenTherm protocol, and with the heat pump control

panel with a RS485 polarised ModBus two-wire line.

It is equipped with a volt free input for remote control, where relevant (GSM-Dialler/WiFi).

1 3

Gi 20 Set 2014Zona 10:30

Menu Modo

Modo: Inverno Progr. automatico - Set 18,0°C fino alle 11:30

11 9

10 8

Fig. 1

Button (A)

Multifunction encoder

Button (B)

Action carried out by pressing button (B)

Programmed time band

Mode selection

Measured outdoor temperature

Time

Presence of outdoor probe (OP)

Date

Measured ambient temperature

Modulation percentage

Flame

Controlled area

Request for heating (rad) or hot water (tap)

Heat pump operating

Action carried out by pressing button (A)

1.1.1 Using the buttons

With the appliance powered, from the

“Main screen”

Thu 18 Set 2014Zone 10:30

Menu Mode

Off

Fig. 2

Autres manuels pour MURELLE REVOLUTION 30

Table des matières

Autres manuels Sime Chaudière

Sime

Sime Super four Guide de l'utilisateur

Sime

Sime MURELLE HE 25-55 ErP Manuel utilisateur

Sime

Sime Planet Series Manuel utilisateur

Sime

Sime AQUA INOX EV 25 Manuel

Sime

Sime Murelle 25/55 OF ErP Manuel utilisateur

Sime

Sime ECOMFORT PLUS 25 HE Guide de l'utilisateur

Sime

Sime Murelle Pro HE 25 HO ErP Manuel utilisateur

Sime

Sime Planet Super 4 F.S. Manuel utilisateur

Sime

Sime Planet Dewy 30 Manuel utilisateur

Sime

Sime Format.zip 25 OF Manuel utilisateur

Sime

Sime OPEN HYBRID SMART Manuel utilisateur

Sime

Sime SOLO 25 EV Manuel

Sime

Sime Planet Series Manuel utilisateur

Sime

Sime PLANET 25 OF C Manuel utilisateur

Sime

Sime AR Manuel utilisateur

Sime

Sime RONDO Series Manuel utilisateur

Sime

Sime MURELLE EV Manuel utilisateur

Sime

Sime GO 18 BF G20 Manuel

Sime

Sime ESTELLE HE Manuel utilisateur

Sime

Sime Brava Slim BF Manuel

Sime

Sime MURELLE HE 50 R E Manuel utilisateur

Sime

Sime murelle HE 35 R Guide de l'utilisateur

Sime

Sime Brava Slim Series Manuel utilisateur

Sime

Sime MURELLE EV HE 30 Manuel utilisateur

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Viessmann

Viessmann VITODENS 200 Mode d’emploi

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur