Sanyo VCC-5972P Manuel utilisateur

INSTRUCTION MANUAL

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

COLOUR CCD Camera

CCD-Farbkamera

Caméra CCD COULEUR

VCC-5972P

About this manual

•Before installing and using the

camera, please read this manual

carefully. Be sure to keep it handy for

later reference.

À propos de ce manuel

•Avant d’installer et d’utiliser la caméra,

veuillez lire ce manuel attentivement.

Gardez-le à portée de main pour toute

référence ultérieure.

Über diese Bedienungsanleitung

•esen Sie bitte vor der Montage und

dem Inbetriebnehmen der Kamera

zuerst diese Bedienungsanleitung

sorgfältig durch und bewahren Sie sie

zum späteren Nachschlagen auf.

L53P2/EX GB 1998, 3, 11

Depending on the conditions of use,

installation and environment, please be sure

to make the appropriate settings and

adjustments. If you need help with installation

and/or settings, please consult your dealer.

CONTENTS

PRECAUTIONS...................................................2

PARTS NAMES...................................................3

MOUNTING THE LENS......................................6

CONNECTIONS..................................................8

SETTINGS...........................................................9

USING THE ON-SCREEN MENUS....................12

ADJUSTMENTS................................................13

TROUBLESHOOTING.......................................24

MENU DISPLAY...............................................25

SPECIFICATIONS .............................................2

ACCESSORIES

1C mount adaptor (5 mm).....................1 pc.

The C mount adaptor must be used to be

able to install a C mount lens on the

camera.

2ens iris plug (4-pin).............................1 pc.

3AC adaptor ..........................................1 pc.

4AC adaptor mounting plate .................1 pc.

: With 3 fixing screws

FEAT RES

•Built-in interline transfer method 1/3" CCD,

approx. 470,000 picture elements

•ow smear, anti-blooming, low lag, no

burning and no geometric distortion using

the CCD solid state image device.

•100% solid state components giving

excellent immunity to shock and vibration

•Not subject to interference from magnetic

or electrostatic fields

•High sensitivity, minimum required

illumination is 0.9 lux (F1.2, AGC Gain:

High, incandescent lighting)

•Horizontal resolution, more than 460 TV

lines

•Power supply: 12 V DC operation (supplied

AC adaptor)

53P2/EX GB 1998, 3, 11

English 1

PRECA TIONS

In case of problem

Do not use the camera if smoke or a strange

odour comes from the unit, or if it seems not

to function correctly. Disconnect the power

cord immediately, and consult your dealer (or

a Sanyo Authorized Service Centre).

Do not open or modify

Do not open the cabinet, as it may be

dangerous and cause damage to the unit. For

internal settings and repairs, consult your

dealer (or a Sanyo Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable

substance get inside the camera. If used with

a foreign object inside, it could cause a fire,

short-circuits or damages.

If water or a liquid gets inside the camera,

disconnect the power cord immediately, and

consult your dealer (or a Sanyo Authorized

Service Centre). Be careful to protect the

camera from rain, sea water, etc.

Be careful when handling the unit

To prevent damages, do not drop the camera

or subject it to strong shock or vibration.

Install away from electric or magnetic

fields

If installed close to a TV, radio transmitter,

magnet, electric motor, transformer, audio

speakers the magnetic field they generate will

distort the image.

Protect from humidity and dust

To prevent damages to the camera, do not

install it where there is greasy smoke or

steam, where the dampness may get too

high, or where there is a lot of dust.

Protect from high temperatures

Do not install close to stoves, or other heat

generating devices, such as spotlights, etc., or

where it could be subject to direct sunlight, as

that could cause deformation, discoloration or

other damages.

Be careful when installing close to the ceiling,

in a kitchen or boiler room, as the

temperature may raise to high levels.

Install where the temperature range will stay

between –10˚C and 50˚C.

(no condensation)

Cleaning

•Dirt can be removed from the cabinet by

wiping it with a soft cloth. To remove

stains, wipe with a soft cloth moistened

with a soft detergent solution and wrung

dry, then wipe dry with dry soft cloth.

•Do not use benzine, thinner or other

chemical product on the cabinet, as that

may cause deformation and paint peeling.

Before using a chemical cloth, make sure

to read all accompanying instructions.

Make sure that no plastic or rubber

material comes in contact with the cabinet

for a long period of time, as that may

cause damage or paint peeling.

ENGLISH

53P2/EX GB 1998, 3, 11

2 English

PARTS NAMES

1Lens iris output connector (4 pin)

This 4-pin connector is used to send the DC control signal and

power supply to an auto-iris type lens.

2Auto white balance push lock button (AWB LOCK)

3Menu setting button (SET)

Connect the camera to the monitor, then press the SET button

for about 3 seconds to display the on-screen menu.

4Cursor button (C RSOR)

j: Press this button to move the cursor up.

c: Press this button to move the cursor to the right, or to

turn the settings ON/OFF etc.

d: Press this button to move the cursor to the left, or to

turn the settings ON/OFF.

l: Press this button to move the cursor down.

5Flange-back lock screw (FLANGE BACK LOCK)

6Flange-back adjustment screw (FLANGE BACK ADJ.)

7Lens mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold

separately).

8Camera installation bracket

The bracket can be fixed at the top or bottom of the camera.

When fixing the bracket, be sure to use the longer screws and

install the shorter screws on the opposite side to seal the

openings.

CA TION:

When installing the camera support, select a location

that can support the total weight of the camera and

accessories.

1232

1Shorter screws: M3 x 4

2Longer screws: M3 x 6

3Camera mounting

screw hole:

1/4"-20 NC

53P2/EX GB 1998, 3, 11

English 3

9Camera setup section (under the cover)

This unit factory settings are as indicated below. These settings

are for when using a 1/3 inch CS mount DC (without EE internal

amplifier) type lens. However, if due to installation conditions or

environment the settings may need to be modified for best

results (see "SETTINGS"). To access the controls, remove the

cover fixing screw, then remove the cover.

Control name Position

aHigh speed electronic shutter

switches (ES)

All OFF: 1/50 sec

bInternal INT only

cAuto gain control switch (AGC) ON

dWhite balance switch (WB) all ON: ATW

eBacklight compensation switch

(BLC)

fElectronic iris (EI)/

Auto iris (AI) switch

gAuto-iris lens switch (A.I. LENS) DC

Notes:

•When using a 1/2 or 2/3 inch C mount VIDEO (with EE

internal amplifier) auto-iris type lens, set the A.I. LENS switch

to the VIDEO position.

•The settings entered in the camera setup section can be

displayed using the on-screen menu.

•If not using an auto-iris lens, make sure the BLC switch is set

to OFF.

2341

6785910

INT

OFF

OFF EI

AIONES LL ON ON WB

BLCSYNC FL

AGC

53P2/EX GB 1998, 3, 11

4 English

PARTS NAMES

FVideo output connector (VIDEO O T: BNC type)

Connect this connector to a device such as a VCR or monitor

with a VIDEO IN connector.

GY/C O T connector

Using a coaxial cable (twin type, 75 ohms), connect the Y/C

O T connector from the camera to the S-VIDEO input terminal

on the monitor or time lapse VCR.

1Y signal ground

2C signal ground

3Y signal: 1.0 Vp-p, 75 ohms, unbalanced,

negative sync

4C signal: 0.3 Vp-p, 75 ohms, unbalanced

HPower indicator (POWER)

Comes on when the power to the camera is on.

IExternal sync composite video signal input connector

(VBS IN: BNC type)

Connect to this connector the synchronizing signal output from

a synchronizing signal device or the composite signal of a video

distributor.

J12 V DC input terminal (12 V DC IN)

Connect DC connecting cord from the AC adaptor to the

12V DC IN terminal on the camera.

Then, plug the AC adaptor into an AC outlet.

WARNING:

•This AC adaptor is specially conceived for this camera.

Never use another type of AC adaptor with this camera,

and do not use this AC adaptor to power other types of

cameras.

•Not for use with toys.

•Never try to disassemble or modify the AC adaptor.

53P2/EX GB 1998, 3, 11

English 5

LOCK

ADJ.

Flange-back adjustment

If the pick-up surface is not correctly positioned with relation to

the lens focal point, the picture will be out of focus (in particular

when using auto-iris power zoom lenses, sold separately). If that

is the case, adjust the flange-back position as described below.

1Using a + screwdriver, loosen the FLANGE BACK LOCK

screw (M2:+).

Set the zoom lens to the maximum telephoto position, set

the focus using the focus ring on the lens.

2Set the zoom lens to the maximum wide angle position, set

the focus using the FLANGE BACK ADJ. screw.

3Repeat steps 2 and 3, until the image stays in focus when

changing from a telephoto shot to a wide angle shot.

When the setting is complete, tighten the FLANGE BACK

LOCK screw.

MO NTING THE LENS

Check the lens mount

Do not use a lens if the length “L” is more than 5 mm. That

may damage the camera and prevent proper installation.

Installation of a DC type auto-iris lens (sold

separately)

A 1/3 inch CS mount type lens without EE amplifier circuit that

only uses a DC power source. This camera can receive (the A.I.

LENS switch to the DC type) a CS mount type lens without the

need of an adaptor.

If the lens plug shape or wiring does not correspond, please

install the supplied plug as indicated in the pin layout table.

53P2/EX GB 1998, 3, 11

6 English

MO NTING THE LENS

Installation of a VIDEO type auto-iris lens

(sold separately)

A 1/2 or 2/3 inch C mount type lens with EE amplifier circuit

that uses the video signal and a DC power source.

1Remove the lens mount cap.

2Attach the supplied C mount adaptor (A) to the auto-iris

lens (B), then install the assembly on the camera.

3Connect the lens plug to the LENS connector on the side of

the camera.

If the lens plug shape or wiring does not correspond to the

specifications below, connect the supplied plug as indicated.

•When using lenses from other makers, make sure that the

pins connections in the plug correspond to the ones of

the camera.

Refer to the lens specifications to check the pins

connections in the plug.

•If they are different than indicated, remove the original

plug and connect the supplied plug according to the

diagram.

4Set the A.I. LENS switch in the camera setup section to the

VIDEO position.

Pin layout

DC type lenses VIDEO type lenses

1Brake coil (–) +12 V DC (50 mA max.)

2Brake coil (+) Not used

3Drive coil (+) Video output (1.0 Vp-p, high

impedance)

4Drive coil (–) Ground (for video signal and DC

power)

VIDEO

2 (A) (B)

53P2/EX GB 1998, 3, 11

English 7

Compatible auto-iris lenses

1/3 inch Sanyo DC type lens 1/2 or 2/3 inch VIDEO type lens

VC -CS8 Y: Standard angle, f= 8 mm Standard angle, f= 9 mm

VC -CS4 Y: Wide angle, f= 4 mm Telephoto angle, f= 12 mm

VC -CS2 Y: Ultra-wide angle, f= 2.8 mm More telephoto angle, f= 16 mm

If using a VIDEO type auto-iris lens

•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should

be turned all the way to Av (Average).

•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust

the LEVEL volume on the lens casing to correct.

CONNECTIONS

Basic connection for monitoring or recording

The peripheral devices (VCR, monitor, lens, etc.) and cables

are sold separately.

1Make the video signal connection between the camera and

the monitor or time lapse VCR.

2Insert the plug of this power cord into a wall outlet.

The POWER indicator (A) will light. Adjust the picture on the

monitor using the Brightness and Contrast controls.

Coaxial cable type and maximum length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG-11U (7C-2V), 600 m maximum.

CA TION:

•The RG-59U type cable should not be run through electrical

conduits or through the air.

•Using CCTV/Video-grade coaxial cable.

(Video signal connections)

: VIDEO IN

: VIDEO OUT

(A)

53P2/EX GB 1998, 3, 11

8 English

SETTINGS

The illustration shows the factory default settings for the switches in the camera setup section.

Depending on the camera installation location and conditions of use, it may be necessary to select

other settings, without having to make adjustments. The selected settings can be confirmed using

the on-screen menu. If adjustments are required, they can be entered using on-screen adjustment

sub-menus (see ADJ STMENTS, page 13).

2341

6785910

INT

OFF

OFF EI

AIONES LL ON ON WB

BLCSYNC FL

AGC

High speed electronic shutter (ES) setting

Normally, the three speed setting switches (1, 2 and 3) for the

high speed electronic shutter are all set to the OFF position. This

sets the electronic shutter speed to 1/50 sec. The three switches

in the camera setup section can be set as indicated in table A to

select one of the 8 speeds available.

Notes:

•When using the high speed electronic shutter, the BLC switch

must be set to the OFF position.

•Using the high speed electronic shutter indoors with low

lighting, will give darker pictures. In such a case, add some

lights to make sure the lighting is sufficient. If the lighting is

very bright, pay attention to the light angle in order to avoid

or minimize the smear phenomenon effect.

•If IRIS is set to EI (electronic iris mode), then the high speed

electronic shutter speed will not correspond to the set speed.

Synchronisation (SYNC) setting

•The internal synchronisation is set using the SYNC switch (4)

in the camera setup section.

INT: Initial setting. The initial value cannot be changed.

•The external synchronisation (VBS, VS) cannot be set in the

camera setup section. When a VBS or VS sync signal is

entered at the camera VBS IN terminal, the camera will

automatically detect the signal type and VBS or VS will be

displayed on the on-screen menu. If necessary, the settings

can then be entered in the adjustment sub-menu (see page

14).

Table A

11/50 sec.

21/120 sec.

31/250 sec.

41/500 sec.

51/1000 sec.

61/2000 sec.

71/4000 sec.

81/10000 sec.

123

53P2/EX GB 1998, 3, 11

English 9

Table des matières

Autres manuels Sanyo Caméra de sécurité

Sanyo

Sanyo VCC-HD2300P Instructions de construction

Sanyo

Sanyo VCC-9684VA - 1/4" Color CCD Indoor Mini Dome... Manuel utilisateur

Sanyo

Sanyo VCC-3944 - 1/4" Color CCD DSP Camera Manuel utilisateur

Sanyo

Sanyo VCC-ZM600 Manuel utilisateur

Sanyo

Sanyo THINK GAIA VCC-HD4600 Manuel utilisateur

Sanyo

Sanyo VCB-3440P Manuel utilisateur

Sanyo

Sanyo VCC-HD2300 - Full HD 1080p Network Camera Manuel utilisateur

Sanyo

Sanyo VCC-6975P Manuel utilisateur

Sanyo

Sanyo VCC-ZM300 Manuel utilisateur

Sanyo

Sanyo VCC-P7574 - 1/4" Color CCD Indoor Mini Dome... Manuel utilisateur

Sanyo

Sanyo VCC-HD2100 - Full HD 1080p Network Camera Manuel utilisateur

Sanyo

Sanyo VSE-6300 SERIES Manuel utilisateur

Sanyo

Sanyo VDC-HD3500P Manuel utilisateur

Sanyo

Sanyo VCC-6594E - 1/3" CCD DSP High Sensitivity Color... Manuel utilisateur

Sanyo

Sanyo VCC-5884EA - 1/3" Color CCD DSP High-Resolution... Manuel utilisateur

Sanyo

Sanyo Colour CCD Camera VCC-5775P Manuel utilisateur

Sanyo

Sanyo VCC-5974 Manuel utilisateur

Sanyo

Sanyo VCC-N6695P Manuel utilisateur

Sanyo

Sanyo VDC-DP9585P Manuel utilisateur

Sanyo

Sanyo VCC-XZN600P Manuel utilisateur

Sanyo

Sanyo VCC-6580 Manuel utilisateur

Sanyo

Sanyo VCB-3384 Manuel utilisateur

Sanyo

Sanyo VCC-MC800P Manuel utilisateur

Sanyo

Sanyo VDC-HD3100 - Full HD 1080p Vandal Dome... Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur