Samsung MU-PS1T0B Mode d’emploi

User Manual and Warranty Statement

MU-PS1T0B MU-PS500B MU-PS250B

Rev. 1.0

LEGALITIES

LEGAL DISCLAIMER

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND

SPECIFICATIONS WITHOUT NOTICE.

Products and specifications discussed herein are for reference purposes only. All information discussed

herein may change without notice and is provided on an “AS IS” basis, without warranties of any kind.

This document and all information discussed herein remain the sole and exclusive property of Samsung

Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property

right is granted by one party to the other party under this document, by implication, estoppels or

otherwise. Samsung products are not intended for use in life support, critical care, medical, safety

equipment, or similar applications where product failure could result in loss of life or personal or physical

harm, or any military or defense application, or any governmental procurement to which special terms

or provisions may apply. For updates or additional information about Samsung products, contact

your nearest Samsung office. All brand names, trademarks and registered trademarks belong to their

respective owners.

Table of Contents

1. Getting Started............................................................................................................................... 4

Box Contents............................................................................................................................................. 4

System Requirements........................................................................................................................... 4

T1 File System........................................................................................................................................... 5

Capacity of T1........................................................................................................................................... 5

2. Using T1............................................................................................................................................6

Connecting to a PC................................................................................................................................. 6

Activation ................................................................................................................................................... 6

Use after Activation................................................................................................................................ 8

Configuration............................................................................................................................................ 9

3. Unmounting..................................................................................................................................11

4. Precautions ...................................................................................................................................12

5. Specifications and Certifications..........................................................................................14

6. Samsung Portable SSD T1 Limited Warranty....................................................................16

1. Getting Started

Before using your Samsung Portable SSD T1 (referred to as T1), please read the User Manual thoroughly

and use the product in a safe and appropriate manner. The images shown in this User Manual may differ

from the actual product, and the contents of this manual may be subject to change without prior notice.

❙Box Contents

*Please make sure that all the

contents are included in the box

after purchase.

Box contents may differ depending

on the packaging type.

Samsung Portable

SSD T1

User Manual and

Warranty Certificate

USB 3.0 cable

❙System Requirements

The following requirements must be met to utilize the fast data transfer speed of your T1.

1 PCs with USB 3.0 support

USB (Universal Serial Bus) is a serial input/output technology for connecting computers to

peripherals. USB 3.0 (5Gbps) supports up to 10 times faster data transfer compared to USB 2.0

(480 Mbps). The T1's data transfer speed is optimal with USB 3.0, while using a lower version

such as USB 2.0 or 1.1 will result in lower performance.

*Performance may vary depending on each user's system even when using a USB 3.0

connection. In particular, when UASP (USB Attached SCSI Protocol) is not supported,

performance may be lower. Confirm the compatibility from the host PC.

Caution: When your T1 is connected to a device that only supports USB 2.0 or 1.1, the device

may not recognize your T1 or may display a popup suggesting that formatting is required. If

your T1 is formatted as suggested in this popup, your data will be deleted permanently. Do not

format your device. When you connect your T1 to a device that supports the USB 3.0 standard,

the T1 will be recognized and you will be able to use it.

2 Connecting T1 to USB ports on devices other than PCs

Using the T1 by connecting it to devices other than PCs that support USB may be restricted

depending on the USB specifications and operating system (OS) of the devices. When using the

T1 with devices other than PCs (e.g.: TVs, printers, audio players or other devices that support

USB), please check the specifications of the devices first.

3 Recommended PC Specifications

yWindows OS: Windows 7 or higher

yMac OS: Mac 10.7 or higher

yUSB 3.0 port

PC connector Product connector

❙T1 File System

Your T1 is formatted using the exFAT file system by default to support both Windows OS and Mac OS.

Please note that there may be restrictions on reading or writing data when using your T1 on both

Windows OS and Mac OS. If you plan to only use the T1 on a single OS, it is recommended that you

format your T1 using the appropriate file system for the OS.

Important Information:

Read/write capabilities of Windows OS and Mac OS by file system.

File System Windows OS Mac OS

exFAT Both read and write Both read and write

NTFS Both read and write Read only

HFS Not recognized Both read and write

*When using exFAT on both operating systems, data writing may become locked and you may

only be able to read data. If such a problem occurs, you can restore write access by following the

instructions below.

1 Mac OS: Connect your T1 to your Mac OS again, and then eject the volume (T1).

2 Windows OS: In the notice window that appears when write access is disabled, click Scan and Fix.

Then run Check Disk (CHKDSK).

If you closed Check Disk, you can run Check Disk by selecting the drive right-click choose

Properties choose Error-Checking under the Tools tab.

*When your T1 is connected to a device other than a PC, usage may be restricted depending

on the file system supported by the OS of the device and the file system of the data stored on

your T1. Please check the device's supported file systems before use. Please note that if T1

is formatted using a different file system to use with the device, all user data will be deleted

during formatting. Once formatted, user data cannot be recovered.

❙Capacity of T1

When your T1 is connected to a PC, the capacity displayed on the system (Windows Explorer on Windows

OS) may vary from the capacity marked on the product depending on the drive's file system, partitioning

and computer system.

*The capacity marked on the product is calculated according to the standard below.

1MB = 1,000,000bytes / 1GB=1,000,000,000bytes / 1TB=1,000,000,000,000bytes

2. Using T1

Important Information:

Your T1 is partitioned into a security partition and a data storage partition by default to provide a higher

level of security. The T1 is preconfigured to display only the security partition under factory settings.

Therefore, to use the data storage partition, your T1 must be activated on a PC. The T1 cannot be

activated if the PC does not fulfill the recommended specifications or if the T1 is connected to the USB

port of a device other than a PC. Please activate the product using a PC that fulfills the recommended

specifications.

❙Connecting to a PC

Connect the T1 to a desktop PC or laptop

using a USB port as shown in the figure

below.

If connected properly, only the security

partition (128 MB on Windows 7) will be

displayed on the PC. Once the device is

activated using the following activation

software, the entire data storage partition

will be recognized by the PC.

❙Activation

Running the software

You can activate your T1 by using this software.

During the activation process, you can designate a unique name for your T1 and enable password

protection for data security.

1 In Windows Explorer (Windows OS) or Finder (Mac OS), select the T1_Setup drive launch icon.

Windows OS Mac OS

Samsung Portable SSD.exe Samsung Portable SSD.app

2 Double-click the launch icon to run the software.

3 Activating the T1

Activate the T1 by following the instructions in the software. During activation only certain files

are copied to the PC for user convenience.

To activate your Samsung Portable SSD,

please complete the following steps.

Welcome

Enter a name (max. 16 characters)

Default Name : Samsung T1

Give your Samsung Portable SSD a name

OK Yes

You may set a password if you want to keep your data secure.

Note : If you have lose your password, the T1 will be unusable and

you will no longer be able to access your data. A factory reset tool

provided by the Samsung Service Center can be used to reset the T1,

but all of your data will be permanently erased and your password will

be reset.

Enabling Data Security

1. Initial screen 2. Designating a name for

Samsung Portable SSD

*3. Select whether to enable

password protection.

*If you click No, activation will

be completed without enabling

password protection.

Set your password

Re-enter your password

Enter your password (4-16 characters)

Finish

Please review the information you have entered

Summary

Name

Security

Samsung T1

Enabled

Start over

Click Finish to complete setup and begin using your Samsung Portable SSD.

4. Set a password (if enabled) 5. Summary (if enabled)

*You can start again from the name

settings by clicking Start Again.

Important Information: On Mac OS, an SAT driver installation screen may appear when the

software runs. SAT driver is a mandatory system driver for running the T1 activation software.

If you do not install the SAT driver, you will not be able to use T1 on a Mac OS. Install the SAT

driver according to the instructions in the installation software. Once the SAT driver is installed,

disconnect and re-connect the T1 to confirm that the driver has been installed successfully.

Important Information: The manufacturer and retailer are not liable for loss of user data caused by

forgotten or stolen passwords. If you forget your password, your T1 can be restored to its factory

settings at a Samsung Service Center. However, all user data will be lost in the process. If you

enabled password protection, please exercise caution not to forget or misplace your password. It

is not possible to restore the product to its factory settings at the Service Center while preserving

user data.

❙Use after Activation

Once activated, you can use the data storage partition of the T1. Depending on whether password

protection was enabled or not during the activation process, usage of the T1 varies as described below.

1 If password protection was enabled in the activation process:

When you connect the product to a PC, a login screen appears. You must enter your password and

click the Login button to access the data.

Name

Password

Samsung T1

Enter your password

Samsung Portable SSD

*If you connect the T1 to a different PC and the login screen does not appear, double-click on

the T1_setup drive icon to display the login screen.

Restrictions: Password protection works properly only on certain versions of Windows OS or Mac OS.

If password protection is enabled, you will not be able to use the T1 with devices other than PCs, even

if the device supports USB, due to system differences. If you plan to use T1 with devices other than

PCs, please disable password protection. You can disable password protection by navigating to the

Profile screen of the product from the Home screen.

2 If you did not enable password protection in the activation process, you can start using the

product without additional settings.

Caution: Even if password protection was not enabled, the T1 may not function properly

when connected to a device other than a PC with USB support, depending on specific system

conditions. Please check the USB connection and supported file systems for the device you

wish to use with T1.

Note: If you use password protection, a separate setting is required as the activation process has

already been completed. You can enable password protection using the T1 icon ( ) in the taskbar

notification area of the PC where the activation process was performed. In other PCs, you can enable

password protection after downloading “Samsung Portable SSD.exe” from the Samsung website.

(

http://www.samsung.com/ssd

) In Mac OS, you can enable password protection after downloading

“Samsung Portable SSD.app”.

❙Configuration

If you wish to change the name, password, or enable/disable password protection, you can do so by

navigating to the Profile screen of the product from the Home screen.

1 Description of key screens

Home screen: This is the screen that displays the status of the connected product.

When you choose the preferred product, you will be prompted with the profile screen where you can

activate or change the setting.

Samsung T1 Unlocked

Samsung Portable SSD Home

Home screen

The status of the T1 is displayed using one of the four status icons, depending on the settings.

Status Description

New

This is the factory setting before activation. You can proceed with activation by

pressing the Add user icon ( ).

Locked

This is when password protection is enabled and the correct password has not been

entered. You can go to the login screen by clicking the Enter Password ( ) icon.

Unlocked

This is when password protection is enabled and the correct password has been

entered. You can go to the Profile screen to change settings by clicking the Settings

() icon.

No Password

This is when password protection is disabled. You can go to the Profile screen to

change settings by clicking the Settings ( ) icon.

Profile screen: The Profile screen shows the details of the connected T1 product. You can change its

name, password and password protection status from the Profile screen. Password protection status

is shown as below.

Name

Samsung T1

Total Space

238.5 GB

Security

Enabled

Serial number

A2HL -TlAW -4595 - 75K

Free Space

153.2 GB

Password

Set

Samsung Portable SSD

Home

Name

Samsung T1

Total Space

238.5 GB

Security

Disabled

Serial number

A2HL -TlAW -4595 - 75K

Free Space

153.2 GB

Home

Samsung Portable SSD

If password protection was enabled during activation If password protection was not enabled during activation

2 How to access the Home screen

In Windows OS Select the icon ( ) in the taskbar notification area, right-click, then select Open to

access the Home screen.

In Mac OS Click the T1 icon ( ) on the Desktop to access the Home screen.

3 How to access the Profile screen

Select the T1 icon ( ) in the taskbar notification area, right-click, then select the product under the

Settings menu or select the product from the Home screen to access the Profile screen.

Name

Samsung T1

Total Space

238.5 GB

Security

Enabled

Serial number

A2HL -TlAW -4595 - 75K

Free Space

153.2 GB

Password

Set

Samsung Portable SSD

Home

Autres manuels pour MU-PS1T0B

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Stockage

Samsung

Samsung HX-DE010EB Manuel utilisateur

Samsung

Samsung HX-MU010EA Guide de l'utilisateur

Samsung

Samsung 840 EVO Manuel utilisateur

Samsung

Samsung SP0401N Manuel utilisateur

Samsung

Samsung G2 PORTABLE HX-MU050DC Manuel utilisateur

Samsung

Samsung Spinpiont HD320KJ Manuel utilisateur

Samsung

Samsung Spinpoint M9TU Manuel utilisateur

Samsung

Samsung HX-DT015EB Manuel utilisateur

Samsung

Samsung HXDU010EB - Story Station 1 TB External Hard... Guide de l'utilisateur

Samsung

Samsung D3 Station Manuel utilisateur

Samsung

Samsung MZ-5PA064B Manuel utilisateur

Samsung

Samsung HX-MTA50DA Manuel utilisateur

Samsung

Samsung T7 Touch Manuel utilisateur

Samsung

Samsung MUXONENAND A-DIE KFN4G16Q2A Manuel utilisateur

Samsung

Samsung SP0211N Manuel utilisateur

Samsung

Samsung HX-MTA50DA Guide de l'utilisateur

Samsung

Samsung ELSR362-00002 Manuel utilisateur

Samsung

Samsung HXMU050DA - S2 Portable 500 GB External Hard... Manuel utilisateur

Samsung

Samsung HU030HA Manuel utilisateur

Samsung

Samsung G2 PORTABLE HX-MU025DC Manuel utilisateur

Samsung

Samsung HN-M101MBB Manuel utilisateur

Samsung

Samsung SP0401N Manuel utilisateur

Samsung

Samsung STORY Station HX-DU050DB Manuel utilisateur

Samsung

Samsung G2 PORTABLE HX-MU025DC Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur