Siemens MOD-16 Manuel utilisateur

P/N 315-090830-8

Installation Instructions

Model MOD-16

Output Driver

INTRODUCTION

The Model MOD-16 MXL Output Driver from

Siemens Industry, Inc. is an annunciator driver

that activates up to 16 outputs.

The Model MOD-16 is controlled by the MOI-7

module (See P/N 315-092799). Up to eight

MOD-16s can be used with an MOI-7.

OPERATION

Each MOD-16 activates any of its 16 program-

mable outputs for LEDs or for 24V lamps. The

selection of either the desired LEDs or the 24V

lamps is made at 16 positions on dipswitches S1

and S2 (See Figure 1).

If LEDs are used, open all dipswitches in S1

and S2 to provide for current limiting. Opening

a dipswitch (OFF position) inserts a 2.7K ohm

resistor in series with the output.

If 24V lamps or the SR-35 are used, close all the

dipswitches. Closing a dipswitch (ON position)

eliminates the 2.7K ohm limiting resistor.

CAUTION: PROPER SETTING OF THE DIP-

SWITCH IS NECESSARY TO

PREVENT CIRCUIT DAMAGE.

For additional information on the MXL/MXLV

System, refer to the MXL/MXLV Manual,

P/N 315-092036.

INSTALLATION

Remove all system power before installation,

first battery and then AC. (To power up, first

connect the AC and then the battery.)

1. Mount the MOD-16 in one module space on a

System 3 type rail using the four screws

provided.

2. Connect the MOD-16 to the MOI-7 with the

10-position ribbon cable P/N 555-190940

provided with the MOI-7.

3. If a connection to a MOD-16 module on

another rail is required, use the optional

cable P/N 555-190941.

ELECTRICAL RATINGS

Terminal voltage: 40V peak maximum

Maximum current for each output: 50mA

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Building Technologies, Ltd.

Fire Safety & Security Products

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 Canada

tnerruCeludoMCDV5evitcAAm2

tnerruCeludoMCDV42evitcA Am05+Am0 detcennocrep tuptuo

tnerruCeludoMCDV42ybdnatSAm

NOTES:

1. 18 AWG minimum for LED and 24V

lamp connections.

2. 14 AWG minimum for supply connec-

tions (TB1-9 and 10, TB2-9 and 10).

3. All wiring must be in accordance with

NEC 760.

4. All wiring must conform to local codes

and to the authority having jurisdiction

over the installation.

5. All wiring to MOD-16 is unsupervised

and must not leave enclosure.

6. For additional information see MOI-7

Module instructions, P/N 315-092799.

7. A maximum of 8 MOD-16s can be

used with the MOI-7.

8. When using SR-35, refer to Table 1.

9. Both TB1-9 (or 10) and TB2-9 (or 10)

must be connected to the common of

the power supply.

P/N 315-090830-8

Figure 1

Wiring Connection

TABLE 1

Connection to SR-35 Module*

Note: When using SR-35 with MOD-16, jumpers

P1-P8 on SR-35 must be in position B.

MOD-16 SR-35 Screw Termina

TB1-1 4

TB1-2 8

TB1-8 32

To PSR-1, TB3-1, or to

PS-35, TB1-5 33

To PSR-1, TB3-2, or to

PS-35, TB1-6 35

*For additional information see:

SR-35 Instructions (P/N 315-087691)

PS-35 Instructions (P/N 315-085062)

PSR-1 Instructions (P/N 315-090911)

Autres manuels Siemens Unité de contrôle

Siemens

Siemens FC1008-A Manuel

Siemens

Siemens PS-35 Manuel utilisateur

Siemens

Siemens SINAMICS G120 Guide de l'administrateur

Siemens

Siemens FDK:085U0321 Manuel utilisateur

Siemens

Siemens LMV52 series Manuel utilisateur

Siemens

Siemens MOBY I ASM 421 Manuel de la liste des pièces

Siemens

Siemens OMM-1 Manuel utilisateur

Siemens

Siemens VVI46 Series Manuel utilisateur

Siemens

Siemens Simatic Net Scalance M812 Manuel utilisateur

Siemens

Siemens HLIM Manuel de service

Siemens

Siemens SITRANS RD500 Manuel utilisateur

Siemens

Siemens SIPROTEC 7VE61 Manuel utilisateur

Siemens

Siemens Siprotec DNP3 IP Manuel d'utilisation et d'entretien

Siemens

Siemens Simatic S7-1500 Manuel utilisateur

Siemens

Siemens MICROMASTER 420 Manuel utilisateur

Siemens

Siemens CU240S DP-F Manuel utilisateur

Siemens

Siemens SIMATIC Manuel utilisateur

Siemens

Siemens SINUMERIK 840D sl Manuel de la liste des pièces

Siemens

Siemens PSO+ Manuel utilisateur

Siemens

Siemens Simatic TI405 Manuel utilisateur

Siemens

Siemens SIRIUS 3RA2712-.A Series Manuel utilisateur

Siemens

Siemens SINAMICS S120 Document technique

Siemens

Siemens SITOP UPS1600 Manuel utilisateur

Siemens

Siemens RM-30U Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur