Siemens SINAMICS DCM Instructions de montage
Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY
Document order number: A5E34871844B
Ⓟ
03/2021 Subject to change
Copyright © Siemens AG 2015 - 2021.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Mounting kit to increase the degree of protection to IP20
Hardware Installation Manual, 02/2021, A5E34871844B 3
Preface
DANGER
Failure to observe the general safety instructions and residual risks
If the general safety instructions and remaining risks are not observed, accidents can occur
involving severe injuries or death.
•Comply with the general safety instructions in Chapter 1 of the SINAMICS DCM DC
Converter Operating Instructions.
•Take special care to ensure that the unit is brought into a no-voltage condition and
locked out before carrying out any work.
Note
If you want additional information or if exceptional problems arise that are not addressed in
sufficient detail in this Hardware Installation Manual, you can request the required
information from your local Siemens office.
We would also like to point out t
hat the contents of this Hardware Installation Manual are
neither part of nor modify any prior or existing agreement, commitment or contractual
relationship. The Purchase Agreement contains the complete and exclusive obligations of
Siemens, including the w
arranty provisions. Any statements contained in this Hardware
Installation Manual neither expand nor restrict the scope of these contractual warranty
conditions.
Service
You can find information on our services and regional contact persons in the Internet -
(https://support.industry.siemens.com/sc/ww/en/sc)
Technical Support
Our technical support can provide you with technical assistance for products, systems, and
solutions:
Service (https://support.industry.siemens.com/sc/ww/en/sc)
Preface
Mounting kit to increase the degree of protection to IP20
4Hardware Installation Manual, 02/2021, A5E34871844B
Central hotlines for SINAMICS DCM technical support
European and African time
zone
Service Request
(https://support.industry.siemens.com/My/ww/en/requests#create
Request)
America time zone
24-hour hotline: +1 800 333 7421
Tel.: +1 423 262 2960
Fax: +1 423 262 2200
email (mailto:support.america.automation@siemens.com)
8:00 to 17:00
Eastern Standard Time
Asia/Australia time zone
Tel.: +86 1064 757575
Fax: +86 1064 747474
7:30 to 17:30
Beijing local time
SINAMICS DCM documentation available
SINAMICS DCM DC Converters Operating Instructions
contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM Control Modules Operating Instructions
contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM List Manual (for DC converters and control modules)
Contains
parameter list, function diagrams, list of faults and alarms
SINAMICS free function blocks, function description
Includes a general description, list of parameters, the function block diagrams as well as
the list of faults and alarms.
Manuals and application notes on the Internet
The manuals and application documents are also available in the Internet:
Manuals (https://support.industry.siemens.com/cs/ww/en/ps/13298/man)
The list of general conditions available there include current supplements to the manuals.
The notes included in the general condition lists have a higher priority than the statements
made in the manuals.
Mounting kit to increase the degree of protection to IP20
Hardware Installation Manual, 02/2021, A5E34871844B 5
Table of contents
Preface ................................................................................................................................................... 3
1 Ordering data ........................................................................................................................................ 7
2 Description............................................................................................................................................. 9
3 Assembling .......................................................................................................................................... 13
4 (Type) test............................................................................................................................................ 17
A Appendix ............................................................................................................................................. 19
Table of contents
Mounting kit to increase the degree of protection to IP20
6Hardware Installation Manual, 02/2021, A5E34871844B
Mounting kit to increase the degree of protection to IP20
Hardware Installation Manual, 02/2021, A5E34871844B 7
Ordering data
1
Table 1- 1 Ordering data
Article
Article number
Mounting kit to increase the degree of protection to IP20 for 15 A to 30 A units
6RX1800-0MA00
Mounting kit to increase the degree of protection to IP20 for 60 A to 280 A units
6RX1800-0MA01
Mounting kit to increase the degree of protection to IP20 for 400 A to 600 A units
6RX1800-0MA02
Mounting kit to increase the degree of protection to IP20 for 720 A to 850 A units
6RX1800-0MA03
The mounting kits are supplied packed in a cardboard box. A product packaging label is
attached to the cardboard box.
Avoid heavy vibration and severe shocks during transportation, e.g. when the cabinet is
lowered into position.
Follow the instructions on the packaging concerning transportation, storage, and proper
handling.
If you discover any damage that has occurred in transit, please inform your shipping agent
immediately.
The packaging can be disposed of in accordance with local regulations for cardboard
packaging.
Ordering data
Mounting kit to increase the degree of protection to IP20
8Hardware Installation Manual, 02/2021, A5E34871844B
Autres manuels pour SINAMICS DCM
9
Table des matières
Autres manuels Siemens Support et étagère
Siemens
Siemens 3KX3 Manuel utilisateur
Siemens
Siemens MXL Series Instructions de montage
Siemens
Siemens 8PQ9801-0AA08 Manuel utilisateur
Siemens
Siemens Actavix ASK33 Manuel utilisateur
Siemens
Siemens CAB-MP Manuel utilisateur
Siemens
Siemens 8PQ9802-7AA11 Manuel utilisateur
Siemens
Siemens FDM275-O Manuel utilisateur
Siemens
Siemens 8PQ9800-3AA80 Manuel utilisateur
Siemens
Siemens 8MF1 Series Manuel utilisateur
Siemens
Siemens SIRIUS 3TX7680-1B Manuel utilisateur
Siemens
Siemens 8PQ9801-0AA00 Manuel utilisateur
Siemens
Siemens MBR-MP Manuel utilisateur
Siemens
Siemens CHBA221 Series Manuel utilisateur
Siemens
Siemens 3VL/3VA Manuel utilisateur
Siemens
Siemens d1000 Manuel utilisateur
Siemens
Siemens 3AS110B Manuel utilisateur
Siemens
Siemens KNX GAMMA AP 258E11 Manuel utilisateur
Siemens
Siemens 8MF1 2AS30 Series Manuel utilisateur
Siemens
Siemens FHA2031-U1 Manuel utilisateur
Siemens
Siemens 8PQ9801-5AA26 Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
