Rosewill RNX-N2X Manuel utilisateur

Quick Installation Guide

Wireless Adapter RNX-N2X

The high-speed wireless USB 2.0 client adapter is the most convenient way to let you put a

desktop/notebook computer almost anywhere without the hassle of running network cables.

Now you don’t need to suffer from drilling holes and exposed cables. Once you are connected,

you can do anything, just like the wired network. This USB client adapter operates seamlessly in

2.4GHz frequency spectrum supporting the 802.11b, 802.11g, and 802.11nwireless standards.

It’s the best way to add wireless capability to your existing wired network or simply surf the web.

For advanced configuration, refer to the User’s Manual in the CD-ROM provided.

USB Adapter Description

The USB adapter is a standard USB adapter that fits into any USB interface. The USB adapter has two

LED indicators and a built-in antenna.

LINK LED Indicator

USB Connector

USB Adapter for Windows 2000/XP/Vista – Installation

During the installation, Vista may need to copy systems files from its installation CD. Therefore,

you may need a copy of the Windows installation CD at hand before installing the drivers.

Follow the steps below in order to install the USB adapter drivers:

1. Insert the CD-ROM that was provided to you in this package. The setup should run

automatically. If the setup does not run automatically, then you must manually select the

setup.exe file from the CD-ROM drive.

2. Once the setup begins you will see the InstallShield Wizard. Select Rosewill Configuration

Tool and then click on the Next> button.

Quick Installation Guide

Wireless Adapter RNX-N2X

3. Click on the Install button to begin the installation.

4. The installation is complete. Click on the Finish button.

Quick Installation Guide

Wireless Adapter RNX-N2X

5. Carefully insert the USB adapter into the USB port. Windows will then detect and

install the new hardware.

6. An Ricon will then appear in the system tray. Right click on the Ricon and then click on

Launch Config Utilities.

Note: Click on Use Zero Configuration as Configuration Utility if you would like to use

Windows Zero Config.

USB Adapter Adding a Profile – Windows 2000/XP/Vista

The Profile tab is used to store the settings of multiple Access Points such as home,

office, café, etc. When adding a profile you are required to enter a profile name and

SSID as well as configure the power-saving mode, network type, RTS/fragmentation

threshold and encryption/authentication settings.

Quick Installation Guide

Wireless Adapter RNX-N2X

1. Profile: Enter a name for the profile; this does not need to be the same as the SSID.

2. SSID: Enter the SSID of the network or select one from the drop-down list.

3. Network Type: Select Infrastructure from the drop-down list.

4. TX Power: Select a transmit power from the drop-down list..

5. Click on the Apply button to save the changes.

Laptop clip Hardware Installation/ Uninstallation

1. Connect laptop clip to RN

-N2

wireless adapter.

2. Connect laptop clip to Your Laptop

LCD monitor.

Warning:

Please be careful not to damage the

LCD monitor and laptop clip.

Quick Installation Guide

Wireless Adapter RNX-N2X

3. Uninstallation: Take off the laptop clip

from RNX-N2X as picture.

RNX-N2X Application Direction

A type ( For Laptop )

Connect to laptop by flexible

stainless steel extended

connector.

B type ( For Laptop )

C type ( For Desktop )

Connect to laptop by laptop clip

and USB Cable.

Connect to desktop by USB Cable

in your home or office.

Autres manuels pour RNX-N2X

Table des matières

Autres manuels Rosewill Adaptateur

Rosewill

Rosewill RNX-AC600NUB Manuel utilisateur

Rosewill

Rosewill RNX-N600PCE_v2.0 Manuel utilisateur

Rosewill

Rosewill RNX-N150NUB Manuel utilisateur

Rosewill

Rosewill RNX-N150NUBv2 Manuel utilisateur

Rosewill

Rosewill RNX-N150PC Manuel utilisateur

Rosewill

Rosewill RNX-N600PCE_v2.0 Manuel utilisateur

Rosewill

Rosewill RNX-N250UB Manuel utilisateur

Rosewill

Rosewill RPLC-200 Manuel utilisateur

Rosewill

Rosewill RX81-CW-DS BLK/SLV Manuel utilisateur

Rosewill

Rosewill RNX-N150PCX Manuel utilisateur

Rosewill

Rosewill RNX-N360PC Manuel utilisateur

Rosewill

Rosewill RC103 Manuel utilisateur

Rosewill

Rosewill RNX-AC1200PCEv2 Manuel utilisateur

Rosewill

Rosewill RC207 Manuel utilisateur

Rosewill

Rosewill RNX-AC1900UB Manuel utilisateur

Rosewill

Rosewill RNX-AC600HGUBEv2 Manuel utilisateur

Rosewill

Rosewill RNX-N1/N1MAC Manuel utilisateur

Rosewill

Rosewill RNX-N250UBE Manuel utilisateur

Rosewill

Rosewill RCAD-11001 Manuel utilisateur

Rosewill

Rosewill RNX-AC1200UB Manuel utilisateur

Rosewill

Rosewill RNX-N250PC Manuel utilisateur

Rosewill

Rosewill PW-AC5530U Manuel utilisateur

Rosewill

Rosewill RNX-N2X Manuel utilisateur

Rosewill

Rosewill RC-221 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur