Sharp PN-L401C Manuel utilisateur
SHARP Pen Software
OPERATION MANUAL
Version 3.5
Applicable models (as of February 2017) Available models differ according to region.
PN-L series
(PN-L401C/PN-40TC1/PN-L602B/PN-L603A*/PN-60TA3*/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L702B/
PN-L703A*/PN-70TA3*/PN-L703B/PN-70TB3/PN-L703W/PN-70TW3/
PN-L802B/PN-L803C/PN-80TC3
)
PN-C series
(PN-C603D/PN-C703B/PN-70SC3/PN-C705B/PN-70SC5/PN-C805B/PN-80SC5)
LL-S series (LL-S201A/LL-S242A)
LL-P series (LL-P202V)
PN-K series (PN-K322B/PN-K322BH)
PN-ZL01/PN-ZL02/PN-ZL03
* Preinstalled.
2
E
Introduction......................................................................3
Required Operating Environment ..................................4
Starting and Exiting the Software ..................................5
Pen Software modes and how to start the modes .......5
Exiting the software......................................................6
Layout of Basic Screen ...................................................7
Menu ............................................................................8
Display method ..........................................................16
Saving and Sending a File by E-mail ...........................17
Saving data ................................................................17
Sending drawn content by e-mail...............................18
Opening Files .................................................................19
Opening a whiteboard le / overlay board le ............19
Edit Operations ..............................................................20
Adding a board / changing the board to be edited .....20
Changing the sheet to edit .........................................20
Drawing with a Pen ....................................................25
Erasing a drawn line...................................................27
Drawing shapes .........................................................28
Drawing straight lines or arrows.................................29
Drawing a shape with the gure pen..........................29
Inputting text...............................................................30
Searching for text and handwritten characters in the
board ..........................................................................30
Importing and pasting an image.................................31
Editing an object.........................................................33
Undo/redo operation ..................................................38
Enlarging the view of the screen ...............................38
Hiding the screen / Showing only one part
(installation version only)............................................40
Using multiple touch pens simultaneously .................42
Launching an External Application
(Full version only)..........................................................43
Searching the Internet (Full version only)...................44
Importing a Document as an Image
(Pen Software Printer Driver) (Full version only)........45
Acquiring an Image From a Multifunction Machine ...46
Using the Network Scanner Tool to acquire an image
...46
Acquiring an image from a TWAIN device
(Full version only)..........................................................47
Linking to Microsoft PowerPoint
(Full version only)..........................................................48
Printing ...........................................................................49
Using a Secondary Display (Full version only)...........50
Customizing the Settings..............................................52
Installing/Uninstalling the Software
(Full version only)..........................................................59
Installing the Pen Software ........................................59
Installing the Network Scanner Tool...........................60
Intellectual Property Rights and Other Matters
that Apply to This Software ..........................................61
License information for this software..........................61
Display of licenses of software components
used in this software ..................................................62
Contents
3
E
This software is intended to facilitate effective meetings and presentations.
• Letters can be created directly so that the computer screen can be used as a whiteboard.
• Any document can be converted into an image and imported for display.
• An image can be acquired from a multifunction machine to display.
• The contents being edited can be printed out or saved.
Important Information
• This software has been shipped after strict quality control and product inspection. If, however, you nd any failure, contact
your product dealer.
• Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a
third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is
recognized under law.
• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not
permitted.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for
product improvement without prior notice.
• The screens and procedures are examples. The contents or details may vary depending on the screen conguration and OS
version, etc. Windows 7 is used as an example in this manual.
• This manual does not contain basic operating instructions for Windows.
• The paths used in this manual assume the case where this software being installed in the default folder. The actual path may
vary depending on the folder specied during installation.
Trademarks
• Microsoft, Windows, PowerPoint, Excel and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• Intel, Celeron, and Intel Core 2 Duo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the U.S.A.
and other countries.
• AMD, AMD Sempron, AMD Athlon, and combinations thereof are trademarks of Advanced Micro Devices, Inc.
• Names of products and other proper nouns are the registered trademarks or trademarks of their respective copyright holders.
Caution
• In Windows 8.1/10, the action of starting to draw from the edge of the screen is sometimes detected as a swipe.
• The version of this software that is installed and used on your computer is referred to as the “full version”.
• The version of this software that is preinstalled on the monitor is referred to as the “lite version”.
• You can install the “full version” on your computer even if your model supports the lite version.
Touch pens
The touch pens vary by model.
The touch pens are referred to generally as “touch pens” in this manual; however, when an explanation varies by model, the
touch pens are distinguished as follows:
• Passive pen
Touch pen supplied with the PN-L401C/PN-40TC1/PN-L603B/PN-60TB3/PN-L703B/PN-70TB3/LL-S201A/LL-S242A/PN-K322B/
PN-K322BH/PN-C603D/PN-C703B/PN-70SC3/PN-C705B/PN-70SC5/PN-C805B/PN-80SC5.
• Active Pen
- 2 button pen
Touch pen supplied with the PN-L602B/PN-L702B/PN-L802B.
- 3 button pen
Touch pen supplied with the PN-L603A/PN-60TA3/PN-L603W/PN-60TW3/PN-L703A/PN-70TA3/PN-L703W/PN-70TW3/
PN-L803C/PN-80TC3 and PN-ZL01/PN-ZL02/PN-ZL03.
• Digitizer pen
Touch pen supplied with the LL-P202V/PN-L803C*/PN-80TC3*, PN-ZL03*.
* When “Input mode” is set to “Pen Digitizer” in the Touch Pen Utility.
The shapes of some models are different from the illustrations in this manual.
Touch pen are intended to be used only on their respective models. Touch pen may not function correctly if used with other models.
Introduction
4
E
Required Operating Environment
Computer PC/AT compatible computer able to output a resolution of 1920 x 1080.
(CD-ROM drive required for software installation.)
OS
Windows 7 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version),
Windows 10 (32-bit or 64-bit version)*
* Use in desktop mode.
CPU Intel Celeron or AMD Sempron 1.6 GHz or faster
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended
Memory At least 2 GB
Free space on hard drive At least 200 MB (free space separately required for data storage)
5
E
Pen Software modes and how to start the modes
nFull version
TIPS
• When changing the mode, touch the “Board list” button ( ) and add a new board. (Page 20)
• To prevent the Windows taskbar from moving, lock it.
• Set the screen resolution to 1920 x 1080 (3840 x 2160 for PN-K series) and the screen color to 32 bits.
• The work area is displayed for each “sheet”. By changing the sheet, you can edit data on another screen.
• If the software was not shut down normally the previous time, the dialog box to restore backup data appears when the
software is launched.
• If the text zoom percentage is changed to other than 100%, parts of this software may not display correctly.
Whiteboard mode
You can use the screen as a whiteboard.
Up to 4 boards can be opened.
Board list
Starting whiteboard mode
Follow the steps below to start the software.
• On the desktop, touch the “Pen Software” shortcut icon ( ) twice quickly (or double-click the icon).
• Click the “Start” button, and then select “All Programs” - “SHARP Pen Software” - “Pen Software”.
• Touch a whiteboard le (a le saved in the SWSX format) twice quickly (or double-click the le).
• In Windows 8.1/10, launching is also possible from the Start screen and the Apps screen.
Starting and Exiting the Software
6
E
Overlay mode
The board is shown as transparent.
Your drawing will appear on the transparent board placed over the screen, so that you can write comments directly on the items
displayed on the screen. Note, however, that you cannot operate the screen shown behind the transparent board.
Only 1 board can be opened.
Board list
Starting overlay mode
Follow the steps below to start the software.
• On the desktop, touch the “Overlay mode Pen Software” shortcut icon ( ) twice quickly (or double-click the icon).
• Click the “Start” button, and then select “All Programs” - “SHARP Pen Software” - “Overlay mode Pen Software”.
• Touch an overlay board le (a le saved in SWSO format) twice quickly (or double-click the le).
• In Windows 8.1/10, launching is also possible from the Start screen and the Apps screen.
nLite version
To launch whiteboard mode of this software, touch “Whiteboard” in the launcher screen.
TIPS
• The overlay board cannot be used with the lite version.
• Only 1 whiteboard can be used with the lite version.
Exiting the software
Touch the “Quit” button ( ) on the toolbar.
When there is no data which is being edited and is not saved
The software is exited.
When there is data which is being edited and is not saved
A conrmation dialog box appears.
When you touch “Save and exit”, a dialog box appears to allow you to specify the destination to save the data. Conrm the
saving format, specify the destination, and save the data. (Page 17)
When you touch “Exit without saving”, the software is terminated without saving the data.
7
E
Screen example: Whiteboard mode
(2)
(1)
(3) (4) (6) (7) (8) (9)(10)(11)
(12)
(13)
(5)
(1) Indicator
Touch the icon to launch the square menu. (Page 11)
To use multiple 3 button pens, set as indicated below.
•Set “Input Mode” in the Touch Pen Utility to “Standard”
•Set “Touch Pen” to “Draw with Active Pen Only” in the pen software
When these settings are congured, a number of indicators equal to the number of 3 button pens appears (maximum of 4).
The Touch Pen Utility registration number appears in the indicator of each touch pen. (Page 52)
Example: Pen Number 1
(2) “Pin” button
Touch to switch between the pin / unpin settings.
If you want to always display the toolbar on the screen, pin button should be selected.
When set to the pin setting, the button is blue.
If you only want to display the toolbar when the menu is displayed, select the unpin setting.
(3) Sheet list
Touch this tab to display the list of sheets shown as thumbnail images. (Page 22)
(4) Settings
Displays the Pen Software settings screen. (Page 52)
(5) Navigation window
Touch to show/hide the navigation window. (Page 39)
(6) Search box
You can search for text and handwritten characters in the box. (Page 30)
(7) Sheet navigation buttons/Page No.
Touch the sheet navigation button ( ) to change the displayed sheet. (Page 20)
The number shown at the center is the page No. of the current sheet.
When the last sheet is displayed, press to add a sheet at the end.
(8) Board list (full version only)
Touch to display the list of boards as thumbnail images. (Page 20)
(9) Minimize (full version only)
The software will be minimized in the task tray.
(10) Window / Maximize (full version only)
Displays the software in a window. (Page 16)
* Whiteboard mode only.
Layout of Basic Screen
8
E
(11) Quit
The software is exited.
(12) Board
Work area. You can write letters, draw lines, and paste images etc.
The board can be displayed in 2 modes: whiteboard mode and overlay mode. The latter is transparent, showing the
background.
(13) Toolbar
TIPS
• The background color and image can be changed for whiteboard mode. (Page 23)
Menu
There are 3 menu types that can be used to select functions.
• Square menu (below), classic menu (page 9) or oating menu (page 10)
• Function list of “All Functions” (page 13)
To use a function, touch the icon of the function in the menu to select it.
nSquare menu
Touch the indicator ( ) to display the square menu.
TIPS
• The illustration displayed in the indicator varies depending on the function used.
The square menu has 2 sides. To change the menu, touch the button ( ) under the icon or touch the blank
center of the square menu.
When a place other than the menu is touched, the menu disappears and the indicator is displayed.
TIPS
• The square menu and indicator can be moved by dragging.
To move the square menu, drag the blank center of the square menu.
• To move the indicator close to the pen tip of the touch pen, hold the pen down on the screen.
• The icon size can be changed to large or small.
Changing the icon size
1. Touch the “Settings” button ( ) on the toolbar.
2. Select “Square Menu” in “Menu”.
3. Select “Large” or “Small” in “Icon Size”.
9
E
nClassic menu
The menu can be displayed in classic mode (large or small icon size).
Pan window (Only appears in whiteboard mode.) (Page 39)
Shows the current screen magnication.
Enlarges or reduces the view between 50% and 400% in increments of 25%.
The toolbar is displayed on the left side or the right side of the screen.
The menu can be moved to left/right by touching the icon ( or ).
When set to the unpin setting, the menu automatically disappears when a xed time elapses after the touch pen is moved away
from the menu. (Page 7)
When the toolbar is hidden, the show toolbar icon ( or ) appears. Touch the show toolbar icon to show the toolbar.
TIPS
• The menu icon types that appear by default are the same as in the square menu and oating menu.
• In classic menu, 1 menu is used for the settings, even when using multiple pens. When using multiple pens, the line color and
thickness are the same for all pens.
Setting to classic menu
1. Touch the “Settings” button ( ) on the toolbar.
2. Select “Classic Menu” in “Menu”.
3. Select “Large” or “Small” in “Icon Size”.
To return to the normal menu, select “Square Menu”.
10
E
nFloating menu
The menu can be moved to any position.
To move the menu, drag the background.
Title bar
is linked to pin / unpin.
Touch to minimize the menu and show only the title bar. (Not pinned)
When the menu is minimized, touch to return the menu to its original state. (Pinned)
When set to unpin on the tool bar, the menu is minimized.
Touch to return the menu to its original state pinned.
Touch to change the tool bar to horizontal display. The tool bar changes between vertical
and horizontal display each time this is touched.
TIPS
• The menu icon types that appear by default are the same as in the square menu and classic menu.
• In oating menu, 1 menu is used for the settings, even when using multiple pens. When using multiple pens, the line color
and thickness are the same for all pens.
• To move the oating menu to the pen tip of the touch pen, hold the pen down on the screen.
Setting to oating menu
1. Touch the “Settings” button ( ) on the toolbar.
2. Select “Floating Menu” in “Menu”.
To return to the normal menu, select “Square Menu”.
Autres manuels pour PN-L401C
3
Ce manuel convient aux modèles suivants
33
Table des matières
Manuels écran tactile populaires d'autres marques
Elecro Engineering
Elecro Engineering Poolsmart Plus Instructions d'installation
Johnson Controls
Johnson Controls IQ4 HUB Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET2270L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET1002L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems 3201L Manuel utilisateur
Duratec
Duratec S15 Manuel utilisateur
