Siemens RDH10RF/SET Manuel utilisateur

CE1N3070en

01.03.2010 Building Technologies

3070

RDH10RF RCR10/433

Wireless room temperature

controller with LCD RDH10RF/SET

Non-programmable, for heating or cooling systems

•Operating modes: Automatic, Comfort, Energy Saving, and Frost Protection

•LCD-Display 50 x 45 (W x H)

•RDH10RF transmitter, battery-powered

•RCR10/433 receiver, mains powered

•Communication of the set is bonded ex factory

Use

The RDH10RF is used to control the room temperature in heating or cooling systems.

Typical applications:

•Homes

•Residential buildings

•Schools

•Offices

The controller can be used together with the following equipment:

•Thermal valves or zone valves

•Combi boilers

•Gas or oil burners

•Fans

•Pumps

2/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Functions

The controller acquires the room temperature with its integrated sensor.

Q14

T[°C]

OFF W

3031D01

T Room temperature

SD Switching differential (1 K)

W Room temperature setpoint

L1 Output signal for heating

T[°C]

OFF

3011D02

T Room temperature

SD Switching differential (1 K)

W Room temperature setpoint

L2 Output signal for cooling

The RDH10RF provides room temperature control only.

The digital display displays the actual room temperature and the comfort temperature

setpoint. The triangle symbol appears when the heating output is active.

Setpoints and information required for operating mode changeover are retained when

exchanging batteries. The values must be checked though.

Ordering

Please provide the name and product number when ordering: Room temperature con-

troller RDH10RF/SET.

Valves and actuators are to be ordered as separate items.

Equipment combinations

Type of unit Product number Data sheet

Electromotoric actuator SFA21... 4863

Electrothermal actuator (for radiator valves) STA21... 4877

Electrothermal actuator (for small valves 2.5 mm) STP21... 4878

2- or 3-port zone valve MXI/MVI421… 4867

Electromotoric actuator for zone valves V..146.. SUA21 4830

Electric actuator SUA11/22 4832

Air damper actuator GDB… 4624

Air damper actuator GSD/GQD… 4606

Air damper actuator GXD… 4622

Function diagram

Temperature sensor

Display

Backup

3/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Mechanical design

The controller consists of 4 parts:

•Plastic housing with digital display accommodating the electronics, operating ele-

ments and built-in room temperature sensor

•Baseplate (mounting base)

•Removable battery compartment

•Fold-out stand

The housing engages in the baseplate and snaps on. There is a reset button on the

rear of the unit.

1 Room temperature display in °C

2 Indicates a heat request

3 Temperature setting knob

4 Battery compartment

5 Comfort temperature setpoint

6 RF

TEST Indicates RF signal test

7 Indicates low battery power; replace batteries

Key

4/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Mechanical design

The RCR10/433 receiver is located in a plastic housing with LEDs and buttons.

Signal display LED

OVERRIDE button

LEARN button

Relay display LED

OVERRIDE & LEARN

button together = RESET

function

RCR10/433

The RDH10RF is located in a plastic housing. Two buttons are visible on the rear side

when removing the baseplate.

Test button

Learn button

Test & Learn buttons to-

gether = RESET function

RDH10RF

5/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Notes

Mount the room temperature controller in a location where the air temperature can be

measured as accurately as possible without being adversely affected by direct solar

radiation or other sources of heat or cooling.

The controller is delivered with a fold-out stand and may be used as a "mobile" device

(Note: Pay attention to mounting location).

Mounting height is approximately 1.5 m above the floor.

The unit can be fitted to a recessed conduit box.

Fix the baseplate prior to mounting the controller. The receiver does not require a

baseplate. Connect the electrical connections and fit and secure the receiver in compli-

ance with local regulations (also refer to the separate mounting instructions).

Mount the controller on a flat wall.

If there are thermostatic radiator valves in the reference room, set them to their fully

open position.

For commissioning please refer to the Operating Instruction CE1B3070xx

Controller and receiver are maintenance-free except for the controller battery.

If battery symbol appears, the batteries are almost empty and must be replaced.

Simultaneously press the TEST and LEARN buttons on the rear side of the controller to

reset it (reset function).

Simultaneously press the OVERRIDE and LEARN buttons to reset the receiver (reset

function).

All individual settings are reset to the default values.

Mounting, installation

and commissioning

Maintenance

Change of batteries

Reset

6/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Override allows for temporarily overwriting the active value from the sender.

Override responds differently depending on the radio connection (normal or fault).

Example A: Normal connection between sender and recipient

Press the OVERRIDE button to overwrite the value for ca. 14 minutes. The value

then returns to the setpoint.

Example B: Faulty connetion between sender and recipient

Press the OVERRIDE button to permanently overwrite the value. The value

returns to the setpoint after the connection between sender and recipient works

again.

RF state RF LED

Power up (First 5 seconds) Flash RED + GREEN (Amber)

(5 seconds)

Power up (After 5 seconds) RED

Press OVERRIDE switch Flash RED + GREEN (Amber)

(5 seconds)

Learning period No LED

Software reset RED

RF receive GREEN

No RF within last 25 minutes RED

Manual override

(RF receive)

Flash GREEN

Manual override

(No RF receive)

Flash RED

Relay state Relay LED

From OUT to ON (First 5 seconds) Flash YELLOW

ON YELLOW

From ON to OFF (After 5 seconds) Flash YELLOW

OFF OFF

OVERRIDE

RF LED

Relay LED

7/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Technical data

Operating voltage DC 3 V (2 x 1.5 V AA alkaline batteries)

Battery life >1 year (AA alkaline batteries)

Internal:

Thermistor 10 kΩ± 1% at 25 °C

Switching differential SD 1 K (fixed)

Setpoint setting range 5…30 °C

Factory setting comfort setpoint 20 °C

Resolution of settings and displays

Setpoints 0.5 °C

Actual value displays 0.5 °C

Operation IEC 721-3-3

Climatic conditions Class 3K5

Temperature 0…+40 °C

Humidity <90% r.h.

Transport IEC 721-3-2

Climatic conditions Class 2K3

Temperature -25…+60 °C

Humidity <95% r.h.

Mechanical conditions Class 2M2

Storage IEC 721-3-1

Climatic conditions Class 1K3

Temperature -10…+60 °C

Humidity <90% r. h.

conformity to

EMC directive 2004/108/EC

Low-voltage directive 2006/95/EC

Radio equipment 1999/5/EC

N 474C-tick conformity to

Test standards and requirements EN 61000-6-3, AS/NZS 4251.1: 1999

Test standards for radio equipment AS/NZS 4268: 2003

Product safety

Automatic electrical controls for EN 60 730-1 and

household and similar use EN 60 730-2-9

Information technology equipment -

Safety - General Requirements EN 60950-1

Generic standards - Compliance to

lower power electronic apparatus EN 50371-1

Electromagnetic compatibility and radio

spectrum matters–Short range devices EN 300220-3 V1.1.1

Electromagnetic compatibility and radio

spectrum matters – EMC EN 301489-3 V1.4.1

Safety class III as per EN 60950-1

Pollution degree 2

Degree of protection of housing IP20

Weight (incl. package)

RDH10RF/SET 515 g

Color of housing front Signal-white RAL 9003

Housing material ABS (LCD lens: PC)

Power supply

Sensor inputs

Operational data

Environmental conditions

Standards

General

8/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Receiver RCR10/433

Operating voltage

Power

AC 230 V +10/−15%

<10 VA

Frequency 50...60 Hz

Switching capacity of relays

Voltage

Current

AC 24...250 V

8 (3) A

Relay contacts

Switching voltage Max. AC 250 V

Min. AC 24 V

Switching current Max. 8 A res., 3 A ind.

At AC 250 V Min. 200 mA

Contact life at AC 250 V Guide value:

At 5 A res. 1 x 105cycles

Insulating strength

Between relay contacts and coil AC 5,000 V

Between relay contacts (same pole) AC 2,500 V

Connection terminals Screw terminals

For solid wires 2 x 1.5 mm2

For stranded wires 1 x 2.5 mm2(min. 0.5 mm2)

Operation

Climatic conditions

Temperature

Humidity

IEC 60 721-3

Class 3K3

0...+45 °C

<85% r.h.

Storage and transport

Climatic conditions

Temperature

Humidity

Mechanical conditions

IEC 60 721-3

Class 2K3

−25...+70 °C

<93% r.h.

Class 2M2

conformity

EMC directives

Low-voltage directives

Radio equipment

2004/108/EC

2006/95/EC

1999/5/EC

Product safety

Automatic electrical controls for EN 60 730-1 and

household and similar use EN 60 730-2-9

Information technology equipment -

Safety - General Requirements EN 60950-1

Generic standards - Compliance to

lower power electronic apparatus EN 50371-1

Electromagnetic compatibility and radio

spectrum matters–Short range devices EN 300220-3 V1.1.1

Electromagnetic compatibility and radio

spectrum matters – EMC EN 301489-3 V1.4.1

Approval

In the following countries

All ECC countries,

Norway, Iceland and Switzerland

Safety class

Degree of pollution

II as per EN 60 730

Color

Unit front

Base

Signal-white RAL 9003

Gray RAL 7035

Dimensions 83x104x32 mm

General unit data

Outputs

Switching outputs

(LX, L1, L2)

Electrical connections

Environmental conditions

Standards

9/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Connection diagram

L Live, AC 230 V

Lx Live, AC 24…250 V

L1 N.O. contact, AC 24…250 V / 8 (3) A

L2 N.C. contact, AC 24…250 V / 8 (3) A

M1 Circulating pump

N Neutral conductor

Nx Neutral conductor

N2 Receiver RCR10/433

Y1 Actuating device

L – N AC 230 V / Lx – Nx AC 24…250 V

Application examples

Wireless room temperature controller with

receiver control of a gas-fired wall-hung

boiler

Wireless room temperature controller with

receiver control of atmospheric gas burner

2252S04

TN1

2255S05

Wireless room temperature controller with

receiver control of a heating circuit pump

(precontrol by manual mixing valve)

Wireless room temperature controller with

receiver control of cooling equipment

F1 Thermal reset limit thermostat

F2 Safety limit thermostat

M1 Circulating pump

E1 Cooling equipment

N1 Room temperature controller RDH10RF

N2 Receiver RCR10/433

Y1 3-port valve with manual adjustment

Y2 Magnetic valve

10/12

Siemens Room temperature controllers CE1N3070en

Building Technologies 01.03.2010

Dimensions

Room temperature

controller

Room temperature

controller mounting

plate

Room temperature

controller with fold-

out stand

Autres manuels pour RDH10RF/SET

Table des matières

Autres manuels Siemens Régulateurs de température

Siemens

Siemens REA23 Manuel utilisateur

Siemens

Siemens RDF300 Series Manuel de l'opérateur

Siemens

Siemens REA23.03RF Manuel utilisateur

Siemens

Siemens RDD10 Series Manuel utilisateur

Siemens

Siemens QAA2290.EWSC Manuel utilisateur

Siemens

Siemens REV23RF16A Manuel utilisateur

Siemens

Siemens AVS13.399 Manuel utilisateur

Siemens

Siemens QAA910 Manuel utilisateur

Siemens

Siemens HEATWELL RDE Series Manuel de l'opérateur

Siemens

Siemens RLA162 Manuel utilisateur

Siemens

Siemens RLM162 Manuel utilisateur

Siemens

Siemens RVL482 Manuel utilisateur

Siemens

Siemens RDE10.1DHW Manuel utilisateur

Siemens

Siemens RDJ10RF/SET Manuel utilisateur

Siemens

Siemens RDE10 Series Manuel utilisateur

Siemens

Siemens HZ39050 Manuel utilisateur

Siemens

Siemens SITRANS Series Guide de l'administrateur

Siemens

Siemens REV23.03RF Manuel utilisateur

Siemens

Siemens RLE132 Manuel utilisateur

Siemens

Siemens QAA73 Manuel utilisateur

Siemens

Siemens REV23 Manuel utilisateur

Siemens

Siemens QAX910 Manuel utilisateur

Siemens

Siemens RLA162 Manuel utilisateur

Siemens

Siemens SITRANS TS Series Manuel utilisateur

Manuels Régulateurs de température populaires d'autres marques

Swegon

Swegon LUNAd MB Manuel utilisateur

Lucky Reptile

Lucky Reptile Thermo Control II Manuel utilisateur

SENSORMETRIX

SENSORMETRIX Argon 100 Manuel utilisateur

Fuji Electric

Fuji Electric PXE4 Manuel utilisateur

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuel utilisateur

Selec

Selec TC544C Manuel utilisateur

P.W. KEY

P.W. KEY rt-208gt Manuel utilisateur

Future Design

Future Design FDC-9200 Manuel utilisateur

BH Thermal

BH Thermal BriskONE Manuel utilisateur

Omron

Omron E5EX-H Manuel utilisateur

West Control Solutions

West Control Solutions KS 45 Guide de démarrage rapide

MCS

MCS RITC-15B Manuel utilisateur

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuel utilisateur

eltherm

eltherm Ex-TC It Series Manuel utilisateur

Omron

Omron C200H-TV Series Manuel utilisateur

industrie technik

industrie technik CA1 Manuel utilisateur

KRAL

KRAL EET 32 Manuel utilisateur

dixell

dixell XR420C Schéma de câblage