SIIG CyberParallel PCIe Manuel utilisateur
1
CyberParallelPCIe
Quick Installation Guide
04-0422C
Introducing the CyberParallel PCIe
The CyberParallel PCIe high-speed parallel adapter
providesoneadditionalparallelporttoyourPCIExpress
enabled system.
Features and Benefits
•Compliant with PCI Express Base Specification
Revision 1.0a
•PCI Express 1-lane (x1) parallel adapter works with
PCI Express slots with different lane width
•Full support for Windows-based software
•Supports EPP/ECP and SPP (standard) parallel
port modes
System Requirements
•PCI Express enabled system with an available PCI
Express slot
•Windows®7 (32-/64-bit) / Vista (32-/64-bit) / XP
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000
PackageContents
•CyberParallel PCIe adapter
• Spare enhanced low-profile bracket
• Driver CD
• Quick installation guide
2
Parallel Port
Layout
Figure 1. Layout
Hardware Installation
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer’s case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges. Note: For low
profile chassis, remove the full height bracket and install the
enhanced low profile bracket now.
1. Turn OFF the power to your computer and any
other connected peripheral devices.
2. Unplug the power cord and remove the cover from
the computer.
3. Remove the slot bracket from an available PCI
Express slot.
3
4. To install the card, carefully align the card's bus
connector with the selected PCI Express slot on the
motherboard. Push the board down firmly, but
gently, until it is well seated.
5. Replace the slot bracket's holding screw to secure
the card.
6. Replacethecomputercoverandreconnectthe power
cord.
Driver Installation
This section provides information on how to install the
CyberParallel PCIe drivers.
Windows 7 (32-/64-bit)
1. Install the board and boot up Windows.
Note: Windows 7 will automatically search
preconfigured driver folders for the proper driver,
this process may take several minutes to complete.
Do not interrupt this process.
2. Right click Computer, click Manage, click Device
Manager.
3. Insert the driver CD. Right click PCI Parallel Port,
click Update Driver Software.
4. Click Browse my computer for driver software.
5. Type D:, then click Next. (Change D: to match your
CD/DVD-ROM drive letter)
6. At Windows has successfully updated your driver
software, click Close to complete the installation.
Windows Vista (32-/64-bit)
1. Install the board and boot up Windows.
4
2. At the Found New Hardware window, insert the
driver CD, click Locate and install driver software
(recommended), then click Continue.
3. Click Don't search online. Click Next.
4. Click Close to complete the installation.
Windows XP (32-bit ) / Server 2003 (32-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, insert the
driver CD.
For XP w/SP1 or earlier / Server 2003: go to step #2.
For XP w/SP2 or later / Server 2003 w/SP1 or later:
select No, not this time, click Next.
3. Select Install the software automatically
(Recommended,then click Next.
4. Click Finish to complete the installation.
Windows XP (64-bit) / Server 2003 (64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, insert the
driver CD.
For XP: go to step #2.
For XP w/SP1 or later / Server 2003:select No, not this
time, click Next.
3. Select Install the software automatically
(Recommended,then click Next.
4. Click Continue Anyway, then click Finish to
complete the installation.
Windows Server 2008 (32-bit)
1. Install the board and boot up Windows.
5
2. At the Found New Hardware window, click Locate
and install driver software (recommended).
3. Insert the driver CD.
4. Click Don't search online.
5. Click I don't have the disc. Show me other options.
6. Click Browse my computer for driver software
(advanced).
7. Type D:, then click Next. (Change D: to match your
CD/DVD-ROM drive letter)
8. Click Close to complete the installation.
Windows Server 2008 (64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware window, click Locate
and install driver software (recommended).
3. Insert the driver CD.
4. Click I don't have the disc. Show me other options.
5. Click Browse my computer for driver software
(advanced).
6. Type D:, then click Next. (Change D: to match your
CD/DVD-ROM drive letter)
7. Click Close to complete the installation.
Windows 2000
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended), then click Next.
3. Check Specify a location, uncheck the other options
and click Next.
4. Insert the driver CD, type in D:\2000, then click OK.
(Change D: to match your CD/DVD-ROM drive
letter)
6
5. Click Next, then click Finish to complete the
installation.
To Verify Windows Installation
1. Check in Device Manager to verify installation.
For Windows 7: Right click Computer, click Manage,
then click Device Manager.
For Windows Vista: Right click Computer, click
Manage,click Continue,thenclickDeviceManager.
For Windows XP / Server 2003 / 2000: Right click My
Computer, click Manage, click Device Manager.
For Windows Server 2008: Right click Computer, click
Manage,doubleclickDiagnostics,thenclickDevice
Manager.
2. Click on the +(plus sign) in front of Ports (COM &
LPT), and a SIIG CyberPro Parallel port ... should
be displayed.
Changing Parallel Port Number
Some parallel port devices need a specific LPT in order
to function properly. If your device works, do not make
any changes.
1. Right click My Computer, click Manage, then click
Device Manager.
2. Click on the +(plus sign) in front of Ports (COM &
LPT), double click the SIIG CyberPro Parallel port
you want to change.
3. Click the Port Settings tab.
4. Click the down arrow next to the LPT Port Number
box, then select a parallel port that is not in use.
5. Click OK to save the changes.
7
Technical Support and Warranty
QUESTIONS? SIIG’sOnline Support hasanswers! Simplyvisit our
web site at www.siig.com and click Support. Our online support
database is updated daily with new drivers and solutions. Answers
toyour questions could bejust a few clicksaway. You can also submit
questions online and a technical support analysts will promptly
respond.
SIIGoffers alifetime manufacturerwarrantywiththisproduct. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased from.
B) Ifyourpurchase has passed thestore's return policy period,please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. Your RMA request will be processed, if the
product is determined to be defective, an RMA number will be
issued.
Step 2: After obtaining an RMA number, ship the product.
•Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
•Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
CyberParallelPCIeisatrademarkofSIIG,Inc. SIIGandtheSIIGlogoareregisteredtrademarksofSIIG,
Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names
used in this publication are for identification only and may be trademarks of their respective owners.
January, 2010 Copyright © 2010 by SIIG, Inc. All rights reserved.
PRODUCT NAME
CyberParallel PCIe
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by
adding A/V and Digital Signage connectivity solutions to our extensive
portfolio. Allcentered around thedistribution and switchingof A/V signals
overCAT5/6,theseproductsincludematrixswitches, distribution amplifiers,
extenders, converters, splitters, cabling, and more.
SIIG is the premier one-stop source of upgrades and is committed to
providing high quality products while keeping economical and competitive
prices. High-quality control standards are evident by one of the lowest
defective return rates in the industry. Our products offer comprehensive
user manuals, user-friendly features, and most products are backed by a
lifetime warranty.
SIIG products can be found in many computer retail stores, mail order
catalogs, and e-commerce sites in the Americas, as well as through major
distributors, system integrators, and VARs.
Table des matières
Autres manuels SIIG Adaptateur
SIIG
SIIG CyberParallel Dual PCIe Manuel utilisateur
SIIG
SIIG SATA-to-IDE Adapter Manuel utilisateur
SIIG
SIIG CE-H23R11-S1 Manuel utilisateur
SIIG
SIIG JU-AV0012-S1 Manuel utilisateur
SIIG
SIIG USB SoundWave 5.1 Pro Manuel utilisateur
SIIG
SIIG CE-AD0012-S1 Manuel utilisateur
SIIG
SIIG JU-DV0211-S1 Manuel utilisateur
SIIG
SIIG NN26 Series Manuel utilisateur
SIIG
SIIG Cool Dual SATA to USB 2.0 Docking Manuel utilisateur
SIIG
SIIG SC-M20211-S1 Manuel utilisateur
SIIG
SIIG Aluminum Mini DisplayPort 1.2 to VGA Adapter... Manuel utilisateur
SIIG
SIIG SATA-to-IDE Adapter Manuel utilisateur
SIIG
SIIG JU-NE0B11-S1 Manuel utilisateur
SIIG
SIIG CE-HM0021-S1 Manuel utilisateur
SIIG
SIIG 2-Port USB to RS-232 Serial Adapter Manuel utilisateur
SIIG
SIIG RS232 Serial Manuel utilisateur
SIIG
SIIG YN6181 Manuel utilisateur
SIIG
SIIG JU-ACB112-S1 Manuel utilisateur
SIIG
SIIG Wireless-N CardBus Adapter Manuel utilisateur
SIIG
SIIG JU-NE0411-S1 Manuel utilisateur
