SIIG Wireless-N Mini USB Wi-Fi Adapter Manuel utilisateur

Wireless-N Mini USB

Wi-Fi Adapter

Installation Guide

04-0869D

Features and Benefits

•MIMO technology improves data

throughput and range

•Supports2.4GHzWLANnetworksand

complies with IEEE 802.11n/g/b

•Operating distance: up to 300ft indoor

and 900ft open space

•Supports WLAN security with WPA,

WEP (128/64) and WPS

Lot Number Sticker

Forproductreturnorexchange,thisnumber is

required. Keep it for your reference.

Lot Number Part Number

Package Contents

•Wireless-N Mini USB Wi-Fi Adapter

• DriverCD

• Installation guide

System Requirements

•Laptop or desktop computer with an

available USB port

•Windows®

10 (32-/64-bit) /8 (32-/64-

bit) / 7(32-/64-bit) / Vista (32-/64-bit)

/XP(32-/64-bit) /Server 2003 & 2008

(32-/64-bit)/2008R2 /Server2012(32-

/64-bit) /Server 2016

•Mac OS®

X 10.4 to 10.8.x

Layout

Figure1:Layout

Windows Driver Installation

1. Plug in the Wireless-N Mini USB Wi-Fi

Adapter toyourcomputer.

2. ClickClose atthe FoundNewHardware.

Skip this step if not prompted.

3. Insertthe driverCD,clickWindows key

and R, type D:\windows\setup.exe,

then click OK. (Change D:\ to match

yourCD-/DVD-ROM drive letter.)

4. Follow the on-screen instructions to

complete the installation.

Windows Wireless LAN Service

Installation

ForServer 2008and 2008R2 only, pleaseenable

theWireless LAN Service featureafterinstalling

thedriver. ForotherWindows OSes,godirectly

to the REALTEK USB Wireless LAN Utility

section.

1. At the Server Manager, Features, click

Add Features.

2. Check the Wireless LAN Service box,

click Next, then click Install.

3. After installation is done, click Close.

Mac OS Driver Installation

Important:Donot connect the Wireless-N Mini

USB Wi-Fi Adapter to the computer until

instructed to do so.

1. Insert the driver CD, double click

Driver CD icon on the Desktop,

then double click Mac folder.

2. Double click 10.x folder, then

double click Installer.pkg or

Installer.mpkg

Figure 2

Add Features

Wireless LAN Service Next

3. Follow the on-screen instructions to

complete the installation.

4. Restart your computer, then plug the

Wireless-N Mini USB Wi-Fi Adapter to

yourcomputer.

Realtek USB Wireless LAN Utility

Thewindows below are taken fromWindows

OS. For Mac OS, the images will be slightly

different.

1. Double click the utility icon to initiate

theprogram.

2. SelecttheAvailable Network tab,select

yourpreferred network, then click Add

to Profile or Connect.

Figure 3

Add to Profile

Available Network

Associated

3. At the prompted Wireless Network

Properties, type in the Network key,

then click OK.

4. Once the network is connected, the

networkstatus will show Associated or

Connected.

Figure 4

Wi-Fi Protected Setup (WPS)

WPS is an easy way to setup a secure wireless

network with each Windows OS. A WPS

compatible wireless access point (AP) is

required. Insert the PIN code to set up.

Figure 5

Pin Input

1. Launch the REALTEK USB Wireless

LANUtilityand selectthe"Wi-FiProtect

Setup"tab.

2. Make sure the driver has installed and

the adapter is connected. Click Push

Button Config (PBC) on the screen to

initialize the connection.

3. PushthePin Input Config (PIN)button,

then enter the PIN code into your AP's

WPS configuration section.

4. When the devices are communicating,

WPS Protocol Communication will be

displayed.

5. See Figure 4 on page 6 to verify the

connection status as Associated or

Connected.

Figure 6

Blank Page

Table des matières

Autres manuels SIIG Adaptateur

SIIG

SIIG JU-NE0B11-S1 Manuel utilisateur

SIIG

SIIG CE-H23R11-S1 Manuel utilisateur

SIIG

SIIG YN6181 Manuel utilisateur

SIIG

SIIG 2-Port USB to RS-232 Serial Adapter Manuel utilisateur

SIIG

SIIG SC-SA0512-S1 Manuel utilisateur

SIIG

SIIG JU-000071-S1 Manuel utilisateur

SIIG

SIIG JU-VG0311-S1 Manuel utilisateur

SIIG

SIIG US2253 Manuel utilisateur

SIIG

SIIG Wireless-N CardBus Adapter Manuel utilisateur

SIIG

SIIG Aluminum Mini DisplayPort 1.2 to VGA Adapter... Manuel utilisateur

SIIG

SIIG JU-DV0211-S1 Manuel utilisateur

SIIG

SIIG CyberParallel Dual PCIe Manuel utilisateur

SIIG

SIIG PCI Express Serial Manuel utilisateur

SIIG

SIIG USB SoundWave 5.1 Pro Manuel utilisateur

SIIG

SIIG USB-to-PS/2 Manuel utilisateur

SIIG

SIIG Cool Dual SATA to USB 2.0 Docking Manuel utilisateur

SIIG

SIIG Universal DC Power Adapter - 90W Manuel utilisateur

SIIG

SIIG CE-HM0021-S1 Manuel utilisateur

SIIG

SIIG CE-AD0012-S1 Manuel utilisateur

SIIG

SIIG ID-SB0111-S1 Fiche d'information produit

SIIG

SIIG CN2502 Manuel utilisateur

SIIG

SIIG JU-H20511-S1 Manuel utilisateur

SIIG

SIIG JU-ACB112-S1 Manuel utilisateur

SIIG

SIIG PCIe to ExpressCard Adapter Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur