Siemens SIMATIC HMI TP 170A Document technique

Preface, Contents

Introduction 1

Functionality 2

Commissioning 3

Operating the TP 170A 4

Operation of Screen Objects 5

System Settings 6

Installation 7

Unit Description 8

Maintenance/Upkeep 9

Operating System Update 10

Appendices A

Glossary, Index

Release 12/99

6AV6591–1DC11–0AB0

Touch Panel

TP 170A

Equipment Manual

SIMATIC HMI

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Index-2 TP170AEquipmentManual

Release12/99

!Warning

indicatesthat death, severepersonal injury orsubstantial property damagecanresult if proper precau-

tions are not taken.

!Caution

indicatesthat minorpersonal injuryor propertydamage can result if proper precautions are not taken.

Note

drawsyour attention toparticularly important informationon the product,handling the product,or to a

particularpartofthedocumentation.

Qualified Personnel

Equipmentmay be commissioned and operatedonly by qualifiedpersonnel.Qualifiedpersonnelwithin

the meaning of the safety notices in this manual are persons who are authorized to commission, ground

andidentifyequipment, systems andcircuits in accordance withsafety engineering standards.

Correct Usage

Notethefollowing:

!Warning

Theequipment may be used only for the applications stipulated in the catalog and in the technical descrip-

tionandonly in conjunctionwithother equipment andcomponentsrecommended or approvedbySie-

mens.

Startup must not take place until it is established that the machine, which is to accommodate this compo-

nent,isinconformitywith the guideline 89/392/EEC.

Faultlessandsafeoperationoftheproductpresupposespropertransportation,properstorage,erection

andinstallationaswellascarefuloperationandmaintenance.

Trademarks The registered trademarks of Siemens AG are listed in the Preface.

Someof the other designations used in these documents are also registered trademarks; the owner’s

rights may be violated if they are used be third parties for their own purposes.

Impressum Editor and Publisher: A&D PT1 D1.

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protectthe product and connectedequipment. These noticesare highlighted inthe manual bya warning

triangle and are marked as follows according to the level of danger:

We have checked the contents of this manual for agreement with the hard-

wareandsoftwaredescribed.Sincedeviationscannotbeprecludedentirely,

we cannot guarantee full agreement. However, the data in this manual are

reviewed regularly and any necessary corrections included in subsequent

editions.Suggestions for improvement are welcomed.

The reproduction, transmission or use of thisdocument or its contentsis not

permitted without express written authority. Offenders will be liable for

damages.Allrights,includingrightscreatedbypatent grant orregistrationof

an utility model or design, are reserved.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Bedienenund Beobachten

Postfach 4848, D-90327 Nuernberg SiemensAG 1999

Technical data subject to change.

SiemensAktiengesellschaft Order no: 6AV6591–1DC11–0AB0

CuuDuongThanCong.com https://fb.com/tailieudientucntt

TP170AEquipmentManual

Release12/99

Preface

This manual

The TP 170A equipment manual is part of the SIMATIC HMI documentation. It

provides operation, installation, configuration and system personnel with

information concerning installation, functionality, operation and technical design of

the TP 170A.

An overview of the entire SIMATIC HMI documentation is provided in Appendix E.

Organization of the manual

The TP 170A equipment manual is organized into the following chapters:

Chapter Contents

1 - 2 Overview of features and functional scope of the TP 170A.

3 - 6 Commissioning, operation and system settings.

7 - 9 Mechanical and electrical installation, unit description, as well as

maintenance and upkeep of the TP 170A.

10 Information on the operating system update.

Appendix Technical Data

Interface Assignments

System Messages

ESD Guidelines

SIMATIC HMI Documentation

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Preface

ii TP170AEquipmentManual

Release12/99

Conventions

The following conventions are used throughout this manual:

Motor off Text in the operating unit display is presented in this

typewriter font.

Tag

Symbolic names representing tag values on the screen are

presented in this italic typewriter font.

Screens

Functions available for selection are presented in this italic

font.

ESC The names of keys and buttons are displayed in a different

font.

History

The various releases of this manual correspond to the following versions of the

ProTool configuration software:

Release Comment ProTool version

12/99 First release of the TP 170A equipment

manual. From Vers. 5.2

Trademarks

The following names are registered trademarks of the Siemens AG:

SSIMATICR

SSIMATIC HMIR

SHMIR

SProToolR

SProTool/LiteR

SProTool/ProR

SSIMATIC Multi PanelR

SSIMATIC Multifunctional PlatformR

SMP 270R

SProAgentR

Other support

In the case of technical queries, please contact the Siemens representatives in the

subsidiaries and branches responsible for your area.

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Preface

iii

TP170AEquipmentManual

Release12/99

SIMATIC Customer Support Hotline

Available worldwide, at all times:

Johnson City

Nuernberg

Singapur

SIMATIC Basic Hotline

Nuernberg Johnson City Singapur

SIMATIC BASIC Hotline SIMATIC BASIC Hotline SIMATIC BASIC Hotline

Localtime Mo - Fr 7:00 to 17:00 Localtime Mo - Fr 8:00 to 19:00 Localtime Mo - Fr 8:30 to 17:30

Telephone: +49(911)895-7000 Telephone: +1423461-2522 Telephone: +65740-7000

Fax: +49(911)895-7002 Fax: +1423461-2231 Fax: +65740-7001

E-Mail: simatic.support@

nbgm.siemens.de E-Mail: simatic.hotline@

sea.siemens.com E-Mail: simatic.hotline@

sae.siemens.com

SIMATIC Premium Hotline

(charged,only with SIMATICCard)

Time: Mo - Fr 0:00 to 24:00

Telephone: +49(911)895-7777

Fax: +49(911)895-7001

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Preface

iv TP170AEquipmentManual

Release12/99

SIMATIC Customer Online Services

SIMATIC Customer Support offers comprehensive additional information

concerning SIMATIC products through its Online services as follows:

Up-to-date general information is provided

– in Internet under http://www.ad.siemens.de/simatic

– via the Fax-Polling under 08765–93 02 77 95 00

Up-to-date product information and downloads for practical use can be found:

– in Internet under http://www.ad.siemens.de/support/html–00/

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Preface

TP170AEquipmentManual

Release12/99

Abbreviations

The abbreviations used in this equipment manual have the following meaning:

AG (PLC) Programmable Logic Controller

ANSI American National Standards Institute

AS 511 Protocol of the PU interface to SIMATIC S5

ASCII American Standard Code for Information Interchange

CCFL Cold Cathode Fluorescence Lamp

CF Compact Flash

CPU Central Processing Unit

DIL Dual-In-Line

DP Decentralized Periphery

EM Event Message

EMC Electromagnetic Compatibility

EPROM Electric Programmable Read Only Memory

ESD Electrostatic Sensitive Device

HMI Human Machine Interface

IF Interface

LCD Liquid Crystal Display

LED Light Emitting Diode

MPI Multipoint Interface (SIMATIC S7)

OP Operator Panel

PC Personal Computer

PLC Programmable Logic Control

PPI Point to Point Interface (SIMATIC S7)

PU Programming Unit

RISC Reduced Instruction Set Computing

SRAM Static Random Access Memory

STN Super Twisted Nematic

TP Touch Panel

TTL Transistor–Transistor Logic

A list of all the specialist terms together with their explanations is provided in the

Glossary at the end of this manual.

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Preface

vi TP170AEquipmentManual

Release12/99

CuuDuongThanCong.com https://fb.com/tailieudientucntt

vii

TP170AEquipmentManual

Release12/99

Contents

1 Introduction 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Functionality 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Commissioning 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Initial Startup 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Recommissioning 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3 Download Mode Options 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4 Test Configuration 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Operating the TP 170A 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 Operating Touch Elements 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Entering Values 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3 Operating Screens 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Operation of Screen Objects 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Overview of Screen Objects 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2 Status Button 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Messages 5-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.4 Logging On and Off from the Operating Unit 5-7. . . . . . . . . . . . . . . . . . . . . . . .

6 System Settings 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1 Setting an Operating Mode 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 Screen Settings 6-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 Installation 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.1 Mechanical Installation 7-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2 Electrical Installation 7-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2.1 Connect Configuration Computer 7-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2.2 Connect PLC 7-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8 Unit Description 8-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.1 Dimensions 8-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.2 Connection Elements 8-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.3 Communication Options 8-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Contents

viii TP170AEquipmentManual

Release12/99

9 Maintenance/Upkeep 9-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 Operating System Update 10-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendices

A Technical Data A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B Interface Assignment B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C System Messages C-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D ESD-Guidelines D-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E SIMATIC HMI Documentation E-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CuuDuongThanCong.com https://fb.com/tailieudientucntt

Table des matières

Autres manuels Siemens Écran tactile

Siemens

Siemens SIMATIC PC 670 Document technique

Siemens

Siemens POL8T2.40/STD Manuel de l'opérateur

Siemens

Siemens Simatic PC Panel PC 870 Document technique

Siemens

Siemens UP 588 Manuel utilisateur

Siemens

Siemens POL8T5.70/STD Manuel de l'opérateur

Siemens

Siemens SIMATIC INOX Series Guide de l'administrateur

Siemens

Siemens SIMATIC 677 Manuel utilisateur

Siemens

Siemens Simatic PC Panel PC 870 Document technique

Siemens

Siemens GAMMA instabus UP 588/12 Manuel de service

Siemens

Siemens SIMATIC WinCC V11 Guide de l'utilisateur

Siemens

Siemens Climatix POL8T1.4X/STD Manuel de l'opérateur

Siemens

Siemens Simatic PC Panel PC 870 Document technique

Siemens

Siemens SIMATIC HMI series Manuel utilisateur

Siemens

Siemens SIMATIC HMI TP1200 Comfort Manuel utilisateur

Siemens

Siemens 5WG1205-2AB21 Manuel utilisateur

Siemens

Siemens SIMATIC HMI Manuel utilisateur

Siemens

Siemens SIMATIC HMI TP 070 Document technique

Siemens

Siemens SIMATIC LS120 Manuel utilisateur

Siemens

Siemens Desigo Touch Series Manuel d'installation et d'exploitation

Siemens

Siemens SIMATIC SCD1900 Manuel utilisateur

Siemens

Siemens ZIC-8B Manuel utilisateur

Siemens

Siemens TP27 Document technique

Siemens

Siemens SIMATIC TP 270 Manuel utilisateur

Siemens

Siemens SIMATIC TP900 Comfort INOX PCT Guide de l'administrateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur