Samsung SP-H500 Manuel utilisateur
Owner's Instructions
SP-H700/H710/H500
Connections and Source Setup
Before Connections ............................................22
Connecting to Video Equipment
Connecting to VCR/Camcorder/Cable Box ..........23
Connecting to DVD ............................................24
Connecting to the Digital TV Receiver..................25
Setting up the External Input Source ................26
Naming the External Connections ....................27
Preparation
Features and Design..............................................4
Caution on Lamp Use and Replacement..............5
Projector and Accessories
Front/Upper Side and Accessories........................8
Rear Side and Cables ........................................10
Remote Control Buttons ....................................11
Operating the Remote Control............................12
Installation and Basic Adjustments
Installation and Turning On ..............................14
Zooming and Focus Adjustment..........................16
Leveling with Adjustable Feet ............................17
Using the Lens Shift Dial....................................18
Screen Size and Projection Distance....................19
Preparation Table of Contents
2
Table of Contents
Setup
Flipping/Reversing the Projected Image ........44
Light Setting ........................................................45
Correcting Vertical Keystone ............................46
Test Patterns ......................................................47
Restoring the Factory Default Settings............48
Information..........................................................49
Picture Adjustment
Selecting Picture Mode ......................................30
Custom Settings of the Picture..........................31
Changing the Color Standard ............................32
Selecting and Adjusting Color Temperature ....33
Gamma Correction ..............................................34
Saving Custom Picture Settings ........................35
Setting up DNle ..................................................36
Selecting Picture Size..........................................37
Screen Position Adjustment ..............................39
Film Mode ............................................................40
Overscan ..............................................................41
Still Picture ..........................................................42
Preparation Table of Contents
3
Menu Option
Setting the Language..........................................52
Setting the Menu Position..................................53
Setting the Menu Translucency..........................54
Setting the Menu Display Time..........................55
Selecting Quick Menu..........................................56
Connecting to PC
Before Connecting to PC ....................................58
Setting up the PC Environment..........................59
Connecting to PC..................................................60
Automatic Picture Adjustment ..........................62
Frequency Adjustment ........................................63
Fine Tuning with the Phase Adjustment ..........64
Zooming the Screen ............................................65
Reset the PC ........................................................66
Troubleshooting
Before Contacting Service Personnel................68
Other Information
Storage and Maintenance ..................................72
Purchasing Optional Parts..................................73
Structure of Screen Menu ..................................74
Lamp Replacement ..............................................77
RS-232C Connection and Control ......................78
Specifications ......................................................80
Remote Control Specifications ..........................81
Preparation Features and Design
4
Features and Design
■SP-H700/SP-H710: DLPTM HD2+DMD panel capable of 1280x720 resolution
■SP-H500: DLPTM ED2+DMD panel capable of 1024x576 resolution
■5X-speed color wheel designed to reduce digital artifacts
■250W Lamp designed to improve luminance
Optical engine adopting advanced DLP technology
■Quality picture tuning focused on improving color - this unit aims at
realizing color coordinates that meet broadcasting standards on
video production.
Vivid colors
■The airflow and fan installation structure are optimized to minimize
fan noise and beam leakage.
Minimized fan noise and light leakage
■Five types of input ports including a DVI-D (compatible with HDCP)
port, two Component ports improve connection to external
peripherals.
Various Input Ports
■This unit allows adjustment of each input port.
■The unit has a reference pattern that can be used for positioning and
adjustment.
■The remote control is backlit to improve usability in a dark
environment.
User adjustments
Caution on Lamp Use and Replacement
Preparation Caution on Lamp Use and Replacement
5
■The Projector lamp changes in nature depending on time of use and
using environment. Refer to the installation and other
recommended operational sections of the user’s manual to avoid
rapid degradation of performance and deterioration of picture
quality. The projector lamp requires regular replacement.
■Free servicing will be offered within 90 days after purchasing of the
product and within 300 hours of product use, if the problem is due
to a defective lamp.
■You can check the lamp use time by pressing the INFO button on
the remote control.
Projector Lamp
■Unplug the power cord before replacing the lamp.
■Inside of the projector is very hot. Cool off the projector for at least
an hour after turning off.
■Contact your dealer to purchase a lamp for replacement.
(Ultra violets from the lamp can damage your eyes.)
■Turn off the power of the lamp before replacement or repair.
(Due to the high-pressure of the lamp, it is possible to explode.)
■When the lamp is broken, be careful not to be hurt by glass pieces.
Refer to the manual for proper handling.
Caution on Lamp Replacement
■This projector produces intense light. Do not stare light source
directly.
■Do not touch the exhaust vent during operation. It can be very hot.
■Do not expose the unit to rain or moisture.
Caution on Lamp Use
Preparation
Projector and Accessories ............................8
Installation and Basic Adjustments ..........14
VISUAL REALISM
Front/Upper Side
PROJECTOR AND ACCESSORIES
Front/Upper Side and Accessories
Preparation Projector and Accessories
8
11
Indicators
-
TEMP (Red LED)
-
LAMP (Blue LED)
-
STAND BY (Blue LED)
Refer to page 9 for details.
22
Remote Control Signal Receiver
33
Focus Ring
Used for Focus Adjustment.
44
Lens
55
Adjustable Feet
You can adjust the screen position by moving
up and down the adjustable feet.
66
Zoom Knob
Used to enlarge or reduce image size.
77
MENU
Used to open the on-screen Menu.
88
POWER
Used to turn the projector on or off.
99
SOURCE
Used to select input signals from the external
sources.
1100
Select and Move Button
Used to select an menu item, and to move the
cursor.
1111
LENS SHIFT Dial
You can adjust screen images up and down
within the lens range.
Remote Control/
2 Batteries
Power Cable Owner's Instructions
1
2
3
4
5
6
7
8
9
10
11
Accessories
Preparation Projector and Accessories
9
: Turned On : Flashing : Turned Off
STANDBYLAMPTEMP
Information
If you press the POWER button on the remote control or projector, the screen
appears within 30 seconds.
The projector is in normal operating condition.
The projector is warming up after POWER button has been pressed.
The POWER button is pressed to turn off the projector, and the cooling system is
in operation to cool off inside of the projector. (Lasts for about 1 minute and 30
seconds)
Refer to measure 1 below if the cooling fan inside the projector is not in normal
operation condition.
Refer to measure 2 below if the lamp cover protecting the lamp unit is not closed
properly.
Power is turned off automatically when temperature inside of the projector goes
beyond the control limit. Refer to measure 3.
Refer to measure 4 below if the life span of the lamp is running out or a problem
with the lamp is detected.
When the cooling fan system is
not in normal operating condition.
When the lamp cover protecting
the lamp unit is not properly
closed or the sensor system is not
in normal operating condition.
When temperature inside of the
projector becomes too high.
The lamp is malfunctioning after
abnormal power off or restarting
right after turning off the projector.
When brightness of the picture
screen degrades or image
deterioration is found.
Unplug and plug the cord and restart the projector. If the
problem does not disappear, contact a dealer or service
personnel near you.
Check the screw on the bottom side of the projector. If you
do not find any problem, contact a dealer or service
personnel near you.
Adjust the position of the projector following the
installation instructions of this manual and cool off the
projector before restarting it. If the problem does not
disappear, contact a dealer or service personnel near you.
Power off the projector and cool it off for some time before
restarting it.
Check how long the lamp has been used on Information
and contact a dealer or service personnel near you for lamp
replacement.
Measure 1
Measure 2
Measure 3
Measure 4
Indicator Information
Classification State Measures
Clearing Indicator Problems
NOTE
This Projector uses a cooling fan system to keep the unit from overheating.
Operation of the cooling fan may cause noise, which does not affect the product performance.
No exchange or refund for the noise concern.
Preparation Projector and Accessories
10
PROJECTOR AND ACCESSORIES
Rear Side and Cables
Rear Side
Power Cord
Connected to the wall
outlet ∏.
Video (COMPOSITE) Cable
Connected to the
connection port ˇ.
S-Video Cable
Connected to the
connection port ´.
Component Cable
Connected to the
connection port ’.
PC Video Cable
Connected to the
connection port Ø.
DVI-D Cable
Connected to the
connection port ˆ.
11
Remote Control Signal Receiver
22
S-VIDEO Input port
33
COMPOSITE Input ports
44
RS-232C port
55
DVI Input port
66
PC Input port
77
AC Power Input
88
Power Switch
99
Component Input port
1 2 3 4 5
7
6
98
Cables
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Samsung Projecteur
Samsung
Samsung THE FREESTYLE SP-LFF3CLAXXXY Manuel utilisateur
Samsung
Samsung BP59-00140E-01 Manuel utilisateur
Samsung
Samsung SP-M221 Manuel utilisateur
Samsung
Samsung SP-P310ME Manuel utilisateur
Samsung
Samsung SP-A8000 Manuel utilisateur
Samsung
Samsung SP-L220 Manuel utilisateur
Samsung
Samsung SDP-900DXA Manuel utilisateur
Samsung
Samsung SP-D300B Manuel utilisateur
Samsung
Samsung SP-A800B(H6HA) Guide d'installation
Samsung
Samsung SP-P310ME Manuel utilisateur
Samsung
Samsung BP59-00092G-03 Manuel utilisateur
Samsung
Samsung SP-A800B Manuel utilisateur
Samsung
Samsung BP59-00092H-05 Manuel utilisateur
Samsung
Samsung SP-A900B Manuel utilisateur
Samsung
Samsung SP-D300B Manuel utilisateur
Samsung
Samsung SP-A800B Manuel utilisateur
Samsung
Samsung SP-L330W - LCD Proj XGA 500:1 3330 Lumens HDmi S-vid 8.4LBS... Manuel utilisateur
Samsung
Samsung SP-M206 Manuel utilisateur
Samsung
Samsung SP-M220W Manuel utilisateur
Samsung
Samsung SDP-760 Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
