Rosewill RNX-AC1900UB Manuel utilisateur
User Manual
RNX-AC1900UB
AC1900 Dual Band Wi-Fi USB Adapter
Copyright & Trademarks
FCC RF Radiation Exposure Statement
Specifications are subject to change without notice. is a registered
trademark of Rosewill, Inc. Other brands and product names are trademarks or
registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from Rosewill, Inc.
Copyright © 2018 Rosewill, Inc. All rights reserved.
www.rosewill.com
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter. This
equipment has been SAR-evaluated for use in hand. SAR measurements are
based on a 5 mm spacing from the body and that compliance is achieved at that
distance.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
SECTION 1: Product Overview
1.1 Introduction…………………………………….…..................... 05
1.2 LED Indicator………………………………….........…............. 05
1.3 Package Contents………………………………......................
1.4 Product Details………....................…………...…….…..........
SECTION 2: Quick Installation Guide
2.1 Hardware Installation…………………......................….......... 07
2.2 Software Installation……………............................................ 07
SECTION 3: Connect to a Wireless Network
3.1 Connect Using WPS…………………….................................
3.2 Connect Using Windows Built-In Wireles Utility……………..
SECTION 4: Utility Configuration
4.1 Connection Profile Management………………….................. 12
4.1.1 Add New Profile…………………….............................. 13
4.1.2 Remove Existing Profile…………………….................. 15
4.1.3 Edit Existing Profile………………………….................. 15
4.1.4 Make a Copy of Existing Profile…………..................... 16
4.1.5 Set Default Profile……………….................................. 16
4.2 View General Information and Network Status……….......... 17
4.2.1 General Information……………………........................ 17
4.2.2 Status…………………….............................................. 17
4.3 Miscellaneous Settings…………………………..................... 18
4.4 Establish Secure Connection with AP by WPS…………...... 19
SECTION 5: Soft-AP Function
5.1 Switch to AP Mode and Station Mode…………………......... 21
5.1.1 Configure SSID and Channel…………………….......... 22
5.1.2 Set Up Soft AP Security……………………….............. 23
5.2 Advanced Settings……………………………......................... 24
5.3 Wireless Statistics………………........................................... 25
Appendix A: Specifications………........................................... 26
Appendix B: Glossary………………......................................... 27
Appendix C: Troubleshooting………………............................ 30
Table of Contents
10
10
05
06
5
AC1900 Dual Band Wi-Fi USB Adapter User Manual
RNX-AC1900UB
SECTION 1: Product Overview
1.1 Introduction
The adapter is an 802.11ac client device designed to deliver high-speed
wireless performance for your computer. With a faster wireless connection,
you can get a better internet experience, such as downloading, gaming, and
video streaming. The incredible speed makes it ideal for handling multiple data
streams at the same time, which ensures your network remains stable and
smooth.
• Supports 2.4 GHz and 5 GHz frequency band
• Signal rate up to 1300 Mbps at 5 GHz, 600 Mbps at 2.4 GHz
• Supports USB 3.0 interface
• Supports IEEE 802.11ac/a/b/g/n
• Supports 64/128 bit WEP, WPA-PSK/WPA2-PSK
•
Supports Windows 7/8/8.1/10 (32/64-bit), Mac OS X (10.9 to 10.13), and Linux
• Supports Ad- Hoc and Infrastructure mode
• Supports WPS encryption method to simplify setup and operation
Note: The ‘adapter’ mentioned in this User Manual refers to RNX-AC1900UB,
AC1900 Dual Band Wi-Fi USB Adapter.
1.3 Package Contents
• 1 x AC1900 Dual Band Wi-Fi USB Adapter
• 1 x Magnetic USB 3.0 Cradle
• 1 x Quick Installation Guide
• 1 x Resource CD
1.2 LED Indicator
Status Working Status
On Data is being transmitted or received.
Flashing The adapter has been installed.
WPS connection is in process.
Off The adapter has been removed or not detected.
6
AC1900 Dual Band Wi-Fi USB Adapter User Manual
RNX-AC1900UB
1.4 Product Details
External USB Cradle
USB 3.0 Port
LED Indicator
WPS Button
Internal Antenna
7
AC1900 Dual Band Wi-Fi USB Adapter User Manual
RNX-AC1900UB
SECTION 2: Quick Installation Guide
Please install the adapter into your computer before installing the driver from
the Resource CD.
2.1 Hardware Installation
2.2 Software Installation
Insert the adapter into an empty USB 3.0 port of your computer or connect by
using the USB cradle provided.
The adapter’s Setup Wizard will guide you through the installation procedures.
The procedures in different Windows systems are similar; therefore we have
presented the procedures in Windows 10 as an example.
Note:
Please uninstall other Wi-Fi drivers before installing the driver. Installing two or
more Wi-Fi adapter drivers in one PC may cause conflicts between the drivers
and cause the Wi-Fi adapter to fail to work. You can find the installed Wi-Fi
adapter drivers and uninstall from the Control Panel -> Install and Uninstall
Software.
or
8
AC1900 Dual Band Wi-Fi USB Adapter User Manual
RNX-AC1900UB
Follow the steps below to install the driver on your Windows PC:
Insert the resource CD into your CD-ROM drive.
AutoRun window will pop up, click “Driver Installation” to begin.
*Browse the CD, if AutoRun window does not pop up. Double-click “Autorun.
exe” to start installation.
The InstallShield Wizard will start installing the driver automatically.
.
Figure 2-1
1.
2.
Figure 2-2
9
AC1900 Dual Band Wi-Fi USB Adapter User Manual
RNX-AC1900UB
3.
4.
After the driver and utility are installed successfully, you must reboot your
computer.
After restarting the computer, the Wi-Fi icon will appear at the lower-right
side in your system tray. To connect to a network, please refer to Section 3:
Connect to a Wireless Network.
Figure 2-3
10
AC1900 Dual Band Wi-Fi USB Adapter User Manual
RNX-AC1900UB
SECTION 3: Connect to a Wireless Network.
With both the hardware and software successfully installed into your computer,
you can quickly connect to a wireless network using one of the following
methods.
The procedures in different Windows systems are similar; therefore we have
presented the procedures in Windows 10 as an example.
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device
to an existing network quickly. By this method, you can connect to your network
quickly on the condition that your router or access point supports WPS (or
QSS, as is called by some products). You can establish a wireless connection
between wireless adapter and router using either Push Button Configuration
(PBC) method or PIN method.
3.1 Connect Using WPS
Windows users may use the built-in wireless utility to join a wireless network.
Follow the steps below:
Click the network icon at the bottom of your screen. A network
list will appear. Select your target SSID, and click “Connect”.
Figure 3-1
3.2 Connect Using Windows Built-In Wireless Utility
1.
Table des matières
Autres manuels Rosewill Adaptateur
Rosewill
Rosewill RNX-G1-G1W Manuel utilisateur
Rosewill
Rosewill RC208 Manuel utilisateur
Rosewill
Rosewill RNX-AC600HGUBEv2 Manuel utilisateur
Rosewill
Rosewill User for RNX-N100 RNX-N100 Manuel utilisateur
Rosewill
Rosewill RNX-N2LX Manuel utilisateur
Rosewill
Rosewill RNX-AC600UB Manuel utilisateur
Rosewill
Rosewill RNX-N250PC Manuel utilisateur
Rosewill
Rosewill RNX-N180PCE Manuel utilisateur
Rosewill
Rosewill User for RNX-N100 RNX-N100 Manuel utilisateur
Rosewill
Rosewill RCW608 Manuel utilisateur
Rosewill
Rosewill RNX-G1W Manuel utilisateur
Rosewill
Rosewill RNX-N1/N1MAC Manuel utilisateur
Rosewill
Rosewill RCW618 Manuel utilisateur
Rosewill
Rosewill RCW604 Manuel utilisateur
Rosewill
Rosewill AC1200UBE Manuel utilisateur
Rosewill
Rosewill RNX-N600PCE_v2.0 Manuel utilisateur
Rosewill
Rosewill RPLC-500 Manuel utilisateur
Rosewill
Rosewill RNX-N2X Manuel utilisateur
Rosewill
Rosewill RNX-G1LX Manuel utilisateur
Rosewill
Rosewill RNX-N1/N1MAC Manuel utilisateur
