Ruijie RG-AP880-AR Manuel d'installation et d'exploitation

Ruijie RG-AP880-AR Access Point

Hardware Installation and Reference Guide

Document Version: V1.1

Date: 2022.09.08

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this

document or any portion of this document, in any form or by any means, without the prior written consent of

Ruijie Networks is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective

owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of

the products, services or features described in this document may not be within the scope of your purchase or

use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement

or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder

any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by

vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1- n

times.

Double slashes at the beginning of a line of code indicate a

comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purpose only. In case of any discrepancy or inconsistency between the manual and the actual

version, the actual version prevails.

2-3

Ruijie RG-AP880-AR Wireless Access Point Hardware Installation Guide

Product Introduction

1 Product Introduction

1.1 Product Overview

RG-AP880-AR is an IEEE 802.11ax-compliant wireless access point (AP) released by Ruijie Networks for indoor scenarios

in the higher education, government, general education, finance, and business sectors. It supports four radios, among

which the 2.4 GHz band can provide a maximum access rate of 875 Mbps and the 5 GHz band can provide a maximum

access rate of 8.067 Gbps. In this way, this AC can provide a maximum access rate of 8.642 Gbps, which breaks through

the bottleneck in wireless performance.

Important factors such as the wireless network security, radio control, mobile access, Quality of Service (QoS), and

seamless roaming are fully taken into account for the RG-AP880-AR. Therefore, the RG-AP880-AR can be used together

with Ruijie's access controllers (ACs) to implement STA data forwarding, security, and access control.

The RG-AP880-AR can work in IEEE 802.11ax, 802.11ac, and 802.11n modes simultaneously. It can be mounted onto a

wall, ceiling, and other similar locations. Moreover, the RG-AP880-AR supports local power supply and power over

Ethernet (PoE), which can be selected based on power supply conditions. It is especially applicable to large campuses,

enterprise offices, hotspots, and other densely populated scenarios.

1.2 Product Appearance

The RG-AP880-AR provides four RF ports, two Ethernet copper ports, one 5 Gbps SFP port, one RJ45 console port, one

power socket for an external power adapter, one USB port, and one reset button. For the two Ethernet copper ports, LAN

1 port supports IEEE 802.3af/at/bt-compliant PoE and LAN 2/IoT port can be used to supply power to the IoT module (48

V/0.27 A, Max.: 12.95 W). The following figures show the product appearance.

Figure 1-1 Top View

2-4

Ruijie RG-AP880-AR Wireless Access Point Hardware Installation Guide

Product Introduction

Figure 1-2 Top

Table 1-1 LED on the Top

No.

Item

Description

LED

Used to show the running status of the system

Figure 1-3 Side

Table 1-2 Button and Ports

No.

Item

Description

USB port

Used for a USB connection

2-5

Ruijie RG-AP880-AR Wireless Access Point Hardware Installation Guide

Product Introduction

No.

Item

Description

DC power port

Connected to a 54 V DC power adapter to supply power to an AP

LAN 1/PoE port

Uplink service port for a wired Ethernet connection and data transmission,

supporting IEEE 802.3af/at/bt-compliant PoE

LAN 2/IoT port

Downlink service port for a wired Ethernet connection and data transmission,

supporting power supply to the IoT module (48 V/12.95 W)

Console port

Connected with a serial port cable for device management

Reset button

Used to reboot the device or restore the device to factory settings

5 Gbps SFP port

Uplink service port for data transmission

Anti-theft lock hole

Connected to the anti-theft lock

Figure 1-4 Bottom

2-6

Ruijie RG-AP880-AR Wireless Access Point Hardware Installation Guide

Product Introduction

1.3 Package Contents

Table 1-3 Package Contents

No.

Item

Quantity

Mounting bracket

Wall anchor

Phillips pan head screw 4.2 ×20

Warranty card and list of hazardous substances

Installation Guide

1.4 Technical Specifications

1.4.1 Dimensions and Weight

Table 1-4 Dimensions and Weight

Dimensions and Weight

RG-AP880-AR

AP Dimensions (W ×D ×H)

230 mm ×230 mm ×51 mm (9.06 in. ×9.06 in. ×2.01 in.)

Weight

AP: 1.0 kg (2.20 lb.)

Mounting bracket: 0.1 kg (0.22 lb.)

Mounting Mode

Ceiling/wall-mountable

Anti-theft Lock

Kensington lock and security screw

Mounting Bracket Dimensions

(W ×D ×H)

120 mm ×120 mm ×8 mm (4.72 in. ×4.72 in. ×0.31 in.)

Mounting Hole Pattern

53 mm ×53 mm (2.09 in. ×2.09 in.)

For details, see 3.2 Before You Begin.

Mounting Hole Diameter

6.5 mm (0.26 in.)

2-7

Ruijie RG-AP880-AR Wireless Access Point Hardware Installation Guide

Product Introduction

1.4.2 RF Specifications

Table 1-5 RF Specifications

RF Specifications

RG-AP880-AR

RF Design

Four radios: Among the four RF ports, the fourth RF port can switch between 2.4 GHz

and 5 GHz bands.

Up to 10 spatial streams

Radio 1: 2.4 GHz, 2 spatial streams: 2 ×2, MU-MIMO

Radio 2: 5 GHz, 2 spatial streams: 2 ×2, MU-MIMO

Radio 3: 5 GHz, 4 spatial streams: 4 ×4, MU-MIMO

Radio 4: 2.4 GHz/5 GHz, 2 spatial streams: 2 ×2, MU-MIMO

Operating Bands

IEEE 802.11b/g/n/ax: 2.400 GHz to 2.4835 GHz

IEEE 802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.725 GHz to 5.850 GHz

(Note: The operating band varies in different countries.)

Transmission Rate

Radio 1: 2.4 GHz, 575 Mbps

Radio 2: 5 GHz, 2.4 Gbps

Radio 3: 5 GHz, 4.8 Gbps

Radio 4: 2.4 GHz/5 GHz, 300 Mbps/867 Mbps

Max. Access Rate of the AP

2.4 GHz + 5 GHz + 5 GHz + 2.4 GHz/5 GHz, 8.075 Gbps/8.642 Gbps

Antenna Type

Built-in omnidirectional antenna

Antenna Gain

3 dBi

Max. Transmit Power

20 dBm

(Note: The transmit power varies based on the regulations in different countries and

regions.)

Transmit Power Adjustment

Configurable in increments of 1 dBm

Modulation Modes

IEEE 802.11b: BPSK, QPSK, CCK

IEEE 802.11a/g/n: BPSK, QPSK, 16-QAM, and 64-QAM

IEEE 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, and 256-QAM

IEEE 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Receiver Sensitivity

IEEE 802.11b: –96 dBm (1 Mbps), –93 dBm (5 Mbps), –89 dBm (11 Mbps)

IEEE 802.11a/g: –91 dBm (6 Mbps), –85 dBm (24 Mbps), –80 dBm (36 Mbps), –74

dBm (54 Mbps)

IEEE 802.11n: –90 dBm@MCS0, –70 dBm@MCS7, –89 dBm@MCS8, –68

dBm@MCS15

IEEE 802.11ac: HT20: –88 dBm (MCS0), –63 dBm (MCS9)

IEEE 802.11ac: HT40: –85 dBm (MCS0), –60 dBm (MCS9)

IEEE 802.11ac: HT80: –82 dBm (MCS0), –57 dBm (MCS9)

IEEE 802.11ax: HE80: –82 dBm (MCS0), –57 dBm (MCS9), –52 dBm (MCS11)

IEEE 802.11ax: HE160: –79 dBm (MCS0), –53 dBm (MCS9), –50 dBm (MCS11)

2-8

Ruijie RG-AP880-AR Wireless Access Point Hardware Installation Guide

Product Introduction

1.4.3 Ports

Table 1-6 Ports

IPorts

RG-AP880-AR

Bluetooth

Bluetooth 5.1

USB Port

USB 3.0

Fixed Service Ports

Uplink: One 100/1000/2500/5000Base-T auto-sensing Ethernet port, supporting IEEE

802.3af/at/bt-compliant PoE

One 5GE SFP combo port，compatible with 1/2.5GE SFP ports

Downlink: One 10/100/1000Base-T auto-sensing Ethernet port, supporting power

supply to the IoT module (48 V/12.95 W)

Fixed Management Port

One RJ45 console port

Status LED

One system status LED

Button

One reset button

1.4.4 Power Supply and Consumption

Power Supply and

Consumption

RG-AP880-AR

Power Supply

1. DC power adapter: 54 V/1.1A

2. PoE/PoE+/PoE++ (IEEE 802.3af/at/bt-compliant)

IEEE 802.3bt power supply is recommended, because the AP can work with optimal

performance in this mode.

Power Supply to External

Devices

Supported. The IoT module can be expanded through an Ethernet port.

Max. Power Consumption

40 W

The power adapter is optional. If you need to use a DC power adapter for power supply, please purchase an adapter

that meets the corresponding safety requirements.

To power the AP by using PoE, ensure that the device at the other end of the Ethernet cable supports IEEE 802.3af

power supply.

The AP adopts the fan-free design. Therefore, maintain sufficient clearance around the AP for air circulation.

By default, the AP works with IEEE 802.3at power supply. To enable the functions that are available in IEEE 802.3bt

power supply mode, run the related commands.

If IEEE 802.3af power supply is adopted, the AP can be normally powered on, but only one stream is available for

2.4 GHz and 5 GHz, and the downlink port and USB port cannot supply power to external devices.

If IEEE 802.3at power supply is adopted, the AP can be normally powered on, but the downlink port and USB port

cannot supply power to external devices.

Table des matières

Autres manuels Ruijie Point d'accès sans fil

Ruijie

Ruijie Reyee Series Dimensions

Ruijie

Ruijie HA3515-DG Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP520 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-MAP852-SF-S Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP2200 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP180P-L Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP680-IO Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP840-I (V2) Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP1201 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP840-L Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP820-I Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP680-A Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP850-I-V2 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP1260 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP210-L Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP680P-L Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-SAP845-SP Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP680-L Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP680-O Manuel utilisateur

Ruijie

Ruijie RG-AM5532 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP810-L Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP2200 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP130(L) Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP110-L Manuel d'installation et d'exploitation

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur