Sauter CD P2 Mode d’emploi

Sauter GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Tel.: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.sauter.eu

Instruction Manual / Data sheet

CD P2

V. 1.0

12/2018

CD P2-BA-e-1810

2 CD P2-BA-e-1810

SAUTER CD P2

V. 1.0 12/2018

Instruction Manual / Data sheet

Summarize:

1Short description........................................................................................... 3

2Available models............................................................................................ 3

3Introduction.................................................................................................... 3

4Warning notes................................................................................................ 3

5Warranty......................................................................................................... 3

6Detailed specifications.................................................................................. 4

7Wiring.............................................................................................................. 4

8Dimensions in mm......................................................................................... 5

9Certificate of Compliance.............................................................................. 5

CD P2-BA-e-1810 3

1 Short description

Stainless steel IP68 (acc. to EN 60529) compression / tension load cell

Force measuring compatible

RoHS conform

Suitable for vehicle and hopper scales and vehicle testing facilities, test stands

Accuracy OIML R60 C2

2 Available models

Capacity

Model

10t((≈100kN)

CD 10-2P2

20t (≈200kN)

CD 20-2P2

30t (≈300kN)

CD 30-2P2

40t (≈400kN)

CD 40-2P2

50t (≈500kN)

CD 50-2P2

100t (≈1000kN)

CD 100-2P2

3 Introduction

Please pay attention to the notes of the operating manual: read these operating

manual carefully before commissioning, even if you already have experience with

SAUTER measuring cells.

After receiving the measuring cell, it should be checked in advance whether no

transport damage has occurred, whether the outer packaging or other parts or even

the article itself has been damaged. If any damage is evident, please inform

SAUTER GmbH immediately.

4 Warning notes

Observe the national accident prevention regulations.

Not correct executed use of the measuring cell can lead to serious injuries, death,

material damage and personal injuries. Use only by trained and experienced people.

Never load more than the max. capacity to a measuring cell. Overloaded measuring

cells no longer have the required accuracy. Overloaded or deformed measuring cells

are no longer allowed to use and must be changed quickly.

Never step under suspended loads.

Always fasten overload- or break security to your construction.

Pay attention to the allowed static and dynamic loads of the used equipment.

Let the measuring cells calibrate at regular intervals.

Only load the measuring cell in its specified load direction. Avoid lateral forces.

Control the measuring cells to deformations and cracks.

Measuring cells with 4-Conductor cable will change their characteristic value when

shortened or extended the cable length.

5 Warranty

The warranty expires at:

Disregard of the specifications of the operating manual

Modification or opening the measuring cell

Overload

4 CD P2-BA-e-1810

Mechanical damages

Damage caused by liquids or media

Natural loss

Not correct installation

6 Detailed specifications

Output sensitivity ( FS )

mV/V

1.5 ± 0.002

Maximum capacity ( Emax )

10, 20, 30, 40, 50, 100

Max.number of load cell

intervals

nLC

2000

Ratio of min. LC verification

interval

Y = Emax /

vmin

5000

Combined Error

%FS

≤± 0.03

Minimum dead load

Of Emax

Safe overload

of Emax

150 %

Ultimate overload

of Emax

300 %

Zero balance

of FS

< ± 1.0 %

Excitation, recommended

voltage

5 ~ 12

Excitation maximum

Input resistance

700 ± 7

Output resistance

703 ± 4

Insulation resistance

MΩ

≥5000 ( at 50VDC )

Compensated temperature

°C

-10 ~+40

Operating temperature

°C

-35 ~ +65

Storage temperature

°C

-40 ~ +70

7 Wiring

Shielded, 4 conductor cable. Cable diameter: Ø5mm. Standard cable length: 20m.

Shield not connected to element

4-wire diagram

Input(+)

Output(-)

Input (-)

Output(+)

red

white

black

green

CD P2-BA-e-1810 5

8 Dimensions in mm

Dimension

Capacity

ØA

SRB

10t, 20t

180

69.3

99.7

200

M36 x 3

30t

200

88.9

115.6

250

M42 x 3

40t, 50t

250

99.3

105

138.3

300

M56 x 4

100t

350

131.9

152.4

183.9

400

M76 x 4

9 Certificate of Compliance

The Certificate of Compliance can be downloaded from the website www.sauter.eu

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels sauter Instrument de mesure

sauter

sauter FC Manuel utilisateur

sauter

sauter FP Series Manuel utilisateur

sauter

sauter SX 50C Manuel utilisateur

sauter

sauter SW 1000 Manuel utilisateur

sauter

sauter FK 10 Manuel utilisateur

sauter

sauter FL series Manuel utilisateur

sauter

sauter FH-M Manuel utilisateur

sauter

sauter TD 225-0.1US. Manuel utilisateur

sauter

sauter TE 1250-0.1F Manuel utilisateur

sauter

sauter TF 1250-1.1FN Manuel utilisateur

sauter

sauter FA Manuel utilisateur

sauter

sauter TF 1250-0.1FN Manuel utilisateur

sauter

sauter FA Manuel utilisateur

sauter

sauter TU-US Manuel utilisateur

sauter

sauter CE WT1-Y1 Manuel utilisateur

sauter

sauter SAUTER TC car Manuel utilisateur

sauter

sauter FK Tensio Manuel utilisateur

sauter

sauter TVL Manuel utilisateur

sauter

sauter TN-US Manuel utilisateur

sauter

sauter TU 80-0.01US Manuel utilisateur

sauter

sauter FL Manuel utilisateur

sauter

sauter TC 1250-0.1F Manuel utilisateur

sauter

sauter TB Manuel utilisateur

sauter

sauter FH-S Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

sauter CD P2 Mode d’emploi

Manuels Instrument de mesure populaires d'autres marques