RS PRO RSSA3000X Manuel utilisateur
Quick Guide
RSSA3000X
Spectrum Analyzer
\
2
3
General Safety Summary
Carefully read the following safety precautions to avoid any personal
injury or damage to the instrument and any products connected to it.
To avoid potential hazards, please use the instrument as specified.
Use Proper AC Power Line
Only the power cord designed for the instrument and authorized by
local country should be used.
Ground the Instrument
The instrument is grounded through the protective earth conductor of
the power line. To avoid electric shock, please make sure the
instrument is grounded correctly before connecting its input or output
terminals.
Connect the Probe Correctly
If a probe is used, do not connect the ground lead to high voltage since
it has isobaric electric potential as the ground.
Look Over All Terminals’ Ratings
To avoid fire or electric shock, please look over all ratings and sign
instruction of the instrument. Before connecting the instrument, please
read the manual carefully to gain more information about the ratings.
Use Proper Overvoltage Protection
Make sure that no overvoltage (such as that caused by a thunderstorm)
can reach the product, or else the operator might be exposed to danger
of electrical shock.
Electrostatic Prevention
Operate the instrument in an electrostatic discharge protective area
environment to avoid damages induced by static discharge. Always
ground both the internal and external conductors of the cable to release
static before connecting.
Maintain Proper Ventilation
Inadequate ventilation may cause an increase in the instrument’s
temperature, which will eventually damage the instrument. So keep well
ventilated and inspect the intake and fan regularly.
Avoid Exposed Circuit or Components
Do not touch exposed contacts or components when the power is on.
Do Not Operate Without Covers
Do not operate the instrument with covers or panels removed.
Use Only the Specified Fuse.
Keep Product Surfaces Clean and Dry
To avoid the influence of dust and/or moisture in the air, please keep
the surface of the device clean and dry.
Do Not Operate in Humid Conditions
In order to avoid short circuiting to the interior of the device or electric
shock, please do not operate the instrument in a humid environment.
Do Not Operate in an Explosive Atmosphere
In order to avoid damage to the device or personal injury, it is important
to operate the device away from an explosive atmosphere.
\
4
General Safety Summary
Safety Terms and Symbols
Terms on the product. These terms may appear on the
product: DANGER Indicates direct injuries or hazards
that may happen. WARNING indicates potential
injuries or hazards that may happen.
CAUTION Indicates potential damages to the instrument or other property that may happen.
Symbols on the product. These symbols may appear on the product:
Warning
Hazardous Protective Earth
Voltage Earth Ground Ground
Chassis
Ground
5
General Care and Cleaning
Care
Do not store or leave the instrument in direct sunshine for extended periods of time.
Notice:
To avoid damages to the instrument, please do not leave it in fog, liquid, or solvent.
Clean
ing
Please perform the following steps to clean the instrument regularly according to its operating conditions.
1. Disconnect the instrument from all power sources, and then clean it with a soft cloth.
2. Clean the loose dust on the outside of the instrument with a soft cloth. When cleaning the LCD, take care to avoid scratching it.
Notice:
To avoid damages to the surface of the instrument, please do not use any corrosive liquid or chemical
cleanser. Make sure that the instrument is completely dry before restarting it to avoid short circuits or
personal injuries.
6
General Inspection
1.Inspect the shipping container
Keep the damaged shipping container or cushioning material until the contents of the shipment have been completely checked and the instrument has
passed both electrical and mechanical tests.
2. Inspect the instrument
If the instrument is found to be damaged, defective or fails in electrical or mechanical tests, please contact your sales representative.
3. Check the accessories
Please check the accessories according to the packing list. If the accessories are incomplete or damaged, please contact your sales representative.
7
Appearance and Dimension
Figure 1 Front View Figure 2 Top View
8
Adjust the Supporting Legs
Adjust the supporting legs properly to use them as stands to tilt the Spectrum Analyzer upwards for stable placement as well as easier operation and
observation of the instrument.
Before adjusting After adjusting
9
Connect to AC Power Supply
The Spectrum Analyzer accept 100-240V, 50/60/440Hz AC power supply. Please use the power cord provided as accessories to connect the instrument to
the power
source as shown in the figure below.
10
General Description
This model of spectrum analyzer has a frequency range from 9 kHz up to 2.1 GHz/3.2 GHz.It is lightweight, small and precise, offering a user friendly
interface, clear display with plenty of RF measurement functions. The product can be used for research and development, education, production,
maintenance and other relevant applications.
The Front Panel
1、User Graphical Interface
2、Menu Control Keys
3、Function Keys
4、Numeric Keyboard
5、Knob
6、Arrow Keys
7、RF Input
8、TG Output
9、Earphone interface
10、USB Host
11、Power Switch
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels RS PRO Instrument de mesure
RS PRO
RS PRO RS-8920 Manuel utilisateur
RS PRO
RS PRO RS-96 Manuel utilisateur
RS PRO
RS PRO RS-1340 Manuel utilisateur
RS PRO
RS PRO RS 155B Manuel utilisateur
RS PRO
RS PRO RS-5322 Manuel utilisateur
RS PRO
RS PRO RS-171V Manuel utilisateur
RS PRO
RS PRO RS-1360A Manuel utilisateur
RS PRO
RS PRO RS-92 Manuel utilisateur
RS PRO
RS PRO RS-3893 Manuel utilisateur
RS PRO
RS PRO RS-8809A Manuel utilisateur
RS PRO
RS PRO RS-3809 Manuel utilisateur
RS PRO
RS PRO IM-191 Manuel utilisateur
RS PRO
RS PRO RS-9968BT Manuel utilisateur
RS PRO
RS PRO IPM 3600N Manuel utilisateur
RS PRO
RS PRO 1389 Manuel utilisateur
RS PRO
RS PRO IM-740 Manuel utilisateur
RS PRO
RS PRO DT-388 Manuel utilisateur
RS PRO
RS PRO ICM A6N Manuel utilisateur
RS PRO
RS PRO RS-9883M Manuel utilisateur
RS PRO
RS PRO IPM 241 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur