SIIG CE-VG0711-SA Manuel utilisateur
1
VGA&RS-232CAT5Extender
with RGB Delay Control
Quick Installation Guide
04-0586A
IntroducingtheVGA&RS-232CAT5Extender
TheVGA& RS-232CAT5e Extenderwith RGBDelay Control
extends VGA and RS-232 signals over 1 CAT5e/6 cable.
FeaturesandBenefits
• Extends VGA and RS-232 signals over one
economical CAT5/5e/6 cable with RGB delay
control
• VGA RGB delay control (de-skew) feature provides
compensation among R,G,B signals over long
transmission
• Supports RS-232 half-duplex
• Adjustable equalization and gain control
• Housing: metal (for better RF shielding)
PackageContents
•VGA& RS-232 CAT5Extender withRGB Delay Control
(one Tx & one Rx unit)
• 2 Power adapters (5V DC)
• Installation kit
• Quick installation guide
2
Layout
Transmitting Unit (Tx) Front View
Figure 1: Front view of Transmitting (Tx) unit
•RS-232:Connectstoa RS-232serial command device
•VGA In: Connects to a VGA input source
TransmittingUnit(Tx) Rear View
RS-232 VGA In
System Out
Power Jack Local VGA
Figure 2: Rear view of Transmitting (Tx) unit
•Power Jack:Connects to 5V DC power adapter
•Local VGA:Connects to a local VGA display
•System Out: Plug in a CAT5e/6 cable, link to the
System In of the receiving (Rx) unit
3
Figure 3: Front view of Receiving (Rx) unit
•RS-232:Connects toa RS-232 serialcommand device
•VGA Out: Connects to a remote VGA display
ReceivingUnit(Rx)RearView
RS-232 VGA Out
ReceivingUnit(Rx)FrontView
System InPower Jack Gain
RGB skew
adjust (-,+)
RGB
selector
EQ
Figure 4: Rear view of Receiving (Rx) unit
•Power Jack: Connects to 5V DC power adapter
•System In: Links to the CAT5e/6 cable from the
System Out of the transmitting (Tx) unit
•EQ: Rotary dial for adjusting signal sharpness
•Gain: Rotary dial for adjusting signal brightness
•RGBselector: Rotarydialfor selectingthe respective
R/G/B color for skew adjustment
4
•RGB skew adjust (-,+): Push button to decrease (-)
or increase (+) skew of the color channel (R/G/B)
chosen by the RGB selector rotary dial
DipSwitch(SerialMode)
The DIP switch is located on the bottom panel of the
receiving unit. See table below for description.
Notes: 1TxD: The 3rd pin of RS-232, which is in charge of
sending data; 2RxD: The 2nd pin of RS-232, which is in
charge of receiving data.
Hardware Installation
1. Power off all devices.
2. Connect your VGA and RS-232 source to the
transmitting unit.
3. Connect your display and RS-232 receiving device
to the receiving unit.
4. Connect your CAT-5/5e/6 LAN cable between the
transmitting and receiving units, make sure the
cable connection is tight and not loose.
5. Plug in the 5V DC power cord to the power jack of
transmitting and receiving units.
Dip Switch Position
Pin#1 Pin#2 Pin#3 Pin#4
Description
ON OFF ON OFF
OFF OFF
ON ON
Master to Slave mode -
TxD of transmitter to RxD of receiver
RxD or transmitter to TxD of receiver
Tx to Rx Extender Mode -
TxD1of transmitter to TxD of receiver
RxD2of transmitter to TxD or receiver
5
6. Power on all devices.
7. If your image is flickering or blinking, adjust the
Gain and EQ knobs to improve the cable skew. It is
suggested to begin by adjusting the EQ first then the
Gain according to the video displayed on the screen.
8. RGBskewadjustfeatureallowsskewcompensation
among red (R), green (G), and blue (B) signals due
to long transmission distance or low quality cabling.
Start by adjusting the RGB selector rotary dial to
choose R/G/B color channel, then use the -or +
RGB skew adjust push buttons to decrease or
increase,respectively,thedelayofthe corresponding
R/G/B color channel.
Notes
1. All transmission distances are measured using
Belden 1583A CAT5e 125MHz Solid UTP cable and
ASTRODESIGN Video Signal Generator VG-859C.
The transmission distance is defined as the distance
between the video source and the VGA display.
2. Transmisson length is affected by the type of CAT5/
6 cables, the type of VGA sources, and the type of
VGA display. Testing results show that solid UTP
cables (normally found in 300m [1000ft] bulk form)
can transmit longer distances than stranded UTP
cables. Shielded STP cables are better suited than
unshielded UTP cables. Solid UTP CAT5e cabling
returns longer tranmission distances than stranded
STP CAT6 cables. For longer transmission distance,
solid UTP/STP cables are your best choice.
3. To reduce the interference among the unshielded
twisted pairs of wires in the LAN cable, you can use
shielded LAN cables to reduce EMI problems.
6
4. For resolution greater than 1080i or 1280x1024, a
CAT6 cable is recommended.
5. Transmission distance depends on the
characteristics and quality of the cables. Higher
resolutions and longer transmission distances
require low skew cables (<25ns/100m) for best
performance. Unshielded CAT6 with metal RJ-45
connectors is recommended.
7
Technical Support and Warranty
QUESTIONS? SIIG’sOnline Support hasanswers! Simply visitour
web site at www.siig.com and click Support. Our online support
database is updated daily with new drivers and solutions. Answers
toyour questionscould bejust afew clicksaway. You can also submit
questions online and a technical support analysts will promptly
respond.
SIIGoffers a 3-year manufacturer warrantywith thisproduct. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased it.
B) Ifyour purchasehas passedthe store'sreturn policyperiod, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. Your RMA request will be processed, if the
product is determined to be defective, an RMA number will be
issued.
Step 2: After obtaining an RMA number, ship the product.
•Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
•Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
VGA & RS-232 CAT5 Extender with RGB Delay Control is a trademark of SIIG, Inc. SIIG and the SIIG
logoareregisteredtrademarksofSIIG,Inc. Allothernamesusedinthispublicationareforidentification
only and may be trademarks of their respective owners.
February, 2010 Copyright © 2009 by SIIG, Inc. All rights reserved.
PRODUCT NAME
VGA& RS-232 CAT5 Extender with RGB Delay Control
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by
adding A/V and Digital Signage connectivity solutions to our extensive
portfolio. Allcentered around the distribution and switching of A/V signals
overCAT5/6,theseproductsincludematrixswitches,distributionamplifiers,
extenders, converters, splitters, cabling, and more.
SIIG is the premier one-stop source of upgrades and is committed to
providing high quality products while keeping economical and competitive
prices. High-quality control standards are evident by one of the lowest
defective return rates in the industry. Our products offer comprehensive
user manuals, user-friendly features, and most products are backed by a
lifetime warranty.
SIIG products can be found in many computer retail stores, mail order
catalogs, and e-commerce sites in the Americas, as well as through major
distributors, system integrators, and VARs.
Table des matières
Autres manuels SIIG Extenseur
SIIG
SIIG AV-GM04A3-S1-IR Manuel utilisateur
SIIG
SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control -... Fiche d'information produit
SIIG
SIIG AV-GM03X3-S1 Manuel utilisateur
SIIG
SIIG CE-H27611-S1 Manuel utilisateur
SIIG
SIIG JU-EX0011-S1 Manuel utilisateur
SIIG
SIIG AV-GM03K3-S1 Manuel utilisateur
SIIG
SIIG AV-GM0403-S1 Series Manuel utilisateur
SIIG
SIIG CE-H23411-S1 Fiche d'information produit
SIIG
SIIG AV-GM04G3-S1-U Manuel utilisateur
SIIG
SIIG AV-GM04D3-S1 Manuel utilisateur
SIIG
SIIG AV-GM04G3-S1 Manuel utilisateur
SIIG
SIIG CE-HM0051-S1 Manuel utilisateur
SIIG
SIIG CE-KV0511-S1 Manuel utilisateur
SIIG
SIIG AV-GM04S3-S1 Series Manuel utilisateur
SIIG
SIIG CE-D20111-S1 Manuel utilisateur
SIIG
SIIG CE-DV0061-S1 Manuel utilisateur
SIIG
SIIG AV-GM02S3-S1 Manuel utilisateur
SIIG
SIIG CE-DV0061-S1 Manuel utilisateur
SIIG
SIIG AV-GM03S3-S1 Manuel utilisateur
SIIG
SIIG CE-H24911-S1 Manuel utilisateur
