RS PRO RS 1107-UT Manuel utilisateur
H88.0.2X.DK2RS-1.0
Operating Manual
EN
RS 1107-UT Stock number: 205-0963
RS 1113-UT Stock number: 205-0964
rspro.com
page 2 of 24 Operating Manual RS 1107, RS 1113
rspro.com
Table of contents
1 About this documentation......................................................4
1.1 Purpose of the document................................................................4
1.2 Legal notices..................................................................................4
1.3 Further information.........................................................................4
2 Safety.......................................................................................5
2.1 Explanation of safety symbols ........................................................5
2.2 Foreseeable misuse .......................................................................5
2.3 Safety instructions..........................................................................6
2.4 Intended use...................................................................................6
3 The product at a glance..........................................................7
3.1 The RS 1100 manometer series.....................................................7
3.2 Display elements............................................................................7
3.3 Operating elements........................................................................8
3.4 Connections ...................................................................................9
4 Operation...............................................................................10
4.1 Opening the configuration menu...................................................10
4.2 Open the adjustment menu...........................................................12
5 Measurement Basics.............................................................13
5.1 Special functions ..........................................................................13
5.1.1 NVLL Tare function.........................................................................14
5.1.2 F,NE High-resolution measurement with 0.1 Pa (RS 1107)............14
5.1.3 F,NE High-resolution measurement with 1 Pa (RS 1113)...............15
5.1.4 AVR0:02 / AVR0:05 / AVR0: 10........................................................16
6 Operation and maintenance.................................................17
6.1 Operating and maintenance notices..............................................17
6.2 Battery..........................................................................................17
Operating Manual RS 1107, RS 1113 page 3 of 24
6.2.1 Battery indicator............................................................................17
6.2.2 Changing battery..........................................................................17
7 Error and system messages.................................................18
8 Technical data .......................................................................20
8.1 RS 1107.......................................................................................20
8.2 RS 1113.......................................................................................22
9 Service ...................................................................................24
9.1 Manufacturer................................................................................24
page 4 of 24 Operating Manual RS 1107, RS 1113
rspro.com
1 About this documentation
1.1 Purpose of the document
_
–This document is intended as a quick reference option.
1.2 Legal notices
This document is entrusted to the recipient for personal use only. Any impermissible
transfer, duplication, translation into other languages or excerpts from this operating
manual are prohibited.
The manufacturer assumes no liability for print errors.
1.3 Further information
_
Software version of the product:
–V1.1 or later
_
For the exact product name, refer to the type plate on the rear side of the product.
Operating Manual RS 1107, RS 1113 page 5 of 24
2 Safety
2.1 Explanation of safety symbols
_
DANGER
This symbol warns of imminent danger, which can result in death, severe bodily injury,
or severe property damage in case of non-observance.
_
CAUTION
This symbol warns of potential dangers or harmful situations, which can cause damage
to the device or to the environment in case of non-observance.
_
NOTE
This symbol indicates processes, which can have a direct influence on operation or
can trigger an unforeseen reaction in case of non-observance.
2.2 Foreseeable misuse
_
The fault-free function and operational safety of the product can only be guaranteed if
applicable safety precautions and the device-specific safety instructions for this docu-
ment are observed.
If these notices are disregarded, personal injury or death, as well as property damage
can occur.
DANGER
Incorrect area of application!
In order to prevent erratic behaviour of the product, personal injury and property
damage, the product must be used exclusively as described in the chapter Description
in the operating manual.
–The product is not suitable for use in explosion-prone areas!
–The product must not be used for diagnostic or other medical purposes on pa-
tients!
–For measurements requiring devices that are subject to authorisation or special
approvals, this product is not a substitute for such products and can only be used
as an aid in preparatory or comparison measurements!
page 6 of 24 Operating Manual RS 1107, RS 1113
rspro.com
_
2.3 Safety instructions
_
NOTE
This product does not belong in children's hands!
2.4 Intended use
_
_
_
The device is designed as a manometer and measures even the smallest pressure
differential pressures of up to ±200 hPa with a maximum resolution of up to 0.1 Pa in
air or in non-corrosive/non-ionising gases between the two pressure connections.
RS 1107
RS 1113
Differential pressure
±200 hPa
±2000 hPa
Max. resolution
0.1 Pa
1 Pa
Usual applications include precise measurements of filter condition, gas flow pressure,
draught, leak integrity, dynamic pressure flow speed.
The pressure connection is made at the supplied interchangeable pressure connection
ports with suitable hoses.
The product must only be used under the conditions and for the purposes for which it
was designed.
It must be handled with care and used according to the technical data (do not throw,
strike, etc.). Suitable measures must be used to protect the pressure connections and
be protected from dirt and moisture.
Operating Manual RS 1107, RS 1113 page 7 of 24
3 The product at a glance
3.1 The RS 1100 manometer series
LCD Display
Front view
Top view
3.2 Display elements
_
Display
_
Battery indicator
Evaluation of the battery status
_
Unit display
Display of the units or Min/Max/Hold information
text
_
Main display
Measurement of the current pressure or value for
min/max/hold
_
Auxiliary display
Measurement of the current pressure in
Min/Max/Hold mode
_
Bar graph
Trend display with the special function F,NE
page 8 of 24 Operating Manual RS 1107, RS 1113
rspro.com
3.3 Operating elements
_
On / Off button
Press briefly
Switch on the product
Activate / deactivate lighting
Long press
Switch off the product
Reject changes in a menu
_
Up / Down button
Press briefly
Display of the min/max value
Change value of the selected parameter
Long press
Reset the min/max value of the current measure-
ment
Both simultaneously
Rotate display, overhead display
_
Operating Manual RS 1107, RS 1113 page 9 of 24
Function key
Press briefly
Freeze measurement (Hold)
Return to measurement display
Call up next parameter
Long press, 2s
Start menu configuration, (ONF appears in the
display
Close menu, changes are saved
Long press, 4s
Depending on the selected special function: Activa-
tion of the Tare function NVLL, high-resolution
measurement F,NE or rapid measurement with
mean value AVR
3.4 Connections
Universal connection
Interchangeable pressure connection via G1/8"
thread.
page 10 of 24 Operating Manual RS 1107, RS 1113
rspro.com
4 Operation
4.1 Opening the configuration menu
1. Press the Function key for 2 seconds to open the Configuration menu.
2. (ONF appears in the display. Release the Function key.
_
Parameter
Values
Meaning
_
Display unit
UN,T
Pa
(only at RS 1107 )
HPa
mBaR
BaR
(only at RS 1113 )
PSI
mmKG
_
Activatable special functions
NVLL
Tare function available
F,NE
High-resolution measurement with 0.1 Pa (RS
1107) or 1 Pa (RS 1113) activatable
AVR 0:02 / AVR
0:05 / AVR 0: 10
Rapid measurement with mean value over 2 s / 5 s
/ 10 s activatable
_
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels RS PRO Instrument de mesure
RS PRO
RS PRO ICM A6N Manuel utilisateur
RS PRO
RS PRO RS-135 Manuel utilisateur
RS PRO
RS PRO RS-9968BT Manuel utilisateur
RS PRO
RS PRO RS-326 Manuel utilisateur
RS PRO
RS PRO ICM 20 Manuel utilisateur
RS PRO
RS PRO 1389 Manuel utilisateur
RS PRO
RS PRO SLM 1353M Manuel utilisateur
RS PRO
RS PRO RSSA3000X Manuel utilisateur
RS PRO
RS PRO RS-5200 Manuel utilisateur
RS PRO
RS PRO RM-804 Manuel utilisateur
RS PRO
RS PRO RS-3809 Manuel utilisateur
RS PRO
RS PRO 236-9298 Manuel utilisateur
RS PRO
RS PRO RS-90 Manuel utilisateur
RS PRO
RS PRO RS-320B Manuel utilisateur
RS PRO
RS PRO 877-1791 Manuel utilisateur
RS PRO
RS PRO RS-136 Manuel utilisateur
RS PRO
RS PRO IM-194 Manuel utilisateur
RS PRO
RS PRO IM-502 Manuel utilisateur
RS PRO
RS PRO RS 1400 Series Manuel utilisateur
RS PRO
RS PRO DT-388 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur