Sanus CLASSIC MSF07c Manuel utilisateur
MSF07c Instruction Manual
2
Unsure? Call 1-800-359-5520
(UK: 0800-056-2853)
Does your TV weigh more than 35 lb (15.8 kg) including accessories?
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
35 lb
(15.8 kg)
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service at 1-800-359-5520 (UK: 0800-056-2853).
1
2
3
4
What is your wall made of?
Drywall with
wood studs? Perfect!
CAUTION: Avoid potential personal injuries and property damage!
• This product is designed for use in wood stud walls - DO NOT install into drywall alone
• The wall must be capable of supporting five times the weight of the TV and mount combined
• Do not use this product for any purpose not explicitly specified by manufacturer
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
?
Do you have all of the tools needed?
7/32 in.
(5.5 mm)
Wood
1/2 in.
(13 mm) 3/8 in.
(10 mm)
OPT
3
Dimensions
in.
[mm]
8.87
225.4
6.87
174.6
2.56
65.0
4.75
120.7
3.94
100.0
2.95
75.0
8.80
223.6
7.87
200.0
4.70
119.3
OFFSET
7.87
200.0
3.94
100.0
2.95
75.0
7.18
182.4
12°
20°
4
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
Parts and Hardware for STEP 1
NOTE: Not all hardware included will be used.
TV Interface Bracket/Wall Plate Assembly
01 x1
5/16 x 2 ½ in.
Lag Bolts
02 x2
5
Parts and Hardware for STEP 2
Additional Hardware
M4 x35mm
M6x35mm
M5x35mm
M4 x12mm
M6x12mm
M5x12mm
M4/M5M6
03
04
05
06
07
08
x4
x4
x4
x4
x4
x4
TV Screws Washers
Spacers
09 10
11
x4 x4
x4
*Only needed for TVs with 200x200
mm (7 7⁄8 x 7 7⁄8 in.) hole patterns
Extender Brackets* Extender Bracket Nuts*
12
13 x4
x2
7/32 in. Hex Key
14
7/32 in.
6
7
(4.7 in.)
119.3 mm
182.4 mm
(7.18 in.)
HOME
EXTENDED
Oset
IMPORTANT: When choosing a location for your TV on the wall, please keep in
mind that the TV will shift 119.3 mm (4.7 in.) from the EXTENDED to the HOME
positions.
Before You Begin - Consider TV Location and Offset
8
STEP 1 Attach Wall Plate to Wall - Wood Stud ONLY!
1. Locate your stud. Verify the center of the stud using an awl, a thin nail, or an edge to edge stud finder.
CAUTION: Avoid potential personal injuries and property damage!
ƕDrywall covering the wall must not exceed 16 mm (5/8 in.).
ƕMinimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.).
2. Level the wall plate 01 and mark the hole locations.
12
≤ 16 mm
(5/8 in.)
01
9
3. Drill pilot holes.
IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.), using a 5.5 mm (7/32 in.) diameter drill bit.
4. Tighten the lag bolts 02 only until they are pulled firmly against the wall plate 01 .
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
34
01
63.5 mm
(2½in.)
5.5 mm
(7/32 in.)
02
10
12
AB
1. Hand thread screws into the threaded inserts on the back of your TV to determine the correct screw diameter (M4, M5, or M6).
2. Determine what kind of TV you have and if you require extra space between the wall and the TV to accommodate cables.
• If you have a flat back TV and do not require extra space for cables, see STEP 2-A
• If you have an irregular back TV or need extra space to accommodate cables, see STEP 2-B
SELECT TV HARDWARE
CAUTION: Avoid potential personal injuries and property damage!
Verify that there are adequate threads to secure the brackets to the
monitor. If you encounter resistance, stop immediately and contact
customer service. Use the shortest screw and spacer combination to
accommodate your needs. Using hardware that is too long may damage
your TV.
0 0 0
STEP 2 Attach TV Bracket to TV
Table des matières
Autres manuels Sanus Support TV
Sanus
Sanus Classic MLT13 Manuel utilisateur
Sanus
Sanus Decora DST1 Manuel utilisateur
Sanus
Sanus ATVS1 Manuel utilisateur
Sanus
Sanus F107 Manuel utilisateur
Sanus
Sanus HLT1 Manuel utilisateur
Sanus
Sanus SA809 Manuel utilisateur
Sanus
Sanus VMPL3 Manuel utilisateur
Sanus
Sanus VXT5 Manuel utilisateur
Sanus
Sanus VLL5 Manuel utilisateur
Sanus
Sanus Classic MMF15 Manuel utilisateur
Sanus
Sanus Classic MLL10 Manuel utilisateur
Sanus
Sanus VLC1 Manuel utilisateur
Sanus
Sanus 65PFL5604/F7 Manuel utilisateur
Sanus
Sanus VLT5 Manuel utilisateur
Sanus
Sanus VLF525 Manuel utilisateur
Sanus
Sanus VisionMount LT25 Manuel utilisateur
Sanus
Sanus VXF730-B2 Manuel utilisateur
Sanus
Sanus New VisionMount VXF220-B1 Manuel utilisateur
Sanus
Sanus Classic MLL12 Manuel utilisateur
Sanus
Sanus F180c Manuel utilisateur
