Shuttle HOT-603 Manuel utilisateur

FCC Notice:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy. If not installed and used properly, in strict accor-

dance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures :

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help and for additional suggestions.

The user may find the following booklet prepared by the Federal Communications Commission helpful “How to Identify

and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office.

Washington, DC 20402, Stock 004-000-00345-4

FCCWarning

The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s

authority to operate this equipment.

Note : In order for an installation of this product to maintain compliance with the limits for a Class B device, shielded

cablesandpowercordmustbeused.

CE Notice:

Following standards were applied to this product, in order to achieve compliance with the electromagnetic

compatibility :

- Immunity in accordance with EN 50082-1: 1992

- Emissions in accordance with EN 55022: 1987 Class B.

NOTICE

Manual Ver 1.1

All information, documentation, and specifications contained in this manual are subject to change without prior

notification by the manufacturer.

The author assumes no responsibility for any errors or omissions which may appear in this document nor does

it make a commitment to update the information contained herein.

TRADEMARKS

All the brands and product names referred to in this manual are trademarks or registered trademarks of their

respective holders.

M87

TABLE OF CONTENTS

PREFACE ...................................................................................................................3

CHAPTER 1 FEATURES.................................................................................................4

Accessories of HOT-603.................................................................................................................. 6

CHAPTER 2HARDWARE CONFIGURATION........................................................................7

Jumper Setting.................................................................................................................................. 7

CPUClockConfigurations - JC1,JP3,JP2 and JP1 ...................................................................... 8

SystemClockand CPUMultiplier onHOT-603............................................................................ 9

CPUVoltageConfiguration -JPW!, JV2,JV3 andJV4 .............................................................. 10

Flash EEPROM Vpp - JVROM1.................................................................................................. 11

ClearCMOS- JVBAT1................................................................................................................. 11

PowerSupplyType Select ............................................................................................................. 12

Connectors & Sockets.................................................................................................................... 13

CHAPTER 3MEMORY CONFIGURATION .........................................................................15

CHAPTER 4 FLASH UTILITY ........................................................................................17

CHAPTER 5 BIOS SETUP ..........................................................................................19

Main Menu ..................................................................................................................................... 20

StandardCMOSSetup ................................................................................................................... 22

BIOS Features Setup ...................................................................................................................... 24

ChipsetFeaturesSetup................................................................................................................... 26

PowerManagementSetup ............................................................................................................. 28

PCIConfigurationSetup................................................................................................................ 30

IntegratedPeripherals .................................................................................................................... 32

PasswordSetting ............................................................................................................................ 35

PREFACE

HOT-603mainboard isahighlyintegratedIBM PC/ATcompatible systemboard. The

designwillaccept AMD K5,K6,Intel Pentium P54C,PentiumMMX and Cyrix/IBM

6x86,6x86L, 6x86MXprocessorsandalsofeatureshigh-performancepipelinedburst

secondary cache memory support with size of 1024KB or 512KB. The memory sub-

systemisdesigned tosupportup to512MB ofEDORAM, StandardFastPage DRAM

andSDRAMin standard72-pin SIMMsocketand 168-pin3.3 VDIMMsocket.

HOT-603providesa new levelof I/O integration. AMD-640chipsetprovides increased

integrationand improvedperformanceoverotherchipset designs. TheAMD-640 chipset

providesanintegrated BusMastering IDEcontrollerwith twohigh performanceUltra33

DMAIDE interfacesforuptofour IDEdevices.

Theonboard I/Ocontroller providesthe standardPC I/Ofunctions: floppyinterface,two

FIFOserialports, an IrDAdevice port andaSPP/EPP/ECP capableparallelport.

Uptofour PCI localbus slots providea high bandwidthdatapath fordata-movement

intensivefunctionssuch as graphics,and up tothree ISA slotscompletethe I/Ofunction.

TheHOT-603 providesthe foundationfor costeffective, highperformance, highly

expandableplatforms, whichdeliverthelatestin Pentiumprocessor andI/O standard.

FEATURES

TheHOT-603Mainboardiscarefully designedfor thedemandingPCuserwho wantshigh perfor-

manceandmany intelligentfeaturesin a compactpackage:

AMDChipset:

FeaturesAMD-640Chipset withI/Osubsystems.

CPUSupport:

AMD K6 166~266 MHz, K5 PR75~PR166,

IntelPentium75~200 MHz, PentiumMMX166~233 MHz,

Cyrix/IBM6x86 P120+~P166+,6x86LP166+and6x86MX PR166~PR266

SecondaryCache:

Onboard1024KBor 512KB PipelinedBurst Cache.

VersatileMemorySupports:

Equippedwithfour SIMM socketsto support (4,8,16, 32,64and 128MB) 72-pinEDO

orFPmemory modules andthree DIMM socketsto(8, 16,32,64, or 128MB)168-pin

SDRAMmemorymodules up to512 MB.

PCIandISAExpansionSlots:

Providesfour32-bit PCI slotsand three 16-bitISAslots.

OnboardI/OChip:

ProvidesoneFloppy port; oneoptional PS/2 mouseconnector; twohigh-speed UART

compatible serial ports and one parallel port with ECP and EPP capabilities. Serial Port

2canalso bedirectedfrom COM2tothe InfraredModulefor wireless connections.

OnboardPCIBusMasterIDEController:

TwoUltraDMA/33 BusMasterIDE Portssupports four IDEdevices up to33 MB/sec

IDEtransfersand supports EnhancedPIOModes 3 and4 and BusMasterIDE DMA

Mode 2 devices.

Onboard12-pinATand20-pinATXPowerSupply:

ProvidesATand ATXpower connectoronboard.

ATXpowersupports soft-on/off function.

SystemBIOS:

Provideslicensed AwardV4.51PG BIOSon FlashEEPROM.

SupportsGreen PC,DMIandBundledwith SymbiosLogin(NCR) SDCMV4.0 SCSI

BIOS.

ACPI:

SupportACPI (AdvancedConfiguration andPowerInterface)function. ACPIprovide

moreEnergySaving Featuresforthe future operatingsystem supporting OSDirect

PowerManagement(OSPM)functionality.

BoardSize:

3/4babyAT compact size220mmx 280mm.

ACCESSORIESOFHOT-603

HardwareConfiguration

Jumper Setting

Jumperpinheaders showon rightside

areusedto configuresystemclock,

CPUmultiplierand CPU voltages.

SystemClock -JC1

JC1isa 6-pins headerjumper which

is used to adjust System Clock from

50MHz to 83 MHz.

CPUMultiplier- JP1,JP2andJP3

JP1,JP2 andJP3are3-pinsheader

jumperwhichis usedtoadjust CPUcoremultiplier from1.5Xto 5.5X.

CPUVoltages

JPW1,JV2,JV3 and JV4areused toadjustonboard voltages outputfromSwitching

typeregulatorsto CPU byinsertingor removing minijumperfrom pin headers.

Thosehardwaresettings aremadethrough theuseof jumpercapsto connect jumper

pins on the main board. The jumpers will be show graphically such as to connect

pins 3&4 and 5&6, and to connect pins 1&2 and 3&4 for six pin jumpers.

Jumpers will be show graphically such as to connect pins 2&4 and to

connectpins3&4 for fourpin jumpers.

Jumpers with two pins will be shown as for Short (On) and for Open (Off).

Toconnectthe pins, simplyplacea plastic jumpercapover the twopinsas dia-

gramed.

CPU Clock Configuration - JC1, JP3, JP2 and JP1

ProcessorsJC1System

Clock

/Multiplier

Multiplier

JP3/JP2/JP1

AMD-K6266 MHz66 MHz

AMDK6233 MHz,

PentiumMMX233 MHz.

Cyrix/IBM6x86MXPR266

66 MHz

x3.5

AMD-K6200 MHz,

AMD-K5PR200,

PentiumMMX200 MHz,

Pentium200 MHz,

Cyrix/IBM6x86MXPR233

66 MHz

Cyrix/IBM6x86LP200+,

Cyrix/IBM6x86 P200+75 MHz

AMD-K6166 MHz,

AMD-K5PR166,

PentiumMMX166 MHz,

Pentium166 MHz,

Cyrix/IBM6x86MXPR200

66 MHz

x2.5

PentiumMMX150 MHz,

Pentium150 MHz,

Cyrix/IBM6x86MXPR166

60 MHz

x2.5

Pentium133 MHz,

Cyrix/IBM6x86LP166+,

Cyrix/IBM6x86 P166+

66 MHz

Pentium120 MHz,

Cyrix/IBM6x86LP150+,

Cyrix/IBM6x86 P150+

60 MHz

Cyrix/IBM6x86 PR133+55 MHz

Cyrix/IBM6x86 P120+50 MHz

AMDK5PR100/PR133,

Pentium100 MHz66 MHz

x1.5

AMD-K5PR90/PR120,

Pentium90 MHz60 MHz

x1.5

AMD-K5PR75,

Pentium75 MHz50 MHz

x1.5

Table 2-1

SystemClockandCPUMultiplieronHOT-603

MultiplierJP3/JP2/JP1

1.5X

2.5X

3.5X

4.5X

5.5X

SystemClock JC1

50 MHz

55 MHz

60 MHz

66 MHz

75 MHz

83 MHz

For whom like to set up system manually, listed tables show all the System Clock and CPU

MultiplierthatHOT-603 can offer.

Table2-2shows theSystemClock from 50MHz to 83MHz.

Table2-3shows CPUMultiplierfrom 1.5X to5.5X.

Note: SincePCIclock ishalfof systemclock,75MHz and83MHzsystemclocks may

causePCIclockbeyondPCIspecification.

Table 2-2

Table 2-3

Voltage CPU Type Jumper-Setting

Type Vcore Vio JPW1 JV3 JV4 JV2

Single

3.52V 3.52V 3.52V AMD K5 ABx,

Pentium P54C VRE,

Cyrix/IBM 6x86

3.3V 3.3V Pentium P54C STD,

Cyrix/IBM 6x86

Dual

3.2V 3.3V AMD-K6

233 / 266 MHz

2.9V 3.3V AMD-K6

166 / 200 MHz,

Cyrix 6x86MX

2.8V 3.3V Pentium P55C

MMX,

Cyrix 6x86L

2.1V 3.3V AMD-K6

266 / 300 MHz

CPU Voltage Configuration - JPW1, JV2, JV3 and JV4

Table 2-4

3.45V

3.3V

Table des matières

Autres manuels Shuttle Carte mère

Shuttle

Shuttle HOT-661/P Manuel utilisateur

Shuttle

Shuttle AN50R Manuel utilisateur

Shuttle

Shuttle Spacewalker HOT-687 Manuel utilisateur

Shuttle

Shuttle FB95 Manuel utilisateur

Shuttle

Shuttle AV49V Manuel utilisateur

Shuttle

Shuttle MZ11 Manuel utilisateur

Shuttle

Shuttle HOT-591 Manuel utilisateur

Shuttle

Shuttle HOT-675Z Manuel utilisateur

Shuttle

Shuttle AK35GT Manuel utilisateur

Shuttle

Shuttle FB86 Manuel utilisateur

Shuttle

Shuttle HOT-555 Manuel utilisateur

Shuttle

Shuttle Spacewalker AV32 Manuel utilisateur

Shuttle

Shuttle MV43V Manuel utilisateur

Shuttle

Shuttle AB60P Manuel utilisateur

Shuttle

Shuttle AT30 Manuel utilisateur

Shuttle

Shuttle FS56 Manuel utilisateur

Shuttle

Shuttle FN85 Manuel utilisateur

Shuttle

Shuttle FV24 Manuel utilisateur

Shuttle

Shuttle SH610R4 Series Manuel utilisateur

Shuttle

Shuttle MS11 Manuel utilisateur

Shuttle

Shuttle Spacewalker AK31 Manuel utilisateur

Shuttle

Shuttle FN45 Manuel utilisateur

Shuttle

Shuttle Spacewalker HOT-685V Manuel utilisateur

Shuttle

Shuttle MB11 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur