SIIG CE-DV0061-S1 Manuel utilisateur
Mini DVI Extender
CE-DV0061-S1
Quick Installation Guide
2
Safety and Notice
The Mini DVI Extender has been tested for conformance to safety regulations and
requirements. However, like all electronic equipment, the Mini DVI Extender should be
used with care. Please read and follow the safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit
Do not attempt to service this unit yourself, except where explained in this manual
Provide proper ventilation and air circulation and do not use near water
Keep objects that might damage the device at a safe distance and assure that the
placement of this unit is on a stable surface
Use only the power adapter and power cords and connection cables designed for this
unit
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning
3
The Mini DVI Extender extends your PC DVI transmission distance up to 30 meters
with maximum resolution of 1024x768x60. With this extender, you can transmit high
quality digital video of PC applications thru one cost effective CAT-5/5e/6 to a remote
monitor or projector, instead of using short and expensive DVI cables. With
embedded EDID inside the adaptor, your PC will continue to send the digital video
signal even when the monitor is not connected. The user can then disconnect the
monitor, place it in a remote location and reconnect it without rebooting the operating
system.
The Mini DVI Extender includes two adapters: one transmitting and one receiving
unit. The transmitting unit is connected to your PC DVI output and the receiving unit
is connected to the monitor. While successfully connected, the two LED lights on
RJ-45 connector will blink. The transmission distance between the sending and
receiving units can be up to 30 meters at XGA and 10 meters at UXGA. With it’s
compact size and requiring no power, the Mini DVI Extender is the best cost effective
choice for bringing your digital video to a remote display.
Introduction
DVI PC DVI monitor
CAT5e cable
4
Features
Package Contents
DVI 1.1 compliant
Extend transmission distance up to 30 meters from the source at XGA
Extend transmission distance up to 10 meters from the source at UXGA
Activity LED lights
Compact size
Mini DVI Extender (1 transmitter + 1 receiver)
Quick Installation Guide
5
Technical Specifications
Video Bandwidth: 1.65 Gbps (DVI 1.1)
Input TMDS signal: 1.2 volts (peak-to-peak)
Input DDC signal: 5 volts (peak-to-peak)
DVI-D Connector
RJ-45 Connector: 2 indication LEDs
Dimensions: 50x 40x 20mm (Lx W x H)
Weight: 20g
6
1. Connect your transmitting DVI extender to your PC source.
2. Connect your receiving DVI extender to your remote DVI equipped monitor.
3. Make sure your CAT-5/5e/6 cable is securely connected with no loose wires.
4. Enjoy your high quality PC video on the extended screen.
Hardware Installation
7
1. All the transmission distances are measured using Belden CAT-5e 125MHz.
2. To reduce the interference among the unshielded twisted pairs of wires in
CAT-5/5e/6 cable, you can use shielded CAT-5/5e/6 cables to improve EMI
problems, which is worsen in the long transmission.
3. The quality of the CAT-5/5e/6 cables is the major factor effecting transmission
distance and signal quality, actual transmission distance depends on the quality of
your CAT-5/5e/6 cable. For resolution greater than 1280x1024, CAT-6 is
recommended.
Notice
8
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analysts will promptly
respond.
SIIG offers a 2-year manufacturer warranty with this product. Please see our web site for
more warranty details. If you encounter any problems with this product, please follow the
procedures below.
A) If it is within the store's return policy period, please return the product to the store where
you purchased from.
B) If your purchase has passed the store's return policy period, please follow these steps
to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If
the product is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All software, cable(s) and any other
accessories that came with the original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will refuse
to accept any shipping package, and will not be responsible for a product returned
without an RMA number posted on the outside of the shipping carton.
• You are responsible for the cost of shipping. Ship the product to the following
address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #: __________________
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
Table des matières
Autres manuels SIIG Extenseur
SIIG
SIIG CE-H21U11-S1 Manuel utilisateur
SIIG
SIIG AV-GM02X3-S1 Manuel utilisateur
SIIG
SIIG AV-GM0473-S1 Manuel utilisateur
SIIG
SIIG AV-GM04G3-S1-U Manuel utilisateur
SIIG
SIIG AV-GM03X3-S1 Manuel utilisateur
SIIG
SIIG AV-GM0413-S1 Manuel utilisateur
SIIG
SIIG CE-HM0051-S1 Manuel utilisateur
SIIG
SIIG AV-GM02S3-S1 Manuel utilisateur
SIIG
SIIG AV-GM02R3-S1 Manuel utilisateur
SIIG
SIIG AV-GM02M3-S1 Series Manuel utilisateur
SIIG
SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control -... Fiche d'information produit
SIIG
SIIG CE-H23T11-S1 Manuel utilisateur
SIIG
SIIG CE-H24B11-S1 Manuel utilisateur
SIIG
SIIG CE-H20211-S1 Manuel utilisateur
SIIG
SIIG CE-H26411-S1 Manuel utilisateur
SIIG
SIIG JU-EX0011-S1 Manuel utilisateur
SIIG
SIIG AV-GM04S3-S1 Series Manuel utilisateur
SIIG
SIIG CE-DV0061-S1 Manuel utilisateur
SIIG
SIIG JU-EX0111-S1 Manuel utilisateur
SIIG
SIIG AV-GM03K3-S1 Manuel utilisateur
