Seal One 7300pro Manuel utilisateur

Seal One®7300pro

User manual

1 General

1.1 Seal One®– Security for Business Transactions

Congratulations for choosing a Seal One®GeYice7o Pa[iPi]e its EeneÛtsSlease reaGthe user Panual

carefully before using.

1.2 Secure Authorization of Online Transactions with Seal One®

The Seal One®technology coPbines Pa[iPuPsecurity Zith effortless ease of use for the Yery Ûrst tiPe.

$ll Seal One GeYices are GeYeloSeGto authori]e transactions through the use of Gigital signatures e.g.

as Sart of online Pobile banNing or SayPents. Through a secure connection Yia 8S%or %luetooth to a

coPSatible GeYice Zith an internet connectionthe Seal One Sro Sresents transactions on its oZn

GisSlay anGlets you authori]e thePby the Sush of a button.

Please pay special attention to the following security advisory:

Always carefully review the transaction data on the device’s display before you authorize them by

pressing the button.

:hen connecteGYia 8S% the Seal One Sro is reaGy for iPPeGiate use Zithout aGGitional softZare

installationanGoffers coPSrehensiYe Srotection against YirusestroMansShishing attacNsanGother

tySes of PalZare Guring transaction authori]ation.

To use Zith %luetooth on 3C or Zith Pobile GeYicesyou Zill neeGthe Seal One coPSanion aSS. )or

Pore inforPationsee the instructions GetaileGin section .

The Seal One GeYices are coPSatible Zith all PaMor oSerating systePsincluGing Pany Yersions of

Microsoft®:inGoZsMac OS®/inu[ $nGroiG anGiOS. )or a coPSleteuStoGate listing of suSSorteG

oSerating systePssee httSsZZZ.sealone.coPos.

1.3 Operation of the Seal One devices

The oSeration of Seal One Sro is siPSleconYenient anGsecure. $fter enrolling Zith an acceStance

Sartneryou can authori]e a transaction folloZing these steSs

1. Connect: Turn on the GeYice anGconnect to your Pobile GeYice or 3C Yia 8S%or %luetooth

after initiating a transaction froPZithin an acceStance Sartnerps aSSlication.

2. Review: 9erify the transaction Gata on the GisSlay of the GeYice.

. ConÚrm: $uthori]e the transaction by Sressing the button.

2 Enrollment with an acceptance partner

2.1 Seal One acceptance partner

Where can I use my Seal One device?

Seal One devices can be used in conMunction Zith any acceStance Sartner

of Seal One $*. $n acceStance Sartner Zill indicate its SartnershiSZith

Seal One $* using the Seal One $cceStance /ogo

<ou can Ûnd a list of acceStance Sartners athttSsZZZ.sealone.comSartner

2.2 Enrolling the Seal One device with an acceptance partner

The Seal One Sro must be enrolled Zith an acceStance Sartner Srior to use. Since this Srocess may

differ from one acceStance Sartner to anotherZe Nindly asNyou to folloZthe instructions outlined by the

resSective Sartner.

3lease contact the Customer Service of the acceStance Sartner should any Tuestions or concerns arise

Zith regards to the enrollment of the Seal One device Zithin their aSSlication.

2.3 Display of the Seal One ID

The Seal One I'is needed in order to enroll the Seal One device Zith an acceStance Sartner. To see it on

the disSlaycomSlete the folloZing steSs

. MaNe sure that there is no transaction disSlaying on the device

and that you see the folloZing

. 3ress and hold the authori]e button on your Seal One device for at least

seconds until you see the Seal One I'aSSear on the disSlay.

The Seal One I'is shoZn in blocNs of characters as e[hibited here

1.% The folloZing letters are NOT usedI India M MiNe O Oscar W WhisNey.

Display Description

The Seal One logo is shoZn on startuSof the Seal One device. If the logo remains

Sermanently on the disSlay during startuS the 8S%Sort on your 3C is most liNely

blocNed or malfunctioning. In this caseSlease use the suSSlied Micro8S%cable

and or another 8S%Sort on your 3C. If the Sroblem Sersists and you are using

a comSany 3CSlease contact your System $dministrator the Seal One device

might have to be sSeciÛcally unlocNed based on 8S%9endor 3roduct I'.

The Seal One Sro has established a 8S%connection to the 3Cbut the

Seal One comSanion aSSlication has not yet been started. 1ote1o C'is

reTuired to start the aSSlication. )or more informationSlease see Section ..

$fter the device is turned onthe Seal One Sro Zill attemSt to connect via

%luetooth to your mobile device. 1oteThe arroZs are Üashing. MaNe sure you

have installed the comSanion aSS on your mobile device and %luetooth is ena

bled. $lternativelyconnect the device to your 3C via 8S%using the suSSlied

Micro8S%cable.

If a connection via %luetooth is establishedthe %luetooth icon Zill be shoZn in

the uSSer right corner.

$n active bluetooth connection has been establishedand the Seal One Sro

is connecting to the Internet. 1otethe arroZs are Üashing.

The Seal One Sro is connected via %luetooth to a device Zith an active inter

net connection and is ready for use.

1oteThe dots on the arroZs are running in oSSosite directions.

There is no connection betZeen the Seal One Sro and the internet.

3lease checNif you have an active connection to the internet.

1oteThe Zarning sign is Üashing.

The battery icon shoZs the charge level of the battery. 8se the suSSlied

Micro8S%cable to charge the device.

The device is connected Zith a SoZer suSSly and is charging.

The Seal One I'is needed to enroll Zith an acceStance Sartner. It Zill shoZZhen

you Sress and hold the authori]e button for at least seconds. $s soon as your

Seal One device is successfully registeredit changes to the mode eready to useq

1oteIn case you Zant to discontinue disSlaying the Seal One I'Zithout enrolling

Zith a SartnerSush the button for at least seconds once more.

This text indicates an internal device failure. Switch off the device and turn it on

again. 1oteIf this message icon continues being disSlayed regardless of any

actions taNenSlease write to the following contact address

Nundenservice#sealone.com

The Seal One Sro device turns off after a few minutes of continued inactivity.

8sing %luetoothTurn on the device. If this is not Sossiblecharge it with the

suSSlied Micro8S%cable.

8sing 8S% If a transaction arrives while the device is in this statethe Sower

saving mode is automatically terminated and the transaction data is shown.

)or more information visithttSswww.sealone.comservice

3 Symbols and their meaning

4 Seal One Usage

4.1 Seal One 7300 pro with Windows

Step 1: MaNe sure that your 3C is connected to the internet.

Step 2: 'ownload and start the Seal One aSSlication

https://www.seal-one.com/7300pro

$setuSwi]ard will aSSear on aSSlication startuSwhen no Nnown devices are detected.

$lternative

Connect the Seal One Sro to an available 8S%Sort on your 3C and start the aSSlication on the

virtual C'drive no actual C'is needed.

The device will disSlay the following symbols one after another as shown below

If the C'icon continues to show e.g.because auto start is

disabled you need to start the Seal One aSSlication manually.

5efer to section ..for more information.

Step 3: )ollow the instructions on the setuSwi]ard to connect your Seal One Sro via 8S%or

%luetooth.

1.%. If you do not see the oStion to connect via %luetooth at this Sointyour comSuter or oSerating

system does not suSSort %luetooth /( /ow (nergy. In this caseyou must connect the Seal One device

to your 3C via 8S%.

Once you have successfully established a connection to your 3C via %luetooth or 8S% you will be

directed to a screen informing you that your Seal One is ready for use.

The following message will aSSear on the disSlay of your Seal One device.

1oteThe dots on the arrows are moving.

4.1.1 The CD symbol remains permanently on the display of the Seal One:

%y defaultthe aSSlication launches directly from the Seal One device when you connect it to your 3C via

8S%. When the aSSlication does not start automatically after connecting via

8S%e.g.auto start is disabled you must start the aSSlication manually.

OSen qThis ComSuterron your desNtoSor in the start menuoStion q(xSlorerr

The Seal One Sro is mounted as a virtual C'5OM. Start the Srogram by double

clicNing the aSSlication icon labeled qSealOner.

4.1.2 Settings

The settings for your Seal One device are managed under the qSettingsrmenu oStion

clicNthe tray icon to disSlay the full menu.

1.%. It is Sossible that the Seal One tray icon is hidden until you clicNthe 8S arrow to show all tray icons.

$vailable settings include changing the deviceps nameadding removing devicesand enabling

4uicNStart.

4.1.3 Zoom Display

If the default font si]e of the disSlayed data on the Seal One deviceps screen is too small for youyou

have the oStion to enlarge the font si]e. <ou can enable disable disSlay ]oom

via the q=oom 'isSlayrmenu oStion of the tray icon.

4.1.4 Proxy-Server

%y defaultthe Sroxy setting is q$utomatically detect Sroxy settings for this networNr. 1ormallyyou

should not need to change this setting. In exceStional casesyou may manual conÛgure the

3roxy settings here.

If you have any Tuestions with regards to 3roxy settings

contact your System Administrator.

When lines larger than the screen si]e are disSlayedthe font will be disSlayed as a hori]ontally

scrolling ticNer.

4.2 Seal One 7300pro with Mac OS

Step 1: MaNe sure that your Mac is connected to the internet.

Step 2: 'ownload and start the Seal One aSSlication.

https://www.seal-one.com/7300pro

A setuSwi]ard will aSSear on aSSlication startuSto helSyou set uSyour Seal One Sro.

Alternative

Connect the Seal One Sro to an available 8S%Sort on your Mac and start the aSSlication on

the virtual C'drive no actual C'is needed.

The device will disSlay the following symbols one after another as shown below

If the C'icon continues to show e.g.because auto start is

disabled you need to start the Seal One aSSlication manually.

5efer to section ..for more information

Step 3: )ollow the instructions on the setuSwi]ard to connect your Seal One Sro via 8S%or

%luetooth to your Mac.

1.%. If you do not see the oStion to connect via %luetooth at this Sointyour Mac or oSerating system

version does not suSSort %luetooth /( /ow (nergy. In this caseyou must connect the Seal One device

to your Mac via 8S%.

Once you have successfully established a connection to your Mac via %luetooth or 8S% you will be

directed to a screen informing you that your Seal One is ready for use.

The following message will aSSear on the disSlay of your Seal One device.

1oteThe dots on the arrows are moving.

4.2.1 The CD symbol remains permanently on the display of the Seal One

The C'symbol will aSSear and Sersist on the disSlay of your Seal One if the

Seal One aSSlication is not currently running. In this caseyou will need to

manually start the aSSlication.

OSen the Seal One aSSlication by doubleclicNing the Seal One C'icon on your 'esNtoS.

Alternativelyyou can use the q)inderraSSlication to

Ûnd a mounted virtual C'5OM drive and start the

aSSlication there.

Start the Seal One aSSlication with another doubleclicNon the

Seal One aSSlication icon. If you had to follow these steSs to start the

aSSlicationyou are now ready to Sroceed with Section .SteS.

4.2.2 Settings - Mac OS

The settings for your Seal One device are managed under the qSettingsrdroSdown menu oStion

clicNthe icon in the Menu %ar to disSlay the full menu.

Available settings include changing the deviceps nameadding removing devicesand enabling

4uicNstart.

4.2.3 Zoom Display

If the default font si]e of the disSlay data on the Seal One deviceps screen

is too small for youyou have the oStion to enlarge the font si]e. <ou can

enable disable disSlay ]oom via the q=oom 'isSlayrdroSdown menu oStion

of the Seal One Menu %ar icon.

4.3 Seal One 7300pro with Linux

The use of the Seal One Sro with /inux is only Sossible via 8S%. 'eSending on the /inux distribution

and conÛgurationthe Seal One C'drive will automatically mount itself. When thatps not the caseyou

must do this steSmanually. Once doneyou can Ûnd the drive from your )ile Manager and start the Seal

One aSSlication by double clicNing on it.

In order to have a full featured exSerience on /inuxyou will need a /inux 'istribution which con

tains the *T.graShics library. <ou can also use the aSSlication without a *raShical 8ser Interface

in which case you would need to manage the necessary settings for your Seal One device via the

command line. )or more detailssee the 5(A'M(.txt on the virtual C'5OM drive.

When lines larger than the screen si]e are disSlayedthe font will be disSlayed as a hori]ontally

scrolling ticNer.

Autres manuels pour 7300pro

Table des matières

Manuels Terminal de paiement populaires d'autres marques

PAX

PAX D180SRF Manuel utilisateur

LinkPoint

LinkPoint AIO Manuel utilisateur

Moneris

Moneris hispeed 6200 Manuel utilisateur

Moneris

Moneris iWL220 Manuel utilisateur

Ingenico

Ingenico iUC280 Manuel utilisateur

Ingenico

Ingenico Tetra Move/5000 Manuel utilisateur

Ingenico

Ingenico iWL250B Manuel utilisateur

Optimum

Optimum M4230 Manuel utilisateur

Triton

Triton RL5000 Manuel utilisateur

Ingenico group

Ingenico group Lane/8000 Manuel utilisateur

Gilbarco

Gilbarco FlexPay IV CRIND Manuel d'installation et d'exploitation

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Manuel utilisateur

PAX

PAX S920 Manuel utilisateur

Ingenico

Ingenico iCT220, iCT250 Manuel utilisateur

dejavoo

dejavoo Z Series Manuel utilisateur

VeriFone

VeriFone VX 520 Series Manuel utilisateur

Optomany

Optomany axept S900 Manuel utilisateur

Skyzer

Skyzer iWL252 BLUETOOTH Manuel utilisateur