Shure SE315 Manuel utilisateur

SE315 SE425 SE535

Sound Isolating Earphones

™

The Shure high-definition sound isolating earphones, SE315, SE425, and SE535, user guide.

Version: 3 (2019-K)

Shure Incorporated

2/8

Table of Contents

SE315 SE425 SE535Sound Isolating™ Earphones 3

Sound Isolating™ Earphones 3

Detachable Cable 3

Wearing the Earphones 3

Inserting the Earphones 4

Changing Sleeves 5

Removing the Earphones 5

Choosing a Sleeve 5

Cleaning the Earphone Nozzle 6

Maintenance and Cleaning 6

Specifications 6

Accessories 7

Certifications 8

Shure Incorporated

3/8

•

SE315 SE425 SE535

Sound Isolating Earphones

Shure Sound Isolating Earphones, built with balanced armature speakers, deliver a detailed soundstage free from outside

noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and in

terchangeable Sound Isolating sleeves for a comfortable and personalized fit.

Detachable Cable

You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes

damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone

and connector.

Do not use pliers or other tools.

Grasp the connector and the earphone as close as possible to where they join.

Pull straight apart—do not twist. Cable is a snap fit, not threaded.

Note: If you pull at an angle, the connector will not detach.

Do not pull on the cable or put any pressure on the earphone nozzle.

Listen for a click when connecting.

When reattaching the cable, match the "L" and "R" markings. For clear cables and earphones, match the color dots

(Red=Right, Blue=Left).

™

Shure Incorporated

4/8

Wearing the Earphones

The following are some suggested ways of wearing the earphones.

Wear the cable over the ear and secure it behind the head to help keep the earphones in place during physical activity.

Tighten the cable and take up slack by raising the cable cinch.

Inserting the Earphones

Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.

Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the ear

phone deeper into the ear canal or try a different sleeve.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

Shure Incorporated

5/8

•

Changing Sleeves

Twist and pull to remove the sleeve from the nozzle.

Slide on a new sleeve so that it completely covers the barb and the nozzle.

Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper

fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves).

Removing the Earphones

Grasp the body of earphone and gently twist to remove.

Note: Do not pull on cable to remove earphone.

Choosing a Sleeve

Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to

remove.

Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber.

Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal.

Hold in place for about ten seconds while the foam expands.

Shure Incorporated

6/8

•

Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.

Cleaning the Earphone Nozzle

If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear

obstruction by using wire loop end of cleaning tool.

If no obstruction is found or if sound quality does not improve, replace the sleeve with a new sleeve.

Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter.

Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury.

The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them

using a dry cotton swab.

Maintenance and Cleaning

Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.

Keep the earphones and sleeves as clean and dry as possible.

To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer

drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing.

Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants.

Do not expose earphones to extreme temperatures.

Replace sleeves if they do not fit properly.

Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product

failure.

Specifications

Transducer Type

SE535/535LTD Red Triple balanced-armature drivers

SE425 Dual balanced-armature drivers

Shure Incorporated

7/8

•

SE315 Single High-Definition MicroDriver

Sensitivity

at 1 kHz

SE535/535LTD Red 119 dB SPL/MW

SE425 109 dB SPL/MW

SE315 116 dB SPL/MW

Impedance

at 1 kHz

SE535/535LTD Red 36 Ω

SE425 22 Ω

SE315 27 Ω

Frequency Range

SE535 18 Hz –19 kHz

SE535LTD Red 18 Hz –19 .5 kHz

SE425 20 Hz –19 kHz

SE315 22 Hz –18 .5 kHz

Input Connector

Goldplated 3.5 mm (1/8”) stereo mini jack plug with 6.35 mm (1/4”) threaded adapter

Net Weight

30 g (1 oz.)

Operating Temperature

-18°C to 57°C (0°F to 135°F)

Storage Temperature

-29°C to 74°C (-20°F to 165°F)

Accessories

Earphone Sleeves

Replacement Cables

Carrying Cases

Music Phone Accessory Cables

Volume Control

Adapters

For information about earphone accessories and other Shure products visit:

http://www.shure.com/americas/products/accessories/earphones

Shure Incorporated

8/8

Certifications

This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Fax: +49-7262-92 49 11 4

Email: [email protected]

Autres manuels pour SE315

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Shure Casque audio

Shure

Shure AONIC 50 Manuel utilisateur

Shure

Shure SE215-BT1 Manuel utilisateur

Shure

Shure RMCE-BT2 Guide d'installation

Shure

Shure Legendary Performance SRH145 Manuel utilisateur

Shure

Shure Sound Isolating SE112-GR Manuel utilisateur

Shure

Shure E4c Manuel utilisateur

Shure

Shure BT1 Series Manuel utilisateur

Shure

Shure Sound Isolating SE846 Manuel utilisateur

Shure

Shure Sound Isolating SE846 Manuel utilisateur

Shure

Shure E5c Manuel utilisateur

Shure

Shure RMCE Manuel utilisateur

Shure

Shure Sound Isolating SE846 Manuel utilisateur

Shure

Shure SRH1840 Manuel utilisateur

Shure

Shure AONIC FREE Manuel utilisateur

Shure

Shure SRH144 Manuel utilisateur

Shure

Shure Sound Isolating SE846 Manuel utilisateur

Shure

Shure SRH840 Manuel utilisateur

Shure

Shure I2c-m Manuel utilisateur

Shure

Shure Sound Isolating SE215 Manuel utilisateur

Shure

Shure KSE1200SYS Manuel utilisateur

Shure

Shure SCL3 Manuel utilisateur

Shure

Shure Sound Isolating Manuel utilisateur

Shure

Shure Sound Isolating Aonic 4 Manuel utilisateur

Shure

Shure RMCE-TW1 Manuel utilisateur

Manuels Casque audio populaires d'autres marques

Sony

Sony MDR-NC8 Manuel utilisateur

AUSounds

AUSounds AU-Stream Manuel utilisateur

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuel utilisateur

Philips

Philips SHE3622 Manuel utilisateur

Insignia

Insignia NS-CAHBTSPORT Manuel utilisateur

Movie Vision

Movie Vision HP-400 Manuel utilisateur

MobiFren

MobiFren SM Pro Manuel utilisateur

Motorola solutions

Motorola solutions PMLN8120 Manuel utilisateur

Jaybird

Jaybird freedom Guide d'installation

Sony

Sony MDR-ED12LP Manuel utilisateur

HiFuture

HiFuture Tidy Buds Pro Manuel utilisateur

Creative

Creative CB2530 Manuel utilisateur

Renkforce

Renkforce RF FTVK-100 Manuel utilisateur

Philips

Philips SHQ3000 Manuel utilisateur

Sennheiser

Sennheiser 500371 Manuel utilisateur

Califone

Califone 2924AV Manuel utilisateur

Philips

Philips EARGEAR HE205 Series Manuel utilisateur

Technics

Technics EAH-AZ80 Manuel utilisateur