SIIG CE-DV0061-S1 Manuel utilisateur
1
Mini DVI Extender
Quick Installation Guide
Introducing the Mini DVI Extender
The Mini DVI Extender extends your DVI transmission
distance up to 30 meters (100ft) thru one CAT-5/5e/6
cable.
Features and Benefits
• DVI 1.1 compliant
• Extendstransmissiondistanceupto30meters(100ft)
from the source at XGA
• Extends transmission distance up to 10 meters (50ft)
from the source at UXGA
• Compact size
• Activity LEDs
Technical Specifications
• Video bandwidth: 1.65Gbps
• Input TMDS signal: 1.2V (peak to peak)
• Input DDC signal: 5V (peak to peak)
• DVI-D connector
• RJ-45 connector
• Dimensions: 50mm (L) x 40mm (W) x 20mm (H)
• Weight: 20g
PackageContents
•Mini DVI Extender (1 transmitter + 1 receiver)
• Quick Installation Guide
04-0494A
2
Hardware Installation
1. Connect the transmitting Mini DVI Extender to
your PC source.
2. Connect the receiving Mini DVI Extender to your
DVI equipped monitor.
3. Connect your CAT-5/5e/6 cable, make sure it is
securely connected with no loose wires.
Notes
1. All transmissions distances are measured with
CAT-5e 125MHz cable.
2. To reduce interferance use shielded CAT-5/5e/6
cables to improve EMI over longer distances.
3. For resolutions greater than 1280 x 1024, CAT-6
cable is recommended.
Safety Precautions
Like all electronic equipment the Mini DVI Extender
should be used with care. Please read and follow the
safetyprecautions to protectyourself from possibleinjury
and minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on the
unit
• Provide proper ventilation and air circulation, do
not use near water
• Keep objects that might damage the device at a safe
distance and assure that the placement of this unit is
on a stable surface
• Do not use liquid or aerosol cleaners to clean this
units.
• Use only the accessories that came with the unit
3
Technical Support and Warranty
QUESTIONS? SIIG’sOnline Support hasanswers! Simply visitour
web site at www.siig.com and click Support. Our online support
database is updated daily with new drivers and solutions. Answers
toyour questionscould bejust a fewclicks away. Youcan alsosubmit
questions online and a technical support analysts will promptly
respond.
SIIGoffers a 2-year manufacturer warranty with this product. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased from.
B) Ifyour purchasehas passedthe store'sreturn policy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
•Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
•Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
MiniDVIExtenderisatrademarkofSIIG,Inc. SIIGandtheSIIGlogoareregisteredtrademarksofSIIG,
Inc. Other names used in this publication are for identification only and may be trademarks of their
respectivecompanies.
August, 2008 Copyright © 2008 by SIIG, Inc. All rights reserved.
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
of I/O connectivity products, including PCIe, PCI & ISA serial and
parallel ports, USB, Serial ATA & UltraATA controllers, FireWire
(1394a/b),networking,sound cards,andother accessories. SIIG isthe
premier one-stop source of upgrades.
SIIGproductsoffer comprehensive usermanuals,many user-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, through major
distributors, system integrators, and VARs in the Americas and the
UK, and through e-commerce sites.
PRODUCT NAME
Mini DVI Extender
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Ph: 510-657-8688
Table des matières
Autres manuels SIIG Extenseur
SIIG
SIIG CE-HM0051-S1 Manuel utilisateur
SIIG
SIIG AV-GM02J3-S1 Manuel utilisateur
SIIG
SIIG CE-KV0511-S1 Manuel utilisateur
SIIG
SIIG CE-D20012-S1 Manuel utilisateur
SIIG
SIIG CE-H24911-S1 Manuel utilisateur
SIIG
SIIG CE-H23T11-S1 Manuel utilisateur
SIIG
SIIG CE-H23411-S1 Fiche d'information produit
SIIG
SIIG AV-GM03W3-S1 Manuel utilisateur
SIIG
SIIG AV-GM02S3-S1 Manuel utilisateur
SIIG
SIIG CE-H26411-S1 Manuel utilisateur
SIIG
SIIG AV-GM04T3-S1 Series Manuel utilisateur
SIIG
SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control -... Fiche d'information produit
SIIG
SIIG JU-EX0111-S1 Manuel utilisateur
SIIG
SIIG AV-GM03T3-S1 Manuel utilisateur
SIIG
SIIG AV-GM04Q3-S1 Manuel utilisateur
SIIG
SIIG CE-H20011-S1 Manuel utilisateur
SIIG
SIIG AV-GM03K3-S1 Manuel utilisateur
SIIG
SIIG AV-GM0463-S1 Manuel utilisateur
SIIG
SIIG CE-D20111-S1 Manuel utilisateur
SIIG
SIIG CE-HM0052-S1 Manuel utilisateur
