Sartorius CPA 12001S Manuel utilisateur

Operating Instructions

Sartorius CP|Gemplus Series

CPA, GCA and GPA Models

Electronic Micro-, Analytical and Precision Balances and Precious Metal Scales

98648-015-70

Contents

Safety Precautions 3

Getting Started 5

Installation 6

Operation 15

Overview of Display and

Operating Elements 15

Basic Weighing Function 16

Below-Balance Weighing 18

Calibration and Adjustment 20

Configuration 25

Printing the Parameter Settings 25

Setting the Parameters

(Menu Codes) 26

Parameter Settings (Overview) 27

Setting IDs, Time, Date and

Display Brightness 32

Application Programs 35

Net-total Formulation 36

Counting 40

Reference Balance/Scale for Counting 40

Weighing in Percent 44

Animal Weighing/Averaging 47

Toggling between Weight Units 50

Generating a Printout 51

ISO/GLP-compliant Printout/Record 53

Interface Port 55

Data Input Format 59

Pin Assignment Charts 62

Cabling Diagram 63

Troubleshooting Guide 64

Preparing CPA2P.. Models for

Transport 65

Care and Maintenance 66

Instructions for Recycling 68

Overview 69

Specifications 69

Accessories (Options) 81

Declarations of Conformity 84

EC Type-approval Certificate 87

Plates and Markings 88

Safety Precautions

Safety Instructions

§Please read these operating instructions

carefully before using your balance

to prevent damage to the equipment.

!Do not use this equipment in hazardous

areas/locations.

!The balance housing may be opened

only by Sartorius service technicians

who have been trained at the factory.

!Make sure you disconnect the balance

from power before connecting or

disconnecting peripheral devices to or

from the balance.

!If you operate the equipment under

ambient conditions that require higher

safety standards, you must comply with

the installation regulations applicable

in your country.

When cleaning your balance, make

sure that no liquid enters the balance

housing; use only a slightly moistened

cloth to clean the balance.

Installation

!Make sure the voltage rating printed

on the AC adapter is identical to your

local line voltage.

– Proceed with extreme caution when

using pre-wired RS-232 connecting

cables, as the pin assignments may

not be compatible with Sartorius

equipment. Check all pin assignments

against the cabling diagrams and dis-

connect any lines that do not match.

!If there is visible damage to the equip-

ment or power cord, disconnect the

equipment from power and lock it in

a secure place to ensure that it cannot

be used for the time being.

– Connect only Sartorius accessories

and options, as these are optimally

designed for use with your balance.

The operator shall be responsible

for any modifications to Sartorius

equipment and for any connection

of cables or equipment not supplied

by Sartorius and must check and,

if necessary, correct these modifications

and connections. On request, Sartorius

will be happy to provide information on

operating specifications (in accordance

with the Standards for defined immunity

to interference).

$Do not open the balance. If the seal

is broken, this will result in forfeiture

of all claims under the manufacturer's

warranty.

$If you have any problems with your

balance, please contact your local

Sartorius office, dealer or service center.

Equipment Supplied

The equipment supplied includes the

components listed below:

CPA2P, CPA2P-F

– Balance with display and control unit

– Kit of standard accessories

– AC adapter

– Dust cover

– Filter pan and lid (model CPA2P-F only)

– Spacer (model CPA2P-F only)

The kit of standard accessories contains

the following:

– Weighing pan

– Interior draft shield

– Hanger for below-balance weighing

– 1 brush

– 1 pair of forceps

– 1 piece of lint-free cloth

CPA Balances with a Readability of

<0.1 mg; CPA…-DS, GCA Scales

–

Balance/scale with display and

control unit

– Electronics box (model CPA225D only)

– Draft shield with base plate

(not available for the CPA64-WDS)

– AC adapter

– Weighing pan

– Shield disk

– Centering plate (only for CPA…DS)

– In-use dust cover

– Gem tray (GCA scales only)

CPA Balances with a Readability of 1 mg

(except for the CPA…-DS models)

– Balance with display and control unit

– Draft shield with cover

– AC adapter

– Weighing pan

– Pan support

– Base plate

– In-use dust cover

CPA-Balances with a Readability of

0.01 g/0.1 g, GPA Scales

–

Balance/scale with display and

control unit

– AC adapter

– Weighing pan

– Gem tray (GPA scales only)

– In-use dust cover

CPA34001S, CPA34001P, CPA16001S,

CPA12001S, CPA34000

– Balance with display and control unit

– AC adapter

– Weighing pan

– In-use dust cover

Getting Started

Storage and Shipping Conditions

– Do not expose the balance to

extreme temperatures, moisture, shocks,

blows or vibration.

Unpacking the Balance

§After unpacking the equipment,

please check it immediately for any

external damage

$If damage is evident, refer to the

instructions under “Safety Inspection"

in the chapter entitled “Care and

Maintenance."

$Save the box and all parts of the

packaging for any future transport.

Disconnect all cables before packing

the balance for shipping!

Installation

Choose a location that is not subject

to the following negative influences:

– Heat (heater or direct sunlight)

– Drafts from open windows and doors

– Extreme vibrations during weighing

– Excessive moisture

Conditioning the Balance

Moisture in the air can condense on

the surfaces of a cold balance whenever

it is brought into a substantially warmer

place. If you transfer the balance to

a warmer area, make sure to condition it

for about 2 hours at room temperature,

leaving it unplugged from AC power.

Seal on Balances Verified for Use

in Legal Metrology in the EU*:

EU legislation requires that a control

seal be affixed to verified balances of

accuracy class K. The control seal

consists of a sticker with the “Sartorius"

logo. If the seal is broken, the verifi-

cation becomes null and void and the

balance must be re-verified.

* Including the Signatories of the Agree-

ment on the European Economic Area

Installation

Model CPA2P

§Remove the adhesive tape from the chamber doors

§Place the components listed below inside the

chamber in the order given:

– Interior draft shield

– Weighing pan

Model CPA2P-F

1) Weighing filters of up to 125 mm d:

§Lift the chamber lid gently and turn it to the

left or right

§Place the components listed below inside

the chamber in the order given:

– Interior draft shield

– Filter pan

– Cover the sample (filter) with the lid

2) Weighing with the standard weighing pan

(20 mm d):

§Lift the chamber lid gently and turn it to the

left or right

§Place the components listed below inside

the chamber in the order given:

– Interior draft shield

– Spacer ring

– Weighing pan

Balances with an Analytical Draft Shield

!Check the sliding lock device on the back of the

draft shield; make sure it is in the “open" position

(to the right).

§Position the draft shield carefully on the balance

§Secure the draft shield by pressing lightly on

the draft shield base and moving the sliding lock

device to the left

§Place components inside the chamber in the

following order:

– Base plate

– Shield ring

– Pan support

– Weighing pan

– Gem tray (GCA scales only)

§Place components inside the chamber in the

following order:

– Base plate

– Centering plate

– Shield ring

– Pan support

– Weighing pan

Round weighing pan shape

Triangular weighing pan shape

Connecting Model CPA26P, CPA225D (-0CE)

to the Electronics Box

– Plug the male connector on the cable into the

female connector on the electronics box

!Do not exchange the balance or electronics box with

a component of a different balance!

Balances with a 3-Sided Draft Shield

§Place draft shield on the balance with the cover

opening in front on the right

§Turn the draft shield clockwise until it is firmly

in position

§Place components inside the chamber in the

following order:

– Base plate

– Weighing pan receptor

– Weighing pan

$To access the weighing chamber from the side,

remove side panels as desired

Balances/Scales with a Rectangular Weighing Pan

and a Weighing Capacity up to 10 kg

§Place the components listed below on the

balance/scale in the order given:

– Weighing pan

– Gem tray (GPA scales only)

Balances with a Rectangular Weighing Pan and

a Weighing Capacity over 10 kg

§Place the weighing pan on the balance

Connecting the Balance to AC Power/

Safety Precautions

$Use only original Sartorius equipment.

The AC adapter meets the requirements of IP20 in

accordance with EN 60529.

$For AC adapters with higher protection ratings

or for an external rechargeable battery pack, please

see “Accessories."

CPA26P, CPA225D:

GInsert the right-angle plug from the AC adapter into

the jack on the electronics box.

All other balances with a weighing capacity

up to 10 kg:

GInsert the right-angle plug from the AC adapter

into the jack on the balance.

GConnect the AC adapter to an electrical outlet

(mains supply)

AC Adapter with Country-specific Power Cord

Some models come with separate country-specific

power cords for the AC adapter. In Europe, use only

original Sartorius AC adapter part no. 6971983.

§Connect the angle plug to the balance/scale

§Select the power cord for your area and connect it to

the AC adapter

§Plug the power cord into the wall outlet (mains)

Connect the power cord to the AC adapter

(on balances with weighing capacities up to 10 kg)

$Use an original Sartorius AC adapter with a wide input

voltage range (100 to 240 V~), order no. 6971966,

and replaceable power cord:

6900900 (Europe)

6900901 (US/CDN)

6971945 (UK)

6900905 (AUS)

6900902 (ZA)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sartorius Échelle

Sartorius

Sartorius Signum 1 Manuel utilisateur

Sartorius

Sartorius MC 5 Manuel utilisateur

Sartorius

Sartorius Cubis MCA125P Series Manuel utilisateur

Sartorius

Sartorius Signum: Option Y2 SIWR Instructions originales

Sartorius

Sartorius PMA.Qualit Series Manuel utilisateur

Sartorius

Sartorius QC34EDE-S Manuel utilisateur

Sartorius

Sartorius PMA.Evolution Manuel utilisateur

Sartorius

Sartorius PMA.HD Manuel utilisateur

Sartorius

Sartorius EVO1Y Manuel utilisateur

Sartorius

Sartorius PMA.Quality PMA7501H Manuel utilisateur

Sartorius

Sartorius PMA.Economy Manuel utilisateur

Sartorius

Sartorius PMA35001-Y Manuel utilisateur

Sartorius

Sartorius Master Pro Series Manuel utilisateur

Sartorius

Sartorius PMA7500 Manuel utilisateur

Sartorius

Sartorius Master series Manuel utilisateur

Sartorius

Sartorius Cubis MCA Series Manuel utilisateur

Sartorius

Sartorius PMA.Power Series Manuel utilisateur

Sartorius

Sartorius EA Manuel utilisateur

Sartorius

Sartorius CH1NE Manuel utilisateur

Sartorius

Sartorius combics 1 Manuel utilisateur

Sartorius

Sartorius CAPXS Series Manuel utilisateur

Sartorius

Sartorius PMA.Vision Manuel utilisateur

Sartorius

Sartorius Economy Series Manuel utilisateur

Sartorius

Sartorius 1802 Guide de l'utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur