Seiko 4F32 Manuel utilisateur
You are now the proud owner of a SEIKO Analogue Quartz Watch
Cal. 4F32/8F32/8F33. For best results, please read the instructions
in this booklet carefully before using your SEIKO Analogue Quartz
Watch. Please keep this manual handy for ready reference.
Usted es ahora un honrado poseedor del reloj SEIKO analógico de cuarzo
Cal. 4F32/8F32/8F33. Para obtener de él los mejores resultados, lea las
instrucciones del presente folleto con cuidado antes del uso de su reloj
SEIKO analógico de cuarzo. Guarde este manual para fácil referencia.
2
English
CONTENTS
Page
TIME/DATE SETTING ............................................................................................... 5
DAY SETTING .......................................................................................................... 5
HOW TO CHECK THE CALENDAR .......................................................................... 6
NOTES ON USING THE WATCH ............................................................................. 9
BATTERY CHANGE .................................................................................................. 11
SPECIFICATIONS ..................................................................................................... 13
✩
For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH”in the attached Limited Warranty and Instruction Booklet.
ENGLISH
3
English
CAL. 4F32, 8F32, 8F33
PERPETUAL CALENDAR
●Once set, the calendar automatically adjusts for odd and even months including
February of leap years up to February 28, 2100.
●It indicates the month, date, day of the week (Cal. 8F33) and the number of years since
the last leap year.
HIGH ACCURACY
●Loss/gain : Annual rate of less than 20 seconds
Before using the watch:
●Because the calendar is preadjusted at the factory, you only need to set the time,
date and day (Cal. 8F33), and the calendar will automatically update itself.
●Before using the watch, be sure to read “HOW TO CHECK THE CALENDAR”,
and then, set the time, date and day (Cal. 8F33) correctly following the
procedures in “TIME/DATE SETTING” and “DAY SETTING”.
* In case the calendar indication is not correct after the time/date setting is made, consult the
retailer from whom the watch was purchased or an AUTHORIZED SEIKO DEALER.
4
English
8
Cal. 4F32, 8F32 Cal. 8F33
8
MON
a b c
CROWN
a b c
CROWN
Date
Hour hand Minute hand
a: Normal position b: First click c: Second click
Second hand
Date
Hour hand Minute hand
Second hand Day of the week
5
English
TIME/DATE SETTING
8
CROWN
➠
➠
Pull out to second click when Second hand
is at the 12 o’clock position.
▼
Turn in either direction to set the time and
date.
▼
Push back completely in accordance with
a time signal.
DAY SETTING
(For Cal. 8F33)
●Set the time and date first, and then, set the day of the week.
CROWN
Pull out to first click.
▼
Turn counterclockwise to set the day.
▼
Push back in to normal position.
8
MON
➠
➠
6
English
HOW TO CHECK THE CALENDAR
Pull out to first click, and push back in to
normal position within a second.
CROWN
1. Leap year indication
The second hand moves quickly at five-second intervals and stops to indicate the
number of years that have passed since the last leap year. Before pulling out the
crown to the first click, check and remember where the second hand is so that you can
read how many seconds it has advanced.
●The watch shows the calendar in the following
order:
1. Leap year
(Second hand)
2. Month
(Calendar frame)
▲
3. Date
(Calendar frame)
▲
➠
➠
8
7
English
5 seconds 10 seconds 15 seconds 20 seconds
1 year 2 years 3 years 4 years
(leap year)
1997
2001
2005
·
·
·
2093
2097
Number of years
since
the last leap year
1998
2002
2006
·
·
·
2094
2098
1999
2003
2007
·
·
·
2095
2099
2000
2004
2008
·
·
·
2096
–
Quick
movement
of
second hand
Year
8
English
2. Current month
The current month is shown in the calendar frame for
5 seconds.
* January is represented by “1”, February “2”, and so on.
85
➡
8
➡
Ex.: May 8th
34
➡
3
➡
Ex.: March 3rd
* When the month and date are represented by the same numeral
as in the case of “January 1st”, “February 2nd”and so on, the
numeral in the calendar frame quickly advances and moves back
by one to indicate that the month and date numerals are identical.
★After the calendar has been displayed, the second hand starts moving quickly and
then resumes normal movement.
3. Current date
The numeral in the calendar frame returns to the
current date.
9
English
NOTES ON USING THE WATCH
HOW TO OPERATE THE SCREW LOCK TYPE CROWN
(for models with screw lock type crown)
●To unscrew the crown:
Turn the crown counterclockwise. (Then, pull it out for setting the time or checking the calendar)
●To screw in the crown:
With the crown at the normal position, turn it clockwise while pressing it.
TIME, DATE AND DAY SETTING
●When setting the date and day, turn the crown counterclockwise to advance the date and day and
clockwise to move them back. The date and day change one day by turning the hour hand two full
circles.
TIME/DATE SETTING
●The date changes between 11:45 p.m. and 0:30 a.m. while the watch is in operation and between 9:00
p.m. and 3:00 a.m. when it is changed manually by turning the hands. Therefore, note the following.
[AM/PM checking]
When setting the hour hand, check that AM/PM is correctly set.
* When setting the time by advancing the hands, turn the hour hand past the 3 o’clock marker. If the
date advances, the time is set for the AM period. If it does not change, the time is set for the PM
period.
* When setting the time by turning back the hands, turn the hour hand past the 9 o’clock marker. If
the date moves back, the time is set for the PM period. If it does not change, the time is set for
the AM period.
10
English
[Setting the time between 9:00 p.m. and 3:00 a.m.]
* If the time is adjusted to the time period between 9:00 p.m. and 3:00 a.m., the date may not change
properly. The watch, however, will indicate the date properly after 3:00 a.m.
* To prevent this from occurring, first turn back the hour hand past 9:00 p.m., checking that the date
moves back to the previous day, and then, advance the hands to the desired time.
●When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it
back to the exact time.
●Note on the leap second
One day normally is said to consist of 86,400 seconds. In fact, it can be longer or shorter
than this because of irregular changes in the rotation cycle of the earth. When the
accumulated fluctuations in the length of a day total plus or minus one second, one
DAY SETTING
●The day changes between 11:00 p.m. and 4:00 a.m. while the watch is in operation and also when it
is changed manually by turning the hands.
●Do not change the day between 10:00 p.m. and 5:00 a.m. Otherwise, it may not change properly. If
it is necessary to set the day during that time period, first change the time to any time outside it, set
the day and then reset the correct time.
HOW TO CHECK THE CALENDAR
●If the crown is pulled out to the second click instead of the first click and pushed back in to the normal
position, the watch will not show the calendar.
●Do not leave the crown at the first or second click when you use the watch, as this will shorten the
battery life.
Autres manuels pour 4F32
1
Table des matières
Autres manuels Seiko Montre
Seiko
Seiko 6R20 Manuel utilisateur
Seiko
Seiko Cal. 4T57 Manuel utilisateur
Seiko
Seiko Astron 7X52 Manuel d'instructions
Seiko
Seiko V137A Manuel utilisateur
Seiko
Seiko ASTRON 8X22 GPS SOLAR Manuel utilisateur
Seiko
Seiko 5Y85A Guide de démarrage rapide
Seiko
Seiko ASTRON Manuel utilisateur
Seiko
Seiko 6M15 Manuel utilisateur
Seiko
Seiko 7T85 Guide de démarrage rapide
Seiko
Seiko 7T82 Manuel utilisateur
Seiko
Seiko Astron SSH109J Manuel utilisateur
Seiko
Seiko 7N32C Guide de démarrage rapide
Seiko
Seiko WIRED W543 Manuel utilisateur
Seiko
Seiko V111 Manuel utilisateur
Seiko
Seiko Cal. V172 Manuel utilisateur
Seiko
Seiko 7D Series Manuel du propriétaire
Seiko
Seiko Pulsar 7T32 Manuel utilisateur
Seiko
Seiko V115A Guide de démarrage rapide
Seiko
Seiko W861 Manuel utilisateur
Seiko
Seiko S034 Manuel utilisateur
